Question 1

If delivered goods do not meet the agreed specification, tell us as soon as possible with photos and, where relevant, the carton and style referenc

Accepted Answer

Do you offer after-sales support if shorts does not meet expectationsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Special techniques are tested on the actual material, because they behave differently across fabrics.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.Warranty, returns and replacement are commercial terms rather than production details, so they are set out in the contract and confirmed with your order instead of being stated as a general promise.

Question 2

We can support a launch that needs more than one style. Because we produce tops, bottoms, outerwear and accessories, a first range can be developed

Accepted Answer

Can you support my own brand launch with a full hoodies & sweatshirts rangeThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..Size approval happens on the sample, and the approved size set stays with the order for future repeats.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Production checks happen at cutting, at sewing, at finishing and before packing.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 3

We keep your patterns and specifications so that reorders match the original. How long they are retained is best agreed in writing for your account

Accepted Answer

How long do you keep my shorts patterns for future reordersA repeat order is only as consistent as the specification that was written down before the first run.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.The approved sample is kept as the working reference so a repeat order behaves like the first one.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Lead time is relatively short because shorts use less fabric, but the finish and decoration steps still run in sequence.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 4

A reorder is normally simpler than a first order because the pattern, specification and approvals already exist. It still needs a fresh order confi

Accepted Answer

What is your reorder process and lead time for shortsThe schedule depends on the number of processes in a style, which is why two items in the same category can finish weeks apart.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Decoration placement and technique are settled on the physical sample instead of on a screen.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.We would rather raise a risk before sampling than discover it during bulk production.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 5

A competitive mix usually has a clear core, a few seasonal pieces, and accessories that lift average order value at low risk. We can help by mappin

Accepted Answer

Can you help me build a competitive product mix around shortsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.The approved sample is kept as the working reference so a repeat order behaves like the first one.Freight is quoted as its own line so the transit cost is visible before the goods are finished.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Lead time is relatively short because shorts use less fabric, but the finish and decoration steps still run in sequence.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 6

Across US and EU streetwear, the categories that recur are heavyweight tees, hoodies and sweatshirts, relaxed-fit bottoms, overshirts and simple ac

Accepted Answer

Which shorts styles sell best for streetwear brands in the US and EUThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Freight is quoted as its own line so the transit cost is visible before the goods are finished.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 7

We can share what we see being produced across our client base and the construction details that recur, such as heavier cottons, relaxed and boxy f

Accepted Answer

What streetwear trends should I stock in shorts for next seasonThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Inspection covers inseam measurement, pocket placement and waistband elastic recovery.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 8

We can support a launch that needs more than one style. Because we produce tops, bottoms, outerwear and accessories, a first range can be developed

Accepted Answer

Can you support my own brand launch with a full shorts rangeThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Production checks happen at cutting, at sewing, at finishing and before packing.Washing matters most on denim shorts and on terry, where softness and surface effect change the hand feel.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 9

Protecting an exclusive design means it is produced only for you. We do not sell your patterns, artwork or finished goods to other customers, and y

Accepted Answer

Do you protect my exclusive shorts designs from being resoldThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.Ownership, exclusivity and confidentiality are contractual terms, agreed in writing before development starts rather than assumed from a conversation.

Question 10

We can sign a non-disclosure agreement before reviewing your designs, tech packs or samples. This is common for brands with original artwork or pro

Accepted Answer

Do you sign an NDA before producing my shorts designsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.The approved sample is kept as the working reference so a repeat order behaves like the first one.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Decoration placement and technique are settled on the physical sample instead of on a screen.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.Ownership, exclusivity and confidentiality are contractual terms, agreed in writing before development starts rather than assumed from a conversation.

