Question 1

If you find an issue after delivery, contact our team with photos and details within the period agreed in your order. We compare the reported items

Accepted Answer

How do you handle defective shorts units after deliveryThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 2

Yes. You are welcome to arrange a third-party inspection before shipment. Third-party checks are common on larger orders, and we cooperate with the

Accepted Answer

Can I send a third-party inspector to check shorts productionThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.The approved sample is kept as the working reference so a repeat order behaves like the first one.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Special techniques are tested on the actual material, because they behave differently across fabrics.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Lead time is relatively short because shorts use less fabric, but the finish and decoration steps still run in sequence.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 3

Rush orders are handled case by case and depend on the production schedule at the time. Contact us as early as possible with your target date, and

Accepted Answer

Can you handle rush orders for hoodies & sweatshirtsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.Capacity and the feasibility of a rush request depend on the current production schedule, so they are confirmed per order rather than quoted as a standing figure.

Question 4

Monthly output depends on the mix of styles in production, the fabrics involved and the season, so we confirm capacity for your specific order wind

Accepted Answer

How many units of hoodies & sweatshirts can you produce per monthThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Production checks happen at cutting, at sewing, at finishing and before packing.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 5

We apply in-line checks during production and a final inspection against the approved sample before packing. Whether a formal sampling standard, su

Accepted Answer

Do you inspect every unit of shorts or use AQL samplingThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Production checks happen at cutting, at sewing, at finishing and before packing.Lead time is relatively short because shorts use less fabric, but the finish and decoration steps still run in sequence.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 6

Bulk production generally takes about three to four weeks after sample approval, depending on order quantity, fabric availability and the level of

Accepted Answer

What is your production lead time for hoodies & sweatshirtsThe schedule depends on the number of processes in a style, which is why two items in the same category can finish weeks apart.Embroidery on heavy fleece needs correct backing to avoid puckering, while puff and cracked print need testing against the fabric surface. Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length..Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 7

Quality control runs through the order rather than being a single check at the end. Materials and trims are inspected when they arrive, garments ar

Accepted Answer

What quality control steps do you apply to shortsQuality is built into specific stages rather than inspected in at the end, so the checkpoints matter more than a general promise.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 8

Fit tolerance is agreed with you rather than applied as a fixed rule, because acceptable variation depends on the garment and the market. For most

Accepted Answer

What is your fit tolerance for hoodies & sweatshirtsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery on heavy fleece needs correct backing to avoid puckering, while puff and cracked print need testing against the fabric surface. Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length..Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 9

We produce in our own factory in Dongguan, China, where cutting, sewing, finishing and quality control are coordinated by our team. Specialised pro

Accepted Answer

Do you produce shorts in-house or through subcontractorsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.A purchase order is matched to the approved sample, which is the reference both sides measure against.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 10

Yes. Send your size chart and we will work to it, provided the increments are consistent and the measurements suit the fit you want. We review the

Accepted Answer

Can I send my own size chart for hoodies & sweatshirts productionFit is settled on the physical garment rather than on a chart, because tolerance is where size runs usually drift.Embroidery on heavy fleece needs correct backing to avoid puckering, while puff and cracked print need testing against the fabric surface. Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length..A purchase order is matched to the approved sample, which is the reference both sides measure against.We would rather raise a risk before sampling than discover it during bulk production.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.The approved sample is kept as the working reference so a repeat order behaves like the first one.Lead time rises with wash steps and with any multi-placement decoration, because each placement is set up separately.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 11

Capacity during peak periods is planned per order. Peak weeks in apparel production typically follow the retail calendar, and they fill earlier tha

Accepted Answer

What is your capacity during peak season for shortsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..We would rather raise a risk before sampling than discover it during bulk production.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.The approved sample is kept as the working reference so a repeat order behaves like the first one.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Washing matters most on denim shorts and on terry, where softness and surface effect change the hand feel.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.Capacity and the feasibility of a rush request depend on the current production schedule, so they are confirmed per order rather than quoted as a standing figure.

