Question 1

Yes. If you already have measurements or a specification, we produce to your figures rather than to a standard chart. Send the measurement points and

Accepted Answer

Producing to your exact measurements and specsYes. If you already have measurements or a specification, we produce to your figures rather than to a standard chart. Send the measurement points and how each one is taken, so there is no ambiguity later about where a measurement is read.In practice we build a measurement chart for your style, produce the sample against it, and you approve the fit on that sample. The approved sample and the chart then become the reference for bulk production and for any reorder.Where you have a physical garment rather than a chart, we can measure it and agree the points with you, because measuring the actual piece removes uncertainty about how a measurement is defined, such as chest at underarm or chest one inch below.Every measurement has a tolerance, since fabric and construction behave differently across sizes and after washing. The acceptable range is agreed with you rather than left open, and it is recorded with the specification.Send your chart, specification or reference garment and we will confirm what is needed to produce bags to your exact requirement.

Question 2

Large embroidered back patches can be applied to jackets, and they are planned with the pattern because a panel of that size has to sit correctly acro

Accepted Answer

Embroidered back patches on jacketsLarge embroidered back patches can be applied to jackets, and they are planned with the pattern because a panel of that size has to sit correctly across the back and clear the seams, the yoke and any pocket.The artwork is reviewed for the size and the stitch density, since a very detailed design at a large size can be heavy or lose definition; a patch or a combination of a patch and direct embroidery sometimes gives a cleaner result.The backing and the construction matter as much as the design, because the stabiliser used behind the embroidery affects how the panel behaves when the jacket is worn and washed.Placement and the final size are approved on the sample, so the patch sits where you expect on the actual garment rather than on a drawing.Send your artwork and the jacket style and we will confirm how the decoration can be produced.

Question 3

Our after-sales commitment is that if delivered goods do not match the agreed specification, we review the point promptly against the approved samp

Accepted Answer

What our after-sales commitment coversOur after-sales commitment is that if delivered goods do not match the agreed specification, we review the point promptly against the approved sample and the inspection records and agree a remedy with you.This works because the specification, sample approval and inspection records are documented, so the reference for any discussion already exists. Tell us with photos and the order reference as soon as possible after delivery.The remedy itself depends on the actual case and is agreed in writing rather than pre-set; it might be a correction, a replacement of affected pieces, or another solution both sides accept.We do not offer a blanket written guarantee beyond this, and any specific terms are those set out in your quotation or contract.Contact us with the order details and we will begin the review.Keeping the approved sample, the specification and the inspection records makes this process quick, because the standard we agreed is already documented and does not have to be re-established.Contact us as soon as possible if something is not as expected, so the goods can be checked while the shipment is still recent.

Question 4

The MOQ is 100 pieces per style, per colour, as it is for the rest of our range. Sizes can be mixed within one colourway to reach the minimum, while a

Accepted Answer

MOQ for custom jacketsThe MOQ is 100 pieces per style, per colour, as it is for the rest of our range. Sizes can be mixed within one colourway to reach the minimum, while a different colour is a separate order quantity.Jackets usually carry more trims and more panels than a basic top, so the specification is worth agreeing in detail before the sample: zips, linings, hardware and pocket construction all form part of the quotation.Decoration does not change the minimum, but the number of embroidery positions, patch sizes or print colours affects the work involved and therefore the price.A first order is often best kept to one or two colourways, so the style can be tested before a wider range is committed.Send your styles and quantities by size and colour and we will confirm the quotation.

Question 5

We value repeat business and price each order according to its quantity, style and materials, so a reorder is quoted on its own merits. Any conside

Accepted Answer

Pricing for repeat buyersWe value repeat business and price each order according to its quantity, style and materials, so a reorder is quoted on its own merits. Any consideration for repeat orders is confirmed in the quotation rather than promised in advance.Where volumes grow, unit cost usually improves because setup and material costs are spread over more pieces, and this is reflected in the quoted price for that quantity.The most practical way to keep cost down is a realistic order quantity across fewer styles and colours, since MOQ applies per style and per colour. Fewer colourways per style often cost less than many small runs.Because prices follow material and labour costs, the figure for each order is confirmed when you place it, and any agreed terms are set out in writing.Tell us your expected volume and we will quote accordingly.Where a client plans several orders across a season, it helps to discuss the overall volume early, so the pricing and the schedule can be planned around the whole programme rather than order by order.Any discount or special term is specific to the quoted order and is confirmed in writing, because material and labour costs change over time.

