Question 1

The unit price of bags depends on several elements: fabric and weight, construction and fit complexity, decoration such as printing, embroidery or

Accepted Answer

How unit price is calculatedThe unit price of bags depends on several elements: fabric and weight, construction and fit complexity, decoration such as printing, embroidery or washing, labels and packaging, and the total quantity you order. Each of these changes the cost structure, which is why we quote per project rather than from a fixed price list.Fixed costs, including pattern development, machine setup, screen or embroidery setup and packing preparation, are spread across the number of pieces produced. That is why larger volumes normally bring a lower unit price: the same fixed cost is divided by more units.To make comparison easy, we provide an itemized quotation showing the main cost elements, and we can quote two or three quantity levels so you can see how the price changes with volume. If your design is still evolving, we can also indicate which specification choices have the biggest effect on cost.Send your design and target quantities and we will prepare a clear, itemized quotation for your project.It helps to think of the minimum as a per-colourway figure. One style in one colour is one minimum; the same style in three colours is three. Mixed sizes inside a colourway are normal and expected, which is why a size curve can be built around the figure rather than the other way round.Every order starts from a physical sample rather than a screen. Sampling is charged and quoted before work begins, the fee is offset only when the bulk volume is large enough, and the process takes about two weeks. The approved sample then becomes the reference document for the bulk run, including fabric, colour, decoration placement and construction.

Question 2

Yes. With an MOQ of 100 pieces per style, per color, you can place a trial order before committing to a larger production run. This is the approach

Accepted Answer

Can I order bags in small trial quantities before bulk productionThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Screen print and embroidery both work on canvas, while webbing labels and rubber patches suit utility styling. Checks concentrate on strap pull strength, zip function and seam integrity at the base..Special techniques are tested on the actual material, because they behave differently across fabrics.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Lead time depends on the number of hardware components and lining panels, as each adds a separate assembly step.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 3

Our standard MOQ is 100 pieces per style, per color. The minimum applies to each individual style you order, rather than being a total across a who

Accepted Answer

What is the MOQ for Custom BagsMinimums are about setup cost: fabric, cutting and finishing each carry a fixed step that does not shrink with volume.Screen print and embroidery both work on canvas, while webbing labels and rubber patches suit utility styling. Checks concentrate on strap pull strength, zip function and seam integrity at the base..Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.A purchase order is matched to the approved sample, which is the reference both sides measure against.We would rather raise a risk before sampling than discover it during bulk production.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Handle attachment, base reinforcement and zip quality are the structural decisions, and a bag that fails usually fails at the strap join rather than the shell.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 4

If goods do not meet the agreed specification, contact us as soon as possible with photographs, the style reference and, where relevant, the carton nu

Accepted Answer

What is your policy on Custom Shorts returns for quality issuesQuality is built into specific stages rather than inspected in at the end, so the checkpoints matter more than a general promise.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..The approved sample is kept as the working reference so a repeat order behaves like the first one.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Special techniques are tested on the actual material, because they behave differently across fabrics.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.Warranty, returns and replacement are commercial terms rather than production details, so they are set out in the contract and confirmed with your order instead of being stated as a general promise.

Question 5

Colour is approved before production, so bulk goods are made to an agreed reference rather than to an expectation. Depending on the material, approval

Accepted Answer

Do you offer color card approval before Custom Shorts productionThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Size approval happens on the sample, and the approved size set stays with the order for future repeats.A purchase order is matched to the approved sample, which is the reference both sides measure against.Lead time is relatively short because shorts use less fabric, but the finish and decoration steps still run in sequence.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 6

Crewneck sweatshirts can be produced as well as hooded styles, and building both from the same fabric and fit keeps a range coherent rather than looki

Accepted Answer

Do you offer crewneck sweatshirts as well as hoodiesThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Crewneck bodies use loopback, brushed fleece or French terry, and the fleece weight decides how the body holds up after repeated washing. Neckline ribbing, cuff tension and body length are the fit variables, and a correctly tensioned neck rib is what stops the collar stretching out..A purchase order is matched to the approved sample, which is the reference both sides measure against.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Special techniques are tested on the actual material, because they behave differently across fabrics.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 7

