Question 1

Yes. We can develop a complete collection rather than a single style, covering tops, bottoms, outerwear and accessories as needed. Collection devel

Accepted Answer

Can you develop a full shorts collection rather than a single styleThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Decoration placement and technique are settled on the physical sample instead of on a screen.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.We would rather raise a risk before sampling than discover it during bulk production.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Inspection covers inseam measurement, pocket placement and waistband elastic recovery.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 2

Yes. We can ship a physical sample before you commit to bulk production. Sampling is quoted separately and confirmed in advance, and the courier co

Accepted Answer

Can you ship a physical sample of hoodies & sweatshirts before I commitFreight choice is a trade-off between your drop date and your landed cost, and it is set per order.Embroidery on heavy fleece needs correct backing to avoid puckering, while puff and cracked print need testing against the fabric surface. Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length..A purchase order is matched to the approved sample, which is the reference both sides measure against.We would rather raise a risk before sampling than discover it during bulk production.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.The approved sample is kept as the working reference so a repeat order behaves like the first one.Lead time rises with wash steps and with any multi-placement decoration, because each placement is set up separately.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 3

We treat client designs, fabrics and supplier information as confidential. An NDA can be signed before we review your designs or samples, and inter

Accepted Answer

How do you handle intellectual property and confidentiality for shorts designsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Bulk production starts once the sample is approved in writing, not while the specification is still moving.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Special techniques are tested on the actual material, because they behave differently across fabrics.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 4

Yes. After you approve the development sample, we produce a pre-production sample using the bulk fabric, trims and labels. This step confirms that

Accepted Answer

Do you provide a pre-production sample before mass production of hoodies & sweatThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery on heavy fleece needs correct backing to avoid puckering, while puff and cracked print need testing against the fabric surface. Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.We would rather raise a risk before sampling than discover it during bulk production.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Bulk production starts once the sample is approved in writing, not while the specification is still moving.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 5

For artwork, vector files such as AI, EPS or PDF are preferred because they scale cleanly for printing and embroidery. High-resolution PNG or PSD f

Accepted Answer

What file formats do you accept for shorts artworkThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Inspection covers inseam measurement, pocket placement and waistband elastic recovery.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 6

The number of included revision rounds depends on the style and on how many changes are requested, so it is confirmed in the sampling quotation rat

Accepted Answer

How many sample revisions are included for hoodies & sweatshirtsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery on heavy fleece needs correct backing to avoid puckering, while puff and cracked print need testing against the fabric surface. Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length..Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.We would rather raise a risk before sampling than discover it during bulk production.Production checks happen at cutting, at sewing, at finishing and before packing.Special techniques are tested on the actual material, because they behave differently across fabrics.Lead time rises with wash steps and with any multi-placement decoration, because each placement is set up separately.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 7

Yes. We can turn sketches or reference images into production-ready specifications covering measurements and grading, fabric and trim selection, se

Accepted Answer

Can you convert my sketches into a production-ready tech pack for shortsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Production checks happen at cutting, at sewing, at finishing and before packing.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Washing matters most on denim shorts and on terry, where softness and surface effect change the hand feel.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 8

Yes. Our development team supports ODM projects by proposing fabrics, fits, construction details and decoration approaches based on your concept or

Accepted Answer

Do you have an in-house design team to help develop shortsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.A purchase order is matched to the approved sample, which is the reference both sides measure against.We would rather raise a risk before sampling than discover it during bulk production.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Inspection covers inseam measurement, pocket placement and waistband elastic recovery.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 9

Sample development typically takes about one to two weeks once the design and materials are confirmed. The main variables are the complexity of the

Accepted Answer

How long does it take to produce a hoodies & sweatshirts sampleThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery on heavy fleece needs correct backing to avoid puckering, while puff and cracked print need testing against the fabric surface. Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length..Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Production checks happen at cutting, at sewing, at finishing and before packing.The approved sample is kept as the working reference so a repeat order behaves like the first one.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Lead time rises with wash steps and with any multi-placement decoration, because each placement is set up separately.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 10

Either works. A complete tech pack speeds development, because measurements, materials and construction are defined from the start. If you only hav

Accepted Answer

What do you need from me to start a shorts sample — a tech pack or a reference iThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.A purchase order is matched to the approved sample, which is the reference both sides measure against.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.The approved sample is kept as the working reference so a repeat order behaves like the first one.Special techniques are tested on the actual material, because they behave differently across fabrics.Washing matters most on denim shorts and on terry, where softness and surface effect change the hand feel.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 11

