Question 1

Balance terms are agreed in the quotation before production. If you plan to inspect the goods before the final payment, tell us early so the payment s

Accepted Answer

Paying after inspectionBalance terms are agreed in the quotation before production. If you plan to inspect the goods before the final payment, tell us early so the payment schedule and the inspection timing are aligned in the order documents from the beginning rather than negotiated at the end.In practice this means agreeing three things in advance: when the inspection will take place, who arranges it, and which payment milestone follows the inspection result. That way there is no ambiguity about when payment falls due and no delay while terms are discussed.Where a third-party inspection is used, we cooperate fully with the inspector and coordinate timing so the check happens before packing and shipping.Mention your inspection plan when you request the quotation and we will structure the payment schedule around it.If you use a third-party inspection, agree the standard in advance, such as the checkpoints and the sampling level, and share it with both the inspector and our team. We coordinate timing so the inspection happens before packing, and inspection records are made available to you with the shipping documents.

Question 2

A deposit is commonly required to start production, with the balance due according to the agreed schedule. The exact percentage and payment stages are

Accepted Answer

Deposit requirementsA deposit is commonly required to start production, with the balance due according to the agreed schedule. The exact percentage and the milestone at which the balance falls due are confirmed in your quotation, because they can vary with order size, materials and specifications.The deposit covers the start of production: ordering fabric, scheduling cutting and sewing, and reserving capacity in the production plan. The balance is typically linked to completion or shipment. Where a client arranges inspection before shipment, the payment schedule can be aligned with the inspection date so both sides are protected.We recommend confirming the payment schedule together with pricing and lead time, so the full picture is clear before the order is placed. Any deviation from the agreed schedule is discussed in writing.Ask our team for the payment terms for your specific order and they will be set out clearly in the quotation.It also helps to know what the deposit covers: fabric orders, cutting and sewing scheduling and reserved capacity. If you need to align payment milestones with an inspection or with your own internal approval process, raise it during quotation so the schedule can be adjusted before production starts.

Question 3

Payment is made by bank transfer between companies. The full schedule is confirmed in the quotation and order documents, so both sides know the paymen

Accepted Answer

Payment termsPayment is made by bank transfer between companies. The full schedule is set out in the contract, so both sides know the payment stages before production begins. There are no verbal arrangements: everything relevant to payment is written down.Typical structures involve a deposit to start production and the balance at an agreed milestone, such as before shipment or after inspection. Because terms can vary with order size, specifications and the length of the relationship, the exact schedule is set out in the contract for each order.If your company works with specific internal requirements, such as approval by an inspection report or payment after a shipping document is issued, tell us at the quotation stage so the schedule can be aligned before work starts.Send us your project details and we will include the payment schedule in the quotation for your review.One practical suggestion: confirm the payment schedule at the same time as pricing and lead time, before the order is placed. When all three are documented together, production planning is straightforward and there is no last-minute negotiation.

Question 4

We aim to respond quickly. Send your design, quantities and target market, and we will confirm the quotation timeline in our reply. Where specificatio

Accepted Answer

Quotation turnaroundWe aim to respond quickly. Send your design, tech pack or reference together with quantities and your target market, and our team will confirm the quotation timeline in our reply. Where specifications are complete, quotations are usually prepared within a short window; more complex projects may need a little longer if fabrics must be sourced or construction details need clarification.To speed things up, include the essentials in your first message: garment type and style, target quantity per style and colour, fabric preference or reference garment, decoration requirements, labelling and packaging needs, destination country and target delivery date.If some details are not finalised, send what you have. We will indicate which decisions affect cost and lead time most, and often a short call or a few messages is enough to close the gaps before quoting.Contact our team with your project details and we will confirm when you can expect the quotation.If your specifications are incomplete, do not wait: send what you have and note the open points. Our team will tell you which decisions affect cost and timing, and usually a short exchange of messages is enough to confirm the rest before issuing the quotation.