Question 11

We can apply your logo to the elements your customers see: neck labels, care labels, hangtags, woven patches, printed or embroidered branding, and

Accepted Answer

Can you white-label shorts with my logo on labels and packagingPackaging is specified with the style rather than decided at the end, so the goods arrive ready for your own labelling.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Size approval happens on the sample, and the approved size set stays with the order for future repeats.A purchase order is matched to the approved sample, which is the reference both sides measure against.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Bulk production starts once the sample is approved in writing, not while the specification is still moving.A written brief shortens the first round, since the specification can be confirmed before sampling begins.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 12

Bulk export packing is designed to protect the goods and move efficiently. Garments are usually folded and packed into polybags, then into export c

Accepted Answer

How is hoodies & sweatshirts packaged for bulk exportExport packaging has to protect the goods in transit and stay consistent between the first order and the reorder.Embroidery on heavy fleece needs correct backing to avoid puckering, while puff and cracked print need testing against the fabric surface. Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length..Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.The approved sample is kept as the working reference so a repeat order behaves like the first one.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Decoration placement and technique are settled on the physical sample instead of on a screen.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Lead time rises with wash steps and with any multi-placement decoration, because each placement is set up separately.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 13

The difference is who creates the product. In OEM you supply the design and we build to it exactly; in ODM we take part in creating the design, adv

Accepted Answer

What is the difference between your OEM and ODM service for shortsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Decoration placement and technique are settled on the physical sample instead of on a screen.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 14

Producing under your own brand and private label is a core part of what we do. Your brand can appear on the neck label, care label, hangtag, packag

Accepted Answer

Can you produce shorts under my own brand and private labelThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 15

We offer both OEM and ODM. In OEM, you bring the design, tech pack or reference sample and we manufacture to your specification. In ODM, we help de

Accepted Answer

Do you offer OEM and ODM services for shortsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.We would rather raise a risk before sampling than discover it during bulk production.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Bulk production starts once the sample is approved in writing, not while the specification is still moving.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Lead time is relatively short because shorts use less fabric, but the finish and decoration steps still run in sequence.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 16

We are a direct apparel manufacturer with our own production base in Dongguan, China, and more than 20 years of experience. We are not a trading co

Accepted Answer

Are you a manufacturer or a trading company for shortsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Freight is quoted as its own line so the transit cost is visible before the goods are finished.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.We would rather raise a risk before sampling than discover it during bulk production.Production checks happen at cutting, at sewing, at finishing and before packing.Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 17

We ship worldwide by sea, air and express courier, and the right method depends on your order size, budget and how urgently you need the goods. Sma

Accepted Answer

How do you ship hoodies & sweatshirts internationallyShipping is quoted as its own line so you can weigh the transit time against the budget rather than discover it at the end.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Production checks happen at cutting, at sewing, at finishing and before packing.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 18

We are a manufacturer and normally ship bulk orders to your warehouse or your nominated forwarder. Direct-to-consumer shipping is a different model

Accepted Answer

Do you drop-ship shorts directly to my customersFreight choice is a trade-off between your drop date and your landed cost, and it is set per order.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..A written brief shortens the first round, since the specification can be confirmed before sampling begins.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Lead time is relatively short because shorts use less fabric, but the finish and decoration steps still run in sequence.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.Whether goods can ship directly to end customers depends on the destination and the documentation, so it is confirmed per order rather than offered as a standard service.

Question 19

Bulk export packing is designed to protect the goods and move efficiently. Garments are usually folded and packed into polybags, then into export c

Accepted Answer

How is shorts packaged for bulk exportExport packaging has to protect the goods in transit and stay consistent between the first order and the reorder.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Special techniques are tested on the actual material, because they behave differently across fabrics.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Decoration placement and technique are settled on the physical sample instead of on a screen.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.A purchase order is matched to the approved sample, which is the reference both sides measure against.Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 20

If you buy several products from different suppliers, we can sometimes receive and combine goods so they travel in one shipment, which can reduce f

Accepted Answer

Can you consolidate shorts with other products in one shipmentFreight choice is a trade-off between your drop date and your landed cost, and it is set per order.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Lead time is relatively short because shorts use less fabric, but the finish and decoration steps still run in sequence.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 21

These Incoterms describe where our responsibility ends and yours begins. EXW means the goods are collected from our factory; FOB means we deliver t

Accepted Answer

Do you offer DDP, FOB, or EXW for shortsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Freight is quoted as its own line so the transit cost is visible before the goods are finished.Special techniques are tested on the actual material, because they behave differently across fabrics.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 22