Question 12

Fit approval is handled through sampling. We produce a sample in the agreed size, usually a middle size for the range, and you evaluate the fit aga

Accepted Answer

How do you handle fit approval for hoodies & sweatshirtsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery on heavy fleece needs correct backing to avoid puckering, while puff and cracked print need testing against the fabric surface. Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length..The approved sample is kept as the working reference so a repeat order behaves like the first one.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Special techniques are tested on the actual material, because they behave differently across fabrics.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 13

Rush orders are handled case by case and depend on the production schedule at the time. Contact us as early as possible with your target date, and

Accepted Answer

Can you handle rush orders for shortsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Production checks happen at cutting, at sewing, at finishing and before packing.The approved sample is kept as the working reference so a repeat order behaves like the first one.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Inspection covers inseam measurement, pocket placement and waistband elastic recovery.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.Capacity and the feasibility of a rush request depend on the current production schedule, so they are confirmed per order rather than quoted as a standing figure.

Question 14

Yes. Extended sizes, including plus-size ranges, can be produced when the pattern is graded appropriately. The key point is that larger sizes are n

Accepted Answer

Can you produce plus-size or extended sizes for hoodies & sweatshirtsFit is settled on the physical garment rather than on a chart, because tolerance is where size runs usually drift.Embroidery on heavy fleece needs correct backing to avoid puckering, while puff and cracked print need testing against the fabric surface. Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length..Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Special techniques are tested on the actual material, because they behave differently across fabrics.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Lead time rises with wash steps and with any multi-placement decoration, because each placement is set up separately.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 15

Monthly output depends on the mix of styles in production, the fabrics involved and the season, so we confirm capacity for your specific order wind

Accepted Answer

How many units of shorts can you produce per monthThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Special techniques are tested on the actual material, because they behave differently across fabrics.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.A purchase order is matched to the approved sample, which is the reference both sides measure against.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 16

Yes. We work with custom size charts and grading rules supplied by the brand, and we can also develop sizing from a reference garment. Grading is c

Accepted Answer

Do you offer custom sizing and grading for hoodies & sweatshirtsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery on heavy fleece needs correct backing to avoid puckering, while puff and cracked print need testing against the fabric surface. Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length..Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Production checks happen at cutting, at sewing, at finishing and before packing.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 17

Bulk production generally takes about three to four weeks after sample approval, depending on order quantity, fabric availability and the level of

Accepted Answer

What is your production lead time for shortsLead time is set by what the style requires rather than by the category name, so the honest answer names the steps that actually consume the weeks.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Size approval happens on the sample, and the approved size set stays with the order for future repeats.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Production checks happen at cutting, at sewing, at finishing and before packing.Inspection covers inseam measurement, pocket placement and waistband elastic recovery.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 18

Our standard size range follows the charts most commonly used in the US and EU markets, and sizes can be adjusted to your own specification. A typi

Accepted Answer

What size range do you offer for hoodies & sweatshirtsFit is settled on the physical garment rather than on a chart, because tolerance is where size runs usually drift.Embroidery on heavy fleece needs correct backing to avoid puckering, while puff and cracked print need testing against the fabric surface. Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length..The approved sample is kept as the working reference so a repeat order behaves like the first one.Special techniques are tested on the actual material, because they behave differently across fabrics.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.A purchase order is matched to the approved sample, which is the reference both sides measure against.Lead time rises with wash steps and with any multi-placement decoration, because each placement is set up separately.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 19

Fit tolerance is agreed with you rather than applied as a fixed rule, because acceptable variation depends on the garment and the market. For most

Accepted Answer

What is your fit tolerance for shortsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Production checks happen at cutting, at sewing, at finishing and before packing.The approved sample is kept as the working reference so a repeat order behaves like the first one.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Lead time is relatively short because shorts use less fabric, but the finish and decoration steps still run in sequence.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 20