Question 5

We normally quote in USD. Accepted Incoterms depend on your destination and preferred logistics; options are confirmed in the quotation so shipping re

Accepted Answer

Currencies and IncotermsWe normally quote in USD. Accepted Incoterms depend on your destination, your preferred logistics arrangement and the shipping method, so they are confirmed in the quotation rather than assumed. Common options include arrangements where we handle export and freight, and arrangements where your own forwarder collects from the factory.The practical difference matters for cost planning. When we arrange shipping, the quotation includes transport and export documentation; when you use your own forwarder, the quoted price covers the goods and factory-side preparation, and freight is arranged on your side. In both cases we confirm responsibilities in writing so there is no ambiguity.For larger orders, we can also compare shipping methods, for example sea versus air, and show the trade-off between transit time and cost, so you can choose the option that fits your launch schedule.Tell us your destination and preferred terms and we will confirm the quotation structure for your order.

Question 6

Yes. Different garment categories can be planned in one production schedule, with each style following its own minimum of 100 pieces per style, per co

Accepted Answer

Mixed-category ordersYes. We can plan orders that combine different garment categories in one production schedule, for example tees together with hoodies and bottoms. Each style follows its own minimum of 100 pieces per style, per color, and the quotation lists quantities and prices per style so the structure stays transparent.Mixed-category planning is often used by brands releasing a coordinated collection, because it keeps the range coherent and simplifies shipping: garments finished at similar times can be packed and shipped together, which reduces freight costs compared with several separate shipments.If some styles are ready earlier than others, we can also arrange partial shipments so the first styles reach you sooner rather than waiting for the whole order. The schedule is confirmed at quotation stage, based on your quantities and target dates.Send us the full list of styles you are planning and we will confirm how the order can be structured.Where styles share the same fabric and colour, producing them in the same cycle also improves consistency, because the fabric and dye lot are the same. If your collection includes several categories, tell us the full list early so cutting, sewing and finishing can be planned efficiently rather than style by style.

Question 7

Yes, sizes can be mixed within one colorway to reach the minimum. Different colors are treated as separate orders because the MOQ applies per style, p

Accepted Answer

Mixing sizes and colorsYes, sizes can be mixed within one colorway to reach the minimum. A single style and colour can be ordered as a spread of sizes, for example S, M, L and XL totalling 100 pieces, which is the usual approach for a first production run.Different colours are treated as separate orders, because our MOQ applies per style, per color, and each colour involves separate fabric or dye lots, cutting and setup. If your size curve is not finalised, send an estimate and we will confirm a workable split before production.A practical planning approach is to weight the first order towards the sizes that sell best in your market, then adjust on reorder based on actual sales data. For colour, many brands start with two or three core colours and add seasonal shades once the style is proven.Share your size and colour plan with our team and we will confirm the details in the quotation.For colour planning, it helps to think in terms of what you can sell rather than what you can order: a strong core colour, one seasonal shade and one accent is a common structure for a first run. Additional colours can be added on reorder once the style has proven itself.

Question 8

Sampling and optional services are quoted in advance, and the quotation itemizes production, decoration, labels and packaging. Special requests such a

Accepted Answer

Setup and tooling feesWe quote sampling and any optional services in advance, and the quotation itemizes the main cost elements: sample development, fabric and trims, cutting and sewing, decoration such as printing, embroidery or washing, labels and packaging, and shipping. There are no unexpected line items added later.Special requests are quoted separately because they involve real additional materials or processing time. Examples include custom hardware such as zippers and pulls, special wash stages, additional decoration placements, or bespoke packaging. Where an item involves tooling, we confirm the cost before production begins rather than after.If your budget is fixed, tell us the target and we will explain which specification choices bring the cost down without affecting the qualities your customers notice most, such as fabric weight, fit and finishing.Request a quotation for your design and we will list every element clearly before you commit.When comparing suppliers, ask each one for an itemized quotation rather than a single unit price. Side-by-side line items make it obvious whether a lower headline price excludes sampling, decoration or packaging, and that comparison is usually more valuable than the headline number alone.