Shipping cost depends on the weight or volume of the shipment, the route, the method and the Incoterm, so it is quoted per order rather than set as

Accepted Answer

What is the shipping cost and transit time for shortsShipping is quoted as its own line so you can weigh the transit time against the budget rather than discover it at the end.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..A written brief shortens the first round, since the specification can be confirmed before sampling begins.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 23

We ship worldwide by sea, air and express courier, and the right method depends on your order size, budget and how urgently you need the goods. Sma

Accepted Answer

How do you ship shorts internationallyShipping is quoted as its own line so you can weigh the transit time against the budget rather than discover it at the end.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.The approved sample is kept as the working reference so a repeat order behaves like the first one.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Special techniques are tested on the actual material, because they behave differently across fabrics.Washing matters most on denim shorts and on terry, where softness and surface effect change the hand feel.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 24

Social-compliance schemes such as BSCI or Sedex relate to a specific factory and a specific audit, and the documents that satisfy your buyer depend

Accepted Answer

Do you offer BSCI or Sedex audited factory documentation for shortsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Decoration placement and technique are settled on the physical sample instead of on a screen.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.We hold BSCI social compliance certification. Other schemes, including material certifications such as OEKO-TEX, are confirmed per project at quotation stage, and a scheme that has not been confirmed for your order is not claimed on our side.

Question 25

CPSIA in the United States and REACH in the European Union set limits on substances in apparel and accessories. Whether your order is affected depe

Accepted Answer

Can you meet CPSIA or REACH requirements for shortsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.We hold BSCI social compliance certification. Other schemes, including material certifications such as OEKO-TEX, are confirmed per project at quotation stage, and a scheme that has not been confirmed for your order is not claimed on our side.

Question 26

Yes. You are welcome to arrange a third-party inspection before shipment. Third-party checks are common on larger orders, and we cooperate with the

Accepted Answer

Can I send a third-party inspector to check hoodies & sweatshirts productionThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery on heavy fleece needs correct backing to avoid puckering, while puff and cracked print need testing against the fabric surface. Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length..The approved sample is kept as the working reference so a repeat order behaves like the first one.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Special techniques are tested on the actual material, because they behave differently across fabrics.Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 27

Reports such as OEKO-TEX or SGS-type test reports are normally issued by independent laboratories on specific materials. Whether a report already e

Accepted Answer

Do you provide test reports such as OEKO-TEX or SGS for shortsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.We would rather raise a risk before sampling than discover it during bulk production.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.We hold BSCI social compliance certification. Other schemes, including material certifications such as OEKO-TEX, are confirmed per project at quotation stage, and a scheme that has not been confirmed for your order is not claimed on our side.

Question 28

Apparel sold in the EU and US must meet rules on labelling, fibre content, care instructions and restricted substances. Whether a particular order

Accepted Answer

Are your shorts compliant with EU and US apparel regulationsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Size approval happens on the sample, and the approved size set stays with the order for future repeats.A purchase order is matched to the approved sample, which is the reference both sides measure against.Lead time is relatively short because shorts use less fabric, but the finish and decoration steps still run in sequence.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 29

We do not publish a fixed list of certificates in advance, because which documents apply depends on the fabric, the process and the market you sell

Accepted Answer

What certifications do you hold for shorts productionCompliance is confirmed per project as well as at company level, since the fibre content of a style decides which material certifications apply.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.A purchase order is matched to the approved sample, which is the reference both sides measure against.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 30

We can provide inspection records and photos for your order, and where a third-party inspection has been arranged, the report is issued by the insp

Accepted Answer

Do you provide a quality inspection report with shorts shipmentsEach stage leaves a checkpoint behind it, which is what makes a defect traceable instead of a surprise.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Decoration placement and technique are settled on the physical sample instead of on a screen.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Lead time is relatively short because shorts use less fabric, but the finish and decoration steps still run in sequence.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.The payment schedule, inspection arrangements and any balance release are set out in the contract and confirmed in the quotation before production begins.

FAQs

Are you looking for a reliable manufacturer?

Products

Customization

Business Model

Capability

About Us