Question 6

Custom lining and hardware can be added to jackets, and both affect how the garment feels and wears. The lining choice changes warmth, drape and the i

Accepted Answer

Custom lining and hardwareCustom lining and hardware can be added to jackets, and both affect how the garment feels and wears. The lining choice changes warmth, drape and the inside finish, while the hardware changes the look and the function of the closures.Zip types, snaps, eyelets and cord locks are selected together with the design, and where you want branded metal parts the artwork and the material are checked for feasibility, since some custom components carry their own minimum and lead time.Lining colour and any woven or printed lining branding are agreed on the sample, because the inside of a jacket is part of the product experience even if it is not visible in photographs.Because these details sit within the construction, they are confirmed before development rather than added at the end, which avoids reworking the pattern.Send your trim and lining references and we will confirm the options for your order.

Question 7

We plan delivery dates carefully and keep you informed, but we do not promise a fixed date in advance, because timing depends on factors such as ma

Accepted Answer

On-time delivery — how we plan itWe plan delivery dates carefully and keep you informed, but we do not promise a fixed date in advance, because timing depends on factors such as material availability, the point of order confirmation and the workshop schedule at the time.What we can do is agree the production window when the order is confirmed, check the material position first because it is often the limiting factor, and update you if anything changes. The agreed dates are part of your order confirmation.As a general guide, sampling usually takes one to two weeks and bulk production around three to four weeks after sample approval, but the actual timing for your order is confirmed in writing for that order.For rush projects, discuss it early: deciding in advance which elements could be simplified is often faster than trying to compress production itself.Send your target date with the enquiry and we will confirm what is realistic for your order.Comfortable timing usually comes from planning early: confirming the specification, approving the sample without long gaps, and placing the bulk order so it fits the workshop schedule rather than competing with the busiest period.We would rather agree a realistic window and meet it than quote an optimistic date at the enquiry stage, so please share your target and any fixed deadline.

Question 8

Racing and moto-inspired jackets are built from the fabric and trims you choose, and these styles usually combine more than one material: a main shell

Accepted Answer

Materials for racing and moto stylesRacing and moto-inspired jackets are built from the fabric and trims you choose, and these styles usually combine more than one material: a main shell, contrast panels, often a lining and sometimes padding or a quilted element.Because the construction is more complex than a simple top, the specification is worth agreeing in detail before sampling: panel layout, zip type, collar shape, pocket positions and any protective-style detailing are all confirmed up front.Material availability drives what is possible, so we check what can be sourced for your colour and weight target and confirm it at the quotation stage rather than promising a fabric in advance.Decoration such as embroidered patches or printed graphics is planned with the panels, since a logo often sits across several pieces of the garment.Send your references and your material requirements and we will confirm what can be produced.

Question 9

The standard export packing is folded garments in polybags, packed into cartons with an order reference and a packing list. Sizes and colours are e

Accepted Answer

Standard export packagingThe standard export packing is folded garments in polybags, packed into cartons with an order reference and a packing list. Sizes and colours are either packed together or separated, according to how you plan to store and ship them.Carton labels and the packing list let you check the delivery against the order and route cartons onward without opening everything.If you need retail-ready packing, such as individual polybags with barcodes, branded bags or hangtags, this can be arranged and is specified before production, because it changes packing time and cost.Carton dimensions and weights are recorded for your logistics planning, and special requirements such as flat or hanging packing are confirmed in advance.Tell us your packing requirement and we will confirm the standard and the options for your order.The packing list and carton marks are prepared so you can receive the goods, check them against the order and forward cartons without opening every box.Where a retailer or warehouse has specific carton labelling requirements, send them before production so they can be applied during packing.