Question 9

Samples are one-off development pieces and cost more per unit than bulk production. We quote the sampling fee separately and confirm it before develop

Accepted Answer

Sample versus bulk pricingSamples are one-off development pieces, so their unit cost is higher than bulk production. A sample involves pattern development, decoration or wash setup and a small run, while bulk pricing spreads those costs across the full order quantity. Comparing sample price with bulk price directly is therefore not meaningful.We quote the sampling fee separately and confirm it before development starts. The number of included revision rounds depends on the style and is confirmed in the sampling quotation, so expectations are clear on both sides. Once you approve the sample, we quote the bulk unit price for your order quantity.If your bulk order qualifies in size, the sample fee can be credited after the bulk order is placed, with the exact terms confirmed in your quotation. Many brands treat the sample fee as a development cost and focus on the bulk unit price and total landed cost when comparing suppliers.Send your design and planned quantity and we will quote sampling and bulk pricing separately and clearly.

Question 10

Unit pricing typically improves as quantity increases, because development and setup costs are spread across more pieces. Exact quantity breaks depend

Accepted Answer

Tiered pricing and quantity breaksYes. Unit pricing typically improves as quantity increases, and we can quote two or three quantity levels so you can compare the effect of volume on your specific design. The exact breaks depend on the style, the fabric and the decoration method, and are confirmed in the written quotation.A few practical points help you get the best price. Confirm specifications early, because design changes after sampling can add development cost. Group as many pieces as possible into one fabric and colour group, since every additional colour or fabric adds setup. Plan production outside peak periods, when scheduling is easier.Some specification choices affect price more than others: the number of print colours or placements, the level of washing or finishing, and the fabric weight. Our team will explain which adjustments have the biggest effect so you can decide where to invest and where to simplify.Tell us your target quantity and budget range and we will structure the quotation accordingly.

Question 11

The unit price depends on fabric and weight, construction and fit, decoration such as printing, embroidery or washing, labels and packaging, and order

Accepted Answer

How unit price is calculatedThe unit price of streetwear apparel depends on several elements: fabric and weight, construction and fit complexity, decoration such as printing, embroidery or washing, labels and packaging, and the total quantity you order. Each of these changes the cost structure, which is why we quote per project rather than from a fixed price list.Fixed costs, including pattern development, machine setup, screen or embroidery setup and packing preparation, are spread across the number of pieces produced. That is why larger volumes normally bring a lower unit price: the same fixed cost is divided by more units.To make comparison easy, we provide an itemized quotation showing the main cost elements, and we can quote two or three quantity levels so you can see how the price changes with volume. If your design is still evolving, we can also indicate which specification choices have the biggest effect on cost.Send your design and target quantities and we will prepare a clear, itemized quotation for your project.

Question 12

Yes. With an MOQ of 100 pieces per style, per color, you can place a trial order before scaling up. Many brands start with one or two core styles, app

Accepted Answer

Trial orders before bulk productionYes. With an MOQ of 100 pieces per style, per color, you can place a trial order before committing to a larger production run. This is the approach we usually recommend for a new collection: choose one or two core styles, approve the sample, and test how the fit, fabric and decoration perform with real customers before scaling up.Once a style sells, reorders follow the same minimum, so restocking stays predictable and the pattern and wash recipes are already established. That means reorders are typically faster and involve fewer decisions than the first order.A practical tip from our team: keep the first run focused, with fewer styles, colours and decoration placements. Fewer variables mean faster production, lower setup cost and a clearer read on what your market actually wants. You can extend the range in the next order once you know which styles perform.Tell us which styles you want to test and we will confirm the trial plan, sampling schedule and pricing.

Question 13

Our standard MOQ is 100 pieces per style, per color. Sizes can be mixed within one colorway to reach the minimum, while different colors are treated a

Accepted Answer

MOQ for streetwear apparelOur standard MOQ is 100 pieces per style, per color. The minimum applies to each individual style you order, rather than being a total across a whole collection, so a brand can start with one design and still meet the requirement.Sizes can be mixed within one colorway to reach the minimum. For example, a single style and colour can be ordered as a spread of sizes such as S, M, L and XL totalling 100 pieces. Different colours are treated as separate orders, because each colour involves separate fabric or dye lots, separate cutting and separate setup.This structure exists to make small runs practical. Many factories require several hundred pieces per style, which forces young brands to tie up capital in inventory before they know what sells. A 100-piece minimum lets you test a design, gather real customer feedback and scale only what performs.If you are planning several styles, we confirm the minimum for each one in the written quotation and can suggest quantities that keep the first order efficient.