Grading means applying consistent increments between sizes so the fit stays right as the size changes. We agree the base size and the increments with

Accepted Answer

Size grading across a full rangeGrading means applying consistent increments between sizes so the fit stays right as the size changes. We agree the base size and the increments with you, then apply them across the whole range rather than scaling a single size by eye.In practice the base size is approved first, because the increments follow from a fit you are happy with. Once the base is confirmed, the pattern is graded across the range and the result is checked on a graded sample before bulk production.For extended or plus sizes, grading is handled with extra care, because increments that work in the middle of a range often need adjusting at the extremes. Testing one extended size early in development is much cheaper than correcting it after bulk.The graded chart is documented, so a reorder or a new colourway follows the same fit rather than being re-graded, which keeps shorts consistent between production runs.Send your target size range and base size and we will confirm the grading approach for your order.The minimum is 100 pieces per style, per color, not per order. Sizes can be mixed inside one colourway to reach that figure, so a single design in a single colour is the easiest way to start. Each additional colour is treated as its own minimum, because a new colour means a different fabric reservation, a separate cut and often a separate decoration setup.Bulk production takes three to four weeks after sample approval. That window covers fabric arrival, cutting, sewing, decoration and finishing, and it starts from the approved sample rather than from the enquiry date. Freight planning belongs at the same stage, because sea, air and land options differ in transit time and cost.

Question 8

Custom drawcords and metal eyelets can be added to hoodies, and they are agreed with the specification so the same trim is used through the order. Cor

Accepted Answer

Can you add custom drawcords and metal eyelets to hoodiesThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.A purchase order is matched to the approved sample, which is the reference both sides measure against.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.The approved sample is kept as the working reference so a repeat order behaves like the first one.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 9

Yes. If you already have measurements or a specification, we produce to your figures rather than to a standard chart. Send the measurement points and

Accepted Answer

Producing to your exact measurements and specsYes. If you already have measurements or a specification, we produce to your figures rather than to a standard chart. Send the measurement points and how each one is taken, so there is no ambiguity later about where a measurement is read.In practice we build a measurement chart for your style, produce the sample against it, and you approve the fit on that sample. The approved sample and the chart then become the reference for bulk production and for any reorder.Where you have a physical garment rather than a chart, we can measure it and agree the points with you, because measuring the actual piece removes uncertainty about how a measurement is defined, such as chest at underarm or chest one inch below.Every measurement has a tolerance, since fabric and construction behave differently across sizes and after washing. The acceptable range is agreed with you rather than left open, and it is recorded with the specification.Send your chart, specification or reference garment and we will confirm what is needed to produce shorts to your exact requirement.The minimum is 100 pieces per style, per color, not per order. Sizes can be mixed inside one colourway to reach that figure, so a single design in a single colour is the easiest way to start. Each additional colour is treated as its own minimum, because a new colour means a different fabric reservation, a separate cut and often a separate decoration setup.

Question 10

Full-zip, half-zip and pullover constructions can all be produced, and the difference is structural as well as visual. A full-zip needs a front placke

Accepted Answer

Do you offer full-zip, half-zip, and pullover hoodiesThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Special techniques are tested on the actual material, because they behave differently across fabrics.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Decoration placement and technique are settled on the physical sample instead of on a screen.Garment dye and vintage washes are widely used, and each added wash step means another development round and another shade-matching check across the batch.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 11

Our after-sales commitment is that if delivered goods do not match the agreed specification, we review the point promptly against the approved samp

Accepted Answer

What after-sales confirm do you provide for Custom ShortsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.Dates and outcomes are confirmed in writing rather than promised in advance, and where something cannot be confirmed we say so before an order is placed.Warranty, returns and replacement are commercial terms rather than production details, so they are set out in the contract and confirmed with your order instead of being stated as a general promise.