Yes. We can develop a complete collection rather than a single style, covering tops, bottoms, outerwear and accessories as needed. Collection devel

Accepted Answer

Can you develop a full hoodies & sweatshirts collection rather than a single styThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Production checks happen at cutting, at sewing, at finishing and before packing.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 21

Yes. Send your size chart and we will work to it, provided the increments are consistent and the measurements suit the fit you want. We review the

Accepted Answer

Can I send my own size chart for shorts productionFit is settled on the physical garment rather than on a chart, because tolerance is where size runs usually drift.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Freight is quoted as its own line so the transit cost is visible before the goods are finished.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 22

We treat client designs, fabrics and supplier information as confidential. An NDA can be signed before we review your designs or samples, and inter

Accepted Answer

How do you handle intellectual property and confidentiality for hoodies & sweatsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..Bulk production starts once the sample is approved in writing, not while the specification is still moving.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 23

Fit approval is handled through sampling. We produce a sample in the agreed size, usually a middle size for the range, and you evaluate the fit aga

Accepted Answer

How do you handle fit approval for shortsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.The approved sample is kept as the working reference so a repeat order behaves like the first one.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Special techniques are tested on the actual material, because they behave differently across fabrics.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Lead time is relatively short because shorts use less fabric, but the finish and decoration steps still run in sequence.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 24

For artwork, vector files such as AI, EPS or PDF are preferred because they scale cleanly for printing and embroidery. High-resolution PNG or PSD f

Accepted Answer

What file formats do you accept for hoodies & sweatshirts artworkThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Production checks happen at cutting, at sewing, at finishing and before packing.The approved sample is kept as the working reference so a repeat order behaves like the first one.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Garment dye and vintage washes are widely used, and each added wash step means another development round and another shade-matching check across the batch.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 25

Yes. Extended sizes, including plus-size ranges, can be produced when the pattern is graded appropriately. The key point is that larger sizes are n

Accepted Answer

Can you produce plus-size or extended sizes for shortsFit is settled on the physical garment rather than on a chart, because tolerance is where size runs usually drift.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Size approval happens on the sample, and the approved size set stays with the order for future repeats.A purchase order is matched to the approved sample, which is the reference both sides measure against.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 26

Yes. We can turn sketches or reference images into production-ready specifications covering measurements and grading, fabric and trim selection, se

Accepted Answer

Can you convert my sketches into a production-ready tech pack for hoodies & sweaThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Production checks happen at cutting, at sewing, at finishing and before packing.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 27

Yes. We work with custom size charts and grading rules supplied by the brand, and we can also develop sizing from a reference garment. Grading is c

Accepted Answer

Do you offer custom sizing and grading for shortsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Bulk production starts once the sample is approved in writing, not while the specification is still moving.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Lead time is relatively short because shorts use less fabric, but the finish and decoration steps still run in sequence.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 28

Yes. Our development team supports ODM projects by proposing fabrics, fits, construction details and decoration approaches based on your concept or

Accepted Answer

Do you have an in-house design team to help develop hoodies & sweatshirtsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 29

Our standard size range follows the charts most commonly used in the US and EU markets, and sizes can be adjusted to your own specification. A typi

Accepted Answer

What size range do you offer for shortsFit is settled on the physical garment rather than on a chart, because tolerance is where size runs usually drift.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Production checks happen at cutting, at sewing, at finishing and before packing.The approved sample is kept as the working reference so a repeat order behaves like the first one.Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 30

Either works. A complete tech pack speeds development, because measurements, materials and construction are defined from the start. If you only hav

Accepted Answer

What do you need from me to start a hoodies & sweatshirts sample — a tech pack oThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..A written brief shortens the first round, since the specification can be confirmed before sampling begins.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Freight is quoted as its own line so the transit cost is visible before the goods are finished.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

FAQs

Are you looking for a reliable manufacturer?

Products

Customization

Business Model

Capability

About Us