Question 14

Our strength is turning a brand's design into a production-ready garment: practical fabric and construction advice, reliable sampling, controlled wash

Accepted Answer

Our main strengthOur main strength is turning a brand's design into a production-ready garment: practical fabric and construction advice, reliable sampling, controlled washing and decoration, and consistent quality checks before shipment. That combination is what allows a design to arrive looking as the brand intended rather than as an approximation.It starts with the review stage. Before sampling, we look at the design and flag anything that could affect cost, fit or durability, such as a heavy garment in a light fabric or a wash effect that may not reproduce consistently. Then we develop a sample, and the approved sample becomes the reference for bulk production and inspection.After approval, production is planned around the fabrics, decoration methods and finishing the style needs, with checks at each stage. Brands receive updates as the order progresses and inspection records before shipment.Send us your design or reference and we will show you how that process would apply to your collection.

Question 15

Yes. Our minimum of 100 pieces per style, per color keeps first orders accessible for startups, while our production planning supports larger seasonal

Accepted Answer

Order sizes we supportWe support both ends of the range. Our standard minimum is 100 pieces per style, per color, which is designed for emerging brands that need to test a design before committing to larger volumes. Sizes can be mixed within one colorway, so a first order can be planned around the size spread that actually sells in your market.At the other end, our production planning handles larger seasonal programmes, multi-style collections and repeat orders, including orders that combine several garment categories in one schedule. Each style follows its own minimum, and the quotation lists quantities and prices per style so the structure stays clear.For brands in transition, it is common to start with a small order, confirm what sells, and then scale the winning styles in the next production run, adding new colours or fabrics as demand grows.Tell us your planned quantities and target dates and we will confirm how the order can be structured.For planning purposes, most brands keep the first order narrow in styles and colours to test the market, then use the sales data to decide what to scale. Our team can help set a size curve and colour plan for the first run so the order fits the minimum and your budget at the same time.

Question 16

Yes. We provide end-to-end service: fabric sourcing, pattern development, sampling, bulk production, washing, printing, embroidery, quality control, p

Accepted Answer

End-to-end serviceYes. We provide end-to-end service covering fabric sourcing, pattern development, sampling, bulk production, washing, printing, embroidery, quality control, packing and shipping. Brands can join at any stage: some arrive with a complete tech pack and production-ready design, others start with a concept, a mood board or a reference garment.In practice, an end-to-end project moves through several stages. We review the design and advise on fabrics and construction, develop a sample for approval, and then run bulk production after the sample is signed off. During production, materials are inspected, garments are checked in line, and finished pieces are reviewed against the approved sample before packing. Finally we handle packing and shipping by sea, air or land depending on your schedule and budget.Working with one partner for the whole process reduces the coordination burden on your team and keeps specifications consistent between the sample and the bulk order.Send us your design and target launch date and we will map out the timeline with you.

Question 17

Three things stand out: in-house pattern and wash development, a standard MOQ of 100 pieces per style, per color which suits emerging brands, and one

Accepted Answer

What sets our factory apartThree things tend to stand out when brands compare us with other streetwear suppliers. The first is in-house development capability: pattern making and wash development are handled by our own team, so we can act on design changes quickly rather than depending on outside workshops for every revision.The second is flexibility on order size. Our standard MOQ is 100 pieces per style, per color, and sizes can be mixed within one colorway, which makes a first production run realistic for emerging brands. At the same time, we are structured to handle larger seasonal volumes and reorders as a brand grows.The third is communication. Each brand works with a dedicated contact who follows the project from development to shipment, keeps specifications documented and raises potential production issues before they become problems in bulk.To judge whether that fit works for you, send us a design or reference and compare our sampling and quotation process with other suppliers.