Question 10

Denim jackets and work jackets can be produced, and both depend on a considered construction: the panel layout, the topstitching, the hardware and the

Accepted Answer

Denim jackets and work jacketsDenim jackets and work jackets can be produced, and both depend on a considered construction: the panel layout, the topstitching, the hardware and the weight of the fabric all shape how the jacket reads.Washing and finishing apply to these styles as they do to denim bottoms, so the colour and the handfeel are agreed on a washed sample rather than on raw fabric.Hardware such as buttons, rivets and zip pulls is chosen with the design, because the colour and the size of the metal change the character of the jacket, and custom-branded parts are checked for feasibility and minimums.Decoration such as embroidery, patches or printed graphics is planned alongside the pattern, so the placement suits the panels and the pockets.Send your reference and fabric idea and we will confirm what can be produced for your order.

Question 11

After we review your enquiry we issue a written quotation covering the item, the quantity, the unit price and the terms, so you have a document to

Accepted Answer

Quotation and specification on paperAfter we review your enquiry we issue a written quotation covering the item, the quantity, the unit price and the terms, so you have a document to compare and approve rather than a figure given verbally.Alongside the quotation, the specification records what will actually be produced: fabric and weight, colour, measurements or size chart, construction details, decoration, labels and packing. This is the reference both sides work to.Where a detail is not yet fixed, it is marked so it can be agreed before production rather than assumed. Price and terms are confirmed in the quotation, and any order is subject to the agreed contract.If your internal process needs a specific format, tell us and we will follow it where possible.Send your requirement list and we will prepare the quotation and the specification for your review.It is worth checking that the specification matches what you expect before approving, especially measurements, colour, decoration and packing, since those are the details checked during production.Quotation validity depends on material and freight costs at the time, so the current figures are confirmed when you place the order.

Question 12

Varsity and bomber jackets can be produced with patches and other decoration, and these styles depend on their construction for the look: a rib collar

Accepted Answer

Varsity and bomber jackets with patchesVarsity and bomber jackets can be produced with patches and other decoration, and these styles depend on their construction for the look: a rib collar, cuffs and hem, a contrast sleeve or body, and a snap or zip front are all part of the specification.Patches are planned with the construction, because a chenille or embroidered patch sits on a panel and the size and placement need to suit the seam lines rather than a flat artwork file.Because these jackets combine several materials, the fabric and trim choices are agreed together, and the sample is where the contrast, the weight and the finish are checked as a whole.Where a body is built from two fabrics, colour consistency between them matters, so the references are approved alongside each other rather than separately.Send your references and artwork and we will confirm how the style can be produced.

Question 13

Our standard MOQ is 100 pieces per style, per color. The minimum applies to each individual style you order, rather than being a total across a who

Accepted Answer

MOQ for bagsOur standard MOQ is 100 pieces per style, per color. The minimum applies to each individual style you order, rather than being a total across a whole collection, so a brand can start with one design and still meet the requirement.Sizes can be mixed within one colorway to reach the minimum. For example, a single style and colour can be ordered as a spread of sizes such as S, M, L and XL totalling 100 pieces. Different colours are treated as separate orders, because each colour involves separate fabric or dye lots, separate cutting and separate setup.This structure exists to make small runs practical. Many factories require several hundred pieces per style, which forces young brands to tie up capital in inventory before they know what sells. A 100-piece minimum lets you test a design, gather real customer feedback and scale only what performs.If you are planning several styles, we confirm the minimum for each one in the written quotation and can suggest quantities that keep the first order efficient.