The sampling process starts with your design, tech pack or reference. We review the style and advise on fabrics and construction, then issue a quot

Accepted Answer

How does the sampling process work for hoodies & sweatshirtsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery on heavy fleece needs correct backing to avoid puckering, while puff and cracked print need testing against the fabric surface. Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length..The approved sample is kept as the working reference so a repeat order behaves like the first one.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Decoration placement and technique are settled on the physical sample instead of on a screen.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 12

Yes. We can ship a physical sample before you commit to bulk production. Sampling is quoted separately and confirmed in advance, and the courier co

Accepted Answer

Can you ship a physical sample of shorts before I commitShipping is quoted as its own line so you can weigh the transit time against the budget rather than discover it at the end.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Size approval happens on the sample, and the approved size set stays with the order for future repeats.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 13

Yes. We can add woven patches, rubber or silicone badges, embroidered patches and chenille letters. These are common in streetwear because they add

Accepted Answer

Can I add custom woven patches or rubber badges to hoodies & sweatshirtsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..A purchase order is matched to the approved sample, which is the reference both sides measure against.We would rather raise a risk before sampling than discover it during bulk production.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.The approved sample is kept as the working reference so a repeat order behaves like the first one.Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 14

Yes. After you approve the development sample, we produce a pre-production sample using the bulk fabric, trims and labels. This step confirms that

Accepted Answer

Do you provide a pre-production sample before mass production of shortsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..We would rather raise a risk before sampling than discover it during bulk production.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Bulk production starts once the sample is approved in writing, not while the specification is still moving.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Decoration placement and technique are settled on the physical sample instead of on a screen.Lead time is relatively short because shorts use less fabric, but the finish and decoration steps still run in sequence.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 15

Yes. We produce custom zippers and pulls, buttons, snaps, eyelets and drawcords, subject to availability, and we confirm the details in the quotati

Accepted Answer

Do you offer custom hardware such as zippers, buttons, and drawcords for hoodiesThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..Special techniques are tested on the actual material, because they behave differently across fabrics.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Decoration placement and technique are settled on the physical sample instead of on a screen.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.A purchase order is matched to the approved sample, which is the reference both sides measure against.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 16

The number of included revision rounds depends on the style and on how many changes are requested, so it is confirmed in the sampling quotation rat

Accepted Answer

How many sample revisions are included for shortsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.A purchase order is matched to the approved sample, which is the reference both sides measure against.We would rather raise a risk before sampling than discover it during bulk production.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 17

Yes. Send us the sample itself, or detailed photographs with measurements and construction notes, and we will develop a counter-sample for your app

Accepted Answer

Can you replicate my existing hoodies & sweatshirts sample exactlyThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..A purchase order is matched to the approved sample, which is the reference both sides measure against.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Special techniques are tested on the actual material, because they behave differently across fabrics.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 18

Sampling is quoted separately, and the fee is confirmed before development starts. The cost depends on the style, the materials and the work involv

Accepted Answer

Is the sample fee refundable when I place a bulk order for shortsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Production checks happen at cutting, at sewing, at finishing and before packing.Freight is quoted as its own line so the transit cost is visible before the goods are finished.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Lead time is relatively short because shorts use less fabric, but the finish and decoration steps still run in sequence.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.Warranty, returns and replacement are commercial terms rather than production details, so they are set out in the contract and confirmed with your order instead of being stated as a general promise.

Question 19

The number of colours you can use depends on the decoration method. Screen printing uses a separate screen for each colour, so it suits designs wit

Accepted Answer

How many colors can I use in a single design for hoodies & sweatshirtsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 20

Sample development typically takes about one to two weeks once the design and materials are confirmed. The main variables are the complexity of the

Accepted Answer

How long does it take to produce a shorts sampleThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.A purchase order is matched to the approved sample, which is the reference both sides measure against.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.We would rather raise a risk before sampling than discover it during bulk production.Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 21

Yes. We produce garment dye, enzyme wash, stone wash, acid wash, distressing and sun-faded finishes, which are central to vintage and streetwear lo

Accepted Answer

Can you produce washed, vintage, or distressed finishes on hoodies & sweatshirtsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 22