Question 12

The MOQ is 100 pieces per style, per colour, as it is for the rest of our range. Sizes can be mixed within one colourway to reach the minimum, while a

Accepted Answer

What is your MOQ for custom hoodiesThe minimum is counted per style and per colour rather than per size, so the colour count is what decides the size of the commitment.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.We would rather raise a risk before sampling than discover it during bulk production.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Bulk production starts once the sample is approved in writing, not while the specification is still moving.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 13

We value repeat business and price each order according to its quantity, style and materials, so a reorder is quoted on its own merits. Any conside

Accepted Answer

Do you offer discounts for repeat Custom Shorts buyersThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Production checks happen at cutting, at sewing, at finishing and before packing.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Lead time is relatively short because shorts use less fabric, but the finish and decoration steps still run in sequence.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.Repeat-order pricing and volume terms are quoted per order and confirmed in the contract rather than published as a standing discount.

Question 14

Heavier fleece constructions can be produced where the fabric is available for your colour and weight target. Very heavy fleece changes how the hoodie

Accepted Answer

Can you produce heavy 400 GSM+ hoodiesThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..Production checks happen at cutting, at sewing, at finishing and before packing.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Garment dye and vintage washes are widely used, and each added wash step means another development round and another shade-matching check across the batch.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 15

We plan delivery dates carefully and keep you informed, but we do not promise a fixed date in advance, because timing depends on factors such as ma

Accepted Answer

Can you confirm on-time delivery for Custom ShortsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.A purchase order is matched to the approved sample, which is the reference both sides measure against.Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.Dates and outcomes are confirmed in writing rather than promised in advance, and where something cannot be confirmed we say so before an order is placed.

Question 16

Both brushed-back fleece and French terry are commonly used for hoodies and sweatshirts, and the choice affects how the garment feels inside as much a

Accepted Answer

Do you offer brushed-back fleece and French terry hoodiesThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery on heavy fleece needs correct backing to avoid puckering, while puff and cracked print need testing against the fabric surface. Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length..Special techniques are tested on the actual material, because they behave differently across fabrics.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.A purchase order is matched to the approved sample, which is the reference both sides measure against.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 17

The standard export packing is folded garments in polybags, packed into cartons with an order reference and a packing list. Sizes and colours are e

Accepted Answer

What is the standard packaging for exported Custom ShortsPackaging is specified with the style rather than decided at the end, so the goods arrive ready for your own labelling.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Freight is quoted as its own line so the transit cost is visible before the goods are finished.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 18

Premium hoodies are usually chosen somewhere in the range of roughly 320 to 450 gsm, with the heavier end used when structure, warmth and a substantia

Accepted Answer

Fleece weight for premium hoodiesPremium hoodies are usually chosen somewhere in the range of roughly 320 to 450 gsm, with the heavier end used when structure, warmth and a substantial feel matter most. The right figure depends on the handfeel you want and the market you sell into, so we agree a target and then compare the fabric options available.Two fleece fabrics at the same weight can feel quite different depending on the yarn, the knit and the finishing, so weight alone does not describe the result. A denser, tighter fleece often reads as more premium than a heavier but looser one.Heavier fleece generally costs more, so a very heavy hoodie suits a flagship piece rather than every style in a range. A core weight with one or two heavier pieces is a common way to balance cost and impact.Where embroidery or appliqué is used, the fleece surface affects how the decoration sits, so fabric and decoration are considered together when the sample is developed.Tell us the feel and price point you are aiming for and we will confirm the fabric options for your order.It helps to think of the minimum as a per-colourway figure. One style in one colour is one minimum; the same style in three colours is three. Mixed sizes inside a colourway are normal and expected, which is why a size curve can be built around the figure rather than the other way round.Once the sample is approved, bulk production runs three to four weeks, after which the goods are packed and shipped by sea, air or land depending on urgency and volume. Working backwards from a launch date is the reliable way to confirm whether a schedule holds, because it exposes the freight and clearance time that a production-only plan tends to hide.