Question 14

A reorder can be placed in a different colourway. Because MOQ applies per style and per colour, a new colour is treated as its own order quantity,

Accepted Answer

Reordering in a new colourwayA reorder can be placed in a different colourway. Because MOQ applies per style and per colour, a new colour is treated as its own order quantity, so it does not simply join the quantity of the original colour.The practical steps are to confirm the new colour against a swatch or a lab dip, approve it before production, and check that the chosen fabric is available in that colour. Some colours are supported from stock and others need dyeing.Where the style already exists, the pattern and specification carry over, so the new colourway moves more quickly once the colour is approved.Colour approval is the key step: approving on a screen is less reliable than approving a physical swatch, because screens and lighting vary.Send the style, the new colour and the quantity and we will confirm what is possible.Where a colour needs dyeing rather than being held in stock, a lab dip is usually approved first, so the final shade is agreed before bulk rather than discovered afterwards.Because the style and pattern already exist, the main planning work for a new colourway is the colour approval and the fabric check.

Question 15

Custom hardware, zips and logos can be added to bags, and they are agreed with the specification so the same trims are used throughout the order. Zips

Accepted Answer

Hardware, zippers and logos on bagsCustom hardware, zips and logos can be added to bags, and they are agreed with the specification so the same trims are used throughout the order.Zips, sliders, buckles and rings are chosen by finish and size as well as by function, and where you want branded metal parts the artwork and material are checked for feasibility, since some custom components carry a minimum quantity and a lead time of their own.Logo application depends on the material: printing suits a flat fabric, embroidery suits a stable panel, and a patch or a metal plate suits a structured area, so the method is chosen with the design.Trims and attachments form part of quality control, since their strength and finish matter on a product that carries load, and they are checked before packing.Send your references, artwork and the details you want and we will confirm the options for your order.

Question 16

If delivered goods do not meet the agreed specification, tell us as soon as possible with photos and, where relevant, the carton and style referenc

Accepted Answer

After-sales supportIf delivered goods do not meet the agreed specification, tell us as soon as possible with photos and, where relevant, the carton and style references. We review the point against the approved sample and the inspection records, then agree with you how it will be resolved.Because the specification and approvals are documented, most questions can be settled by comparing the delivered goods with what was agreed before production. Where a correction or replacement is warranted, we agree the remedy and the timing with you in writing.For repeat clients we also review recurring points at the pattern or specification level, so the same issue does not return in the next production run.Remedy details depend on the actual case and are agreed with you rather than pre-set, and nothing is decided without reviewing the goods and the records.Contact us with the order reference and the details and we will start the review.It helps to raise a concern as soon as goods arrive, while the cartons and the packing list are still to hand, because that makes matching the issue to the order straightforward.Where a point relates to the specification rather than a one-off fault, we look at whether the specification itself should be adjusted for future runs.

Question 17

Bags can be produced in a range of materials, including canvas, cotton and polyester-based fabrics, and the choice affects how the bag holds its shape

Accepted Answer

Materials for custom bagsBags can be produced in a range of materials, including canvas, cotton and polyester-based fabrics, and the choice affects how the bag holds its shape and how it wears.Weight matters in a different way than on a garment, because the fabric has to carry load as well as look right, so a heavier, tighter weave is often chosen for a structured shape.Linings, webbing and reinforcements are specified with the shell, and these details affect how the bag performs as much as the outer fabric does.Fabric availability limits what is possible in a given colour, so we check what can be sourced for your specification and confirm it at the quotation stage.Tell us the shape and how the bag will be used and we will confirm the material options for your order.

Question 18

We keep your patterns and specifications so that reorders match the original. How long they are retained is best agreed in writing for your account

Accepted Answer

How long we keep your patternsWe keep your patterns and specifications so that reorders match the original. How long they are retained is best agreed in writing for your account, and we are happy to work to a period that fits your own planning.Keeping the pattern allows a repeat order to be produced without re-developing the fit, which saves time and reduces the risk of small differences appearing between runs.If you would prefer your files not to be retained, we can return or delete them on request after an order, and the arrangement is confirmed with you rather than assumed.Where a design is exclusive, retention is tied to your agreement with us, so your material is not used for anyone else.Tell us your retention preference and we will confirm it in writing.Digital pattern files and the original specification are kept together, so a future order starts from the same reference and the fit does not drift between runs.If a fit was updated at any point, tell us before the reorder so the correct version of the pattern is used rather than an earlier one.