The sampling process starts with your design, tech pack or reference. We review the style and advise on fabrics and construction, then issue a quot

Accepted Answer

How does the sampling process work for shortsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Bulk production starts once the sample is approved in writing, not while the specification is still moving.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Special techniques are tested on the actual material, because they behave differently across fabrics.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Lead time is relatively short because shorts use less fabric, but the finish and decoration steps still run in sequence.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 23

Yes. We provide flat embroidery, three-dimensional puff embroidery and embroidered patches, and we frequently combine embroidery with printing on t

Accepted Answer

Do you provide embroidery as well as printing for hoodies & sweatshirtsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..Special techniques are tested on the actual material, because they behave differently across fabrics.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.A purchase order is matched to the approved sample, which is the reference both sides measure against.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 24

Yes. We can add woven patches, rubber or silicone badges, embroidered patches and chenille letters. These are common in streetwear because they add

Accepted Answer

Can I add custom woven patches or rubber badges to shortsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Print, embroidery and taping are all common, with side taping needing to be aligned before the leg seams are closed. Inspection covers inseam measurement, pocket placement and waistband elastic recovery..Size approval happens on the sample, and the approved size set stays with the order for future repeats.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Production checks happen at cutting, at sewing, at finishing and before packing.Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 25

We offer screen printing, direct-to-garment (DTG), DTF and puff printing. Screen printing delivers strong, durable results at volume and suits bold

Accepted Answer

What printing methods do you offer for hoodies & sweatshirtsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Loopback, brushed fleece and French terry are the standard bodies, and the weight decides whether the piece drapes softly or holds a boxy silhouette. Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one..Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.A purchase order is matched to the approved sample, which is the reference both sides measure against.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 26

Yes. We produce custom zippers and pulls, buttons, snaps, eyelets and drawcords, subject to availability, and we confirm the details in the quotati

Accepted Answer

Do you offer custom hardware such as zippers, buttons, and drawcords for shortsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..A purchase order is matched to the approved sample, which is the reference both sides measure against.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Bulk production starts once the sample is approved in writing, not while the specification is still moving.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 27

Yes. Send us the sample itself, or detailed photographs with measurements and construction notes, and we will develop a counter-sample for your app

Accepted Answer

Can you replicate my existing shorts sample exactlyThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.The approved sample is kept as the working reference so a repeat order behaves like the first one.Freight is quoted as its own line so the transit cost is visible before the goods are finished.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 28

Colour consistency is controlled through three steps. First, lab dips: dye samples are prepared and approved for each colour before bulk fabric is

Accepted Answer

How do you ensure color consistency across a hoodies & sweatshirts bulk orderThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery on heavy fleece needs correct backing to avoid puckering, while puff and cracked print need testing against the fabric surface. Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length..Decoration placement and technique are settled on the physical sample instead of on a screen.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.A purchase order is matched to the approved sample, which is the reference both sides measure against.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Hood shape, drawcord, ribbing tension and the zip on full-zip styles are the details that separate a premium hoodie from a basic one.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 29

The number of colours you can use depends on the decoration method. Screen printing uses a separate screen for each colour, so it suits designs wit

Accepted Answer

How many colors can I use in a single design for shortsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Twill, denim, French terry and mesh all suit shorts, and the fabric choice decides whether the piece reads as utility, casual or sportswear. Inseam length and leg width define the customer more than any other decision, followed by pocket construction and drawcord quality..If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Production checks happen at cutting, at sewing, at finishing and before packing.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Inspection covers inseam measurement, pocket placement and waistband elastic recovery.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 30

Yes. Heavyweight options across jersey, fleece, French terry, denim and canvas are part of our standard sourcing, which is why styles such as heavy

Accepted Answer

Do you carry heavy-weight fabrics suitable for premium hoodies & sweatshirtsMaterial availability limits colour options, so sourcing is checked against your specification rather than assumed.Embroidery on heavy fleece needs correct backing to avoid puckering, while puff and cracked print need testing against the fabric surface. Checks centre on hood symmetry, zip function, ribbing recovery and measurement tolerance at cuff and body length..Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.We would rather raise a risk before sampling than discover it during bulk production.Lead time rises with wash steps and with any multi-placement decoration, because each placement is set up separately.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

FAQs

Are you looking for a reliable manufacturer?

Products

Customization

Business Model

Capability

About Us