Question 19

After we review your enquiry we issue a written quotation covering the item, the quantity, the unit price and the terms, so you have a document to

Accepted Answer

Do you provide a written quotation and spec sheet for Custom ShortsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 20

Custom drawstrings, cords, cord tips and side taping can be added, and they are agreed with the specification so the same trims are used throughout th

Accepted Answer

Can you add custom drawstrings and side taping to shortsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Production checks happen at cutting, at sewing, at finishing and before packing.The approved sample is kept as the working reference so a repeat order behaves like the first one.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Inspection covers inseam measurement, pocket placement and waistband elastic recovery.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 21

Our standard MOQ is 100 pieces per style, per color. The minimum applies to each individual style you order, rather than being a total across a who

Accepted Answer

What is your MOQ for custom shortsThe minimum is counted per style and per colour rather than per size, so the colour count is what decides the size of the commitment.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..A purchase order is matched to the approved sample, which is the reference both sides measure against.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.We would rather raise a risk before sampling than discover it during bulk production.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 22

We keep your patterns and specifications so that reorders match the original. How long they are retained is best agreed in writing for your account

Accepted Answer

How long do you keep my hoodies & sweatshirts patterns for future reordersA repeat order is only as consistent as the specification that was written down before the first run.Embroidery on heavy fleece needs correct backing to avoid puckering, while puff and cracked print need testing against the fabric surface. Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length..Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 23

Mesh shorts for streetwear and sport can be produced, and the look usually depends on the mesh type, the lining and the side detailing as much as on t

Accepted Answer

Do you offer custom mesh shorts for streetwear and sportsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Bulk production starts once the sample is approved in writing, not while the specification is still moving.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Decoration placement and technique are settled on the physical sample instead of on a screen.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Inspection covers inseam measurement, pocket placement and waistband elastic recovery.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 24

A reorder is normally simpler than a first order because the pattern, specification and approvals already exist. It still needs a fresh order confi

Accepted Answer

What is your reorder process and lead time for hoodies & sweatshirtsThe schedule depends on the number of processes in a style, which is why two items in the same category can finish weeks apart.Embroidery on heavy fleece needs correct backing to avoid puckering, while puff and cracked print need testing against the fabric surface. Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length..The approved sample is kept as the working reference so a repeat order behaves like the first one.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Special techniques are tested on the actual material, because they behave differently across fabrics.Lead time rises with wash steps and with any multi-placement decoration, because each placement is set up separately.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 25

Mesh, nylon-style and fleece shorts can be produced, and each material gives a different character: mesh reads light and sporty, nylon-style fabric gi

Accepted Answer

Can you produce mesh, nylon, and fleece shortsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..A written brief shortens the first round, since the specification can be confirmed before sampling begins.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Decoration placement and technique are settled on the physical sample instead of on a screen.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 26

A competitive mix usually has a clear core, a few seasonal pieces, and accessories that lift average order value at low risk. We can help by mappin

Accepted Answer

Can you help me build a competitive product mix around hoodies & sweatshirtsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery on heavy fleece needs correct backing to avoid puckering, while puff and cracked print need testing against the fabric surface. Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length..Freight is quoted as its own line so the transit cost is visible before the goods are finished.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 27

Shorts can be produced in a range of fabrics, including cotton twill, fleece, mesh and nylon-style materials, and the fabric is usually decided togeth

Accepted Answer

What fabrics and lengths do you offer for custom shortsMaterial availability limits colour options, so sourcing is checked against your specification rather than assumed.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 28

Across US and EU streetwear, the categories that recur are heavyweight tees, hoodies and sweatshirts, relaxed-fit bottoms, overshirts and simple ac

Accepted Answer

Which hoodies & sweatshirts styles sell best for streetwear brands in the US andThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..Special techniques are tested on the actual material, because they behave differently across fabrics.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Decoration placement and technique are settled on the physical sample instead of on a screen.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.A purchase order is matched to the approved sample, which is the reference both sides measure against.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 29

A reorder can be placed in a different colourway. Because MOQ applies per style and per colour, a new colour is treated as its own order quantity,

Accepted Answer

Can I reorder shorts in a different colorway laterA repeat order is only as consistent as the specification that was written down before the first run.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.A purchase order is matched to the approved sample, which is the reference both sides measure against.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.We would rather raise a risk before sampling than discover it during bulk production.Lead time is relatively short because shorts use less fabric, but the finish and decoration steps still run in sequence.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 30

We can share what we see being produced across our client base and the construction details that recur, such as heavier cottons, relaxed and boxy f

Accepted Answer

What streetwear trends should I stock in hoodies & sweatshirts for next seasonThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

FAQs

Are you looking for a reliable manufacturer?

Products

Customization

Business Model

Capability

About Us