Question 19

Common bag types can be produced, including tote styles, crossbody shapes and backpacks, subject to the material and the construction you choose. Each

Accepted Answer

Bag types we can produceCommon bag types can be produced, including tote styles, crossbody shapes and backpacks, subject to the material and the construction you choose.Each type has its own construction, such as the panel layout, the handle or strap arrangement, the closure and any internal pockets, so the design is agreed from a reference or a specification rather than from a type name alone.Where a shape is not standard, we can review a photograph or a sample and confirm whether it can be produced, since some structures need specific components and a minimum quantity.Decoration is planned with the construction, because a logo on a bag may be printed, embroidered or applied as a patch, and the position depends on the panels.Tell us the bag types you are considering and we will confirm what can be produced for your order.

Question 20

A reorder is normally simpler than a first order because the pattern, specification and approvals already exist. It still needs a fresh order confi

Accepted Answer

Reorders: process and timingA reorder is normally simpler than a first order because the pattern, specification and approvals already exist. It still needs a fresh order confirmation, since MOQ applies per style and per colour and materials must be checked again for availability.To place a reorder, send the original style reference, the quantity by size and colour, and any changes you want. We confirm availability of the same fabric and the current price, then produce after your confirmation.Lead time for a reorder is usually shorter than the initial run because development is already complete, but it still depends on fabric availability and the workshop schedule at the time, which we confirm when you place the order.Planning early is the most reliable way to keep timing comfortable, especially ahead of peak season when capacity is booked further in advance.Send your reorder reference and quantities and we will confirm price and timing.Changes to decoration, labels or packing can usually be handled in a reorder, but it helps to state them clearly at the beginning so the specification and the price reflect them.Because materials are checked again, a reorder placed early in the season is easier to schedule than one placed when fabric is already committed elsewhere.

Question 21

A reorder can be placed in a different colourway. Because MOQ applies per style and per colour, a new colour is treated as its own order quantity,

Accepted Answer

Reordering in a new colourwayA reorder can be placed in a different colourway. Because MOQ applies per style and per colour, a new colour is treated as its own order quantity, so it does not simply join the quantity of the original colour.The practical steps are to confirm the new colour against a swatch or a lab dip, approve it before production, and check that the chosen fabric is available in that colour. Some colours are supported from stock and others need dyeing.Where the style already exists, the pattern and specification carry over, so the new colourway moves more quickly once the colour is approved.Colour approval is the key step: approving on a screen is less reliable than approving a physical swatch, because screens and lighting vary.Send the style, the new colour and the quantity and we will confirm what is possible.Where a colour needs dyeing rather than being held in stock, a lab dip is usually approved first, so the final shade is agreed before bulk rather than discovered afterwards.Because the style and pattern already exist, the main planning work for a new colourway is the colour approval and the fabric check.

Question 22

A competitive mix usually has a clear core, a few seasonal pieces, and accessories that lift average order value at low risk. We can help by mappin

Accepted Answer

Building a competitive product mixA competitive mix usually has a clear core, a few seasonal pieces, and accessories that lift average order value at low risk. We can help by mapping styles to categories and suggesting constructions that fit your price points.The practical approach is to define your entry-level, core and premium tiers, then confirm the fabric and construction that makes each tier credible. This keeps the range coherent instead of a random set of styles.Because our MOQ applies per style and per colour, a mix is planned style by style, so we can sequence the first order around the pieces that matter most to your launch.Any suggestion we give is general guidance based on what we produce rather than a guarantee of sales, and your own market data should lead the decision.Send your price points and categories and we will help structure the mix.Accessories and smaller items can also lift a range at modest cost, because they share branding and packing with the main styles and reduce the risk of a single product failing.Once the tiers are set, the first order can be sequenced so the highest-importance pieces are developed and produced first.

Question 23

If delivered goods do not meet the agreed specification, tell us as soon as possible with photos and, where relevant, the carton and style referenc

Accepted Answer

After-sales supportIf delivered goods do not meet the agreed specification, tell us as soon as possible with photos and, where relevant, the carton and style references. We review the point against the approved sample and the inspection records, then agree with you how it will be resolved.Because the specification and approvals are documented, most questions can be settled by comparing the delivered goods with what was agreed before production. Where a correction or replacement is warranted, we agree the remedy and the timing with you in writing.For repeat clients we also review recurring points at the pattern or specification level, so the same issue does not return in the next production run.Remedy details depend on the actual case and are agreed with you rather than pre-set, and nothing is decided without reviewing the goods and the records.Contact us with the order reference and the details and we will start the review.It helps to raise a concern as soon as goods arrive, while the cartons and the packing list are still to hand, because that makes matching the issue to the order straightforward.Where a point relates to the specification rather than a one-off fault, we look at whether the specification itself should be adjusted for future runs.

Question 24

Across US and EU streetwear, the categories that recur are heavyweight tees, hoodies and sweatshirts, relaxed-fit bottoms, overshirts and simple ac

Accepted Answer

Styles that perform in US and EU streetwearAcross US and EU streetwear, the categories that recur are heavyweight tees, hoodies and sweatshirts, relaxed-fit bottoms, overshirts and simple accessories. These are recurring categories rather than a promise of performance in your particular market.What tends to separate success is the execution: fabric weight and handfeel, a fit that matches the brand's audience, durable decoration and consistent quality on reorder. Two brands can sell the same category with very different results.The practical way to test is to launch a small number of core pieces, see which resonate with your customers, and then reorder the winners rather than expanding the range too early.We can produce any of these categories to your specification; which will sell in your market depends on your customers and your positioning.Share your market and target price and we will suggest styles to consider.Testing in small quantities before a large commitment is usually cheaper than correcting an overstocked style afterwards. Launch a few pieces, read the response, then reorder what works.Execution details such as fabric weight, print durability and consistent sizing on reorder often matter more to repeat sales than the category itself.

Question 25

We keep your patterns and specifications so that reorders match the original. How long they are retained is best agreed in writing for your account

Accepted Answer

How long we keep your patternsWe keep your patterns and specifications so that reorders match the original. How long they are retained is best agreed in writing for your account, and we are happy to work to a period that fits your own planning.Keeping the pattern allows a repeat order to be produced without re-developing the fit, which saves time and reduces the risk of small differences appearing between runs.If you would prefer your files not to be retained, we can return or delete them on request after an order, and the arrangement is confirmed with you rather than assumed.Where a design is exclusive, retention is tied to your agreement with us, so your material is not used for anyone else.Tell us your retention preference and we will confirm it in writing.Digital pattern files and the original specification are kept together, so a future order starts from the same reference and the fit does not drift between runs.If a fit was updated at any point, tell us before the reorder so the correct version of the pattern is used rather than an earlier one.

Question 26

We can share what we see being produced across our client base and the construction details that recur, such as heavier cottons, relaxed and boxy f

Accepted Answer

Choosing what to stock next seasonWe can share what we see being produced across our client base and the construction details that recur, such as heavier cottons, relaxed and boxy fits, washed and garment-dyed finishes, and layered branding. The final buying decision rests on your own customers' data.The useful approach is to balance a small number of trend-led pieces with dependable core styles, so a trend that fades does not leave stock stranded. Your own sell-through, rather than our opinion, should drive volume.Because MOQ applies per style and per colour, it is usually better to test a new direction in one or two colourways, then reorder what works in the same colours or add new ones later.Any trend commentary we give is general observation and is not a forecast or a promise of sales; market conditions vary by region and by season.Tell us your target market and price point and we will suggest styles to consider.It also helps to agree which pieces are core and which are tests. Core styles can be planned in larger quantities, while a trend piece is often safer in one or two colourways at the minimum quantity.Because the same pattern supports a reorder, a piece that performs can be repeated quickly in the same colour or extended into new ones.

Question 27

A reorder is normally simpler than a first order because the pattern, specification and approvals already exist. It still needs a fresh order confi

Accepted Answer

Reorders: process and timingA reorder is normally simpler than a first order because the pattern, specification and approvals already exist. It still needs a fresh order confirmation, since MOQ applies per style and per colour and materials must be checked again for availability.To place a reorder, send the original style reference, the quantity by size and colour, and any changes you want. We confirm availability of the same fabric and the current price, then produce after your confirmation.Lead time for a reorder is usually shorter than the initial run because development is already complete, but it still depends on fabric availability and the workshop schedule at the time, which we confirm when you place the order.Planning early is the most reliable way to keep timing comfortable, especially ahead of peak season when capacity is booked further in advance.Send your reorder reference and quantities and we will confirm price and timing.Changes to decoration, labels or packing can usually be handled in a reorder, but it helps to state them clearly at the beginning so the specification and the price reflect them.Because materials are checked again, a reorder placed early in the season is easier to schedule than one placed when fabric is already committed elsewhere.

Question 28

We can support a launch that needs more than one style. Because we produce tops, bottoms, outerwear and accessories, a first range can be developed

Accepted Answer

Supporting a full range launchWe can support a launch that needs more than one style. Because we produce tops, bottoms, outerwear and accessories, a first range can be developed as a set rather than as unrelated pieces from different suppliers.The practical way to start is a small development group, one or two pieces per category, so you confirm fit, fabric and branding before committing to the full range. This spreads development cost and time across several styles.Where you are launching, we can also sequence production so the styles you plan to sell first are completed first, spreading delivery across the season rather than concentrating everything into a single shipment.MOQ applies per style and per colour, so a range is planned style by style, and the exact structure is confirmed in your quotation.Send your range plan and we will confirm how to develop it.Planning the size curve early also helps, because a range that spans several categories needs a consistent fit language. Agreeing that on the first development pieces saves correction later.Delivery can be staggered across the season, which spreads cash flow and lets you react to early sales before the full range is committed.

Question 29

A competitive mix usually has a clear core, a few seasonal pieces, and accessories that lift average order value at low risk. We can help by mappin

Accepted Answer

Building a competitive product mixA competitive mix usually has a clear core, a few seasonal pieces, and accessories that lift average order value at low risk. We can help by mapping styles to categories and suggesting constructions that fit your price points.The practical approach is to define your entry-level, core and premium tiers, then confirm the fabric and construction that makes each tier credible. This keeps the range coherent instead of a random set of styles.Because our MOQ applies per style and per colour, a mix is planned style by style, so we can sequence the first order around the pieces that matter most to your launch.Any suggestion we give is general guidance based on what we produce rather than a guarantee of sales, and your own market data should lead the decision.Send your price points and categories and we will help structure the mix.Accessories and smaller items can also lift a range at modest cost, because they share branding and packing with the main styles and reduce the risk of a single product failing.Once the tiers are set, the first order can be sequenced so the highest-importance pieces are developed and produced first.

Question 30

Protecting an exclusive design means it is produced only for you. We do not sell your patterns, artwork or finished goods to other customers, and y

Accepted Answer

Keeping exclusive designs exclusiveProtecting an exclusive design means it is produced only for you. We do not sell your patterns, artwork or finished goods to other customers, and your files are used only for your own orders.In practice this can be supported by an NDA, by limiting internal access to the team on your order, and by agreeing in writing that the design is exclusive to your brand.Where you want extra assurance, the specific terms, such as the scope and duration of exclusivity, are set out in your agreement with us so both sides know exactly what is covered.We can also return or delete your files at your request once an order is complete, where you prefer not to leave material with us.Tell us what exclusivity you need and we will confirm the arrangement in writing.It also helps to be explicit about what exclusivity covers: a single style, a category, or an entire range, and whether it is permanent or for a fixed period. Being precise avoids misunderstanding on both sides.In day-to-day practice, exclusivity is protected by keeping your patterns, artwork and finished goods out of any other customer's production, and by limiting access to the team working on your order.

Streetwear Manufacturing FAQ

Are you looking for a reliable manufacturer?

Products

Customization

Business Model

Capability

About Us