Question 18

Client references and case studies are shared with the client's permission. We can discuss relevant projects during a call and, where the brand agrees

Accepted Answer

References and case studiesClient references and case studies are shared with the client's permission, since most brands treat their suppliers and product development as confidential. During a conversation we can discuss comparable projects in general terms and, where the brand agrees, provide examples of work we have produced.If you are evaluating suppliers, there are useful alternatives to a formal case study. We can show the sample room, share production photos and videos, provide specification examples for similar garments, and agree to a third-party audit or factory visit. Many buyers also request a paid sample early in the process, which is the most reliable way to judge construction, fabrics and finishing.We also ask clients to keep our production information confidential in the same way, since designs, fabrics and suppliers are commercially sensitive for both sides.Tell us what would give you confidence in the evaluation, and we will arrange it where possible.When you are evaluating any supplier, including us, ask for the specific evidence that matters to your business: a paid sample of your own design, records from the sample inspection, and a clear explanation of the quality checkpoints used during production. Concrete evidence of process is usually more useful than a brand name in a portfolio.

Question 19

Yes. We work with streetwear and fashion brands in the United States and Europe, as well as other international markets, on OEM and ODM programmes cov

Accepted Answer

Working with US and EU brandsYes. We work with streetwear and fashion brands in the United States and Europe, as well as in other international markets, on OEM and ODM programmes that cover design development, sampling, bulk production, quality control and export shipping.Working with international brands brings specific requirements that our team handles as standard: consistent sizing against an approved grade, colour approval through lab dips and shade bands, labelling that matches the destination market, and packing prepared for long-distance shipping. We also support private label programmes, where the finished garment carries your brand rather than ours.Communication is managed so that time zones do not become a bottleneck. Most clients work with a single contact who follows the order from the first inquiry to shipping, shares progress updates and answers questions in writing.If you would like to discuss your market requirements, send us your design or reference and we will explain how we would approach the project.

Question 20

Monthly capacity depends on the styles in production and the season. We confirm the production window available for your order in the quotation, so yo

Accepted Answer

Production capacityMonthly output depends on the mix of styles in production, the fabrics involved and the season, so we confirm capacity for your specific order window rather than publishing a single general figure. Some products, such as basic tees and simple hoodies, run quickly, while heavily washed denim or complex jackets take longer per unit.When you send an inquiry, tell us the styles, approximate quantities and your target delivery date. Our team will check the production schedule and confirm what can be produced in that period, including whether the order should be split into partial shipments so you receive the first batch earlier.For brands planning a launch calendar, it helps to confirm specifications and approve samples early, and to place the bulk order as soon as the sample is approved. Orders placed ahead of peak production periods are easier to schedule and reduce the risk of delays.Contact us with your quantities and target dates and we will confirm the schedule for your project.

Question 21

Our factory is in Dongguan, Guangdong, China. Visits can be arranged in advance, subject to availability at the time, and our team can show you the sa

Accepted Answer

Factory location and visitsOur factory is located in Dongguan, Guangdong, China, in the Pearl River Delta garment manufacturing region. Production, sampling and quality control all take place at the same site, which makes it easier to keep specifications consistent and to respond quickly when changes are needed.Client visits can be arranged in advance, subject to availability at the time, and we are happy to host brands that want to see the workshop before committing to a production programme. During a visit, our team can walk you through the sample room, the production floor, the washing and finishing area and current orders, and answer technical questions directly.If travelling is not practical, we can arrange a video walkthrough or a scheduled call with photos and video from the workshop. Many clients manage the whole development process remotely: reviewing samples, approving fabrics and following production through updates and inspection records.Please contact our team with your preferred dates and we will confirm what can be arranged around the production schedule.

Question 22

Infullsail has more than 20 years of experience in garment production, with a focus on vintage and streetwear apparel. Sampling, pattern development,

Accepted Answer

Manufacturing experienceInfullsail has more than 20 years of experience in garment production, with a focus on vintage and streetwear apparel. The experience sits inside the company rather than in a sales office: pattern development, sampling, fabric sourcing, washing, printing, embroidery and quality control are coordinated by our own team in Dongguan, China.That history shapes how projects are handled. Styles that are difficult for less experienced suppliers, such as heavyweight oversized hoodies, washed denim, distressed finishes and detailed embroidery, are part of our normal production range. We can advise early on what a design needs in terms of fabric weight, seam structure, wash recipe and decoration method, which reduces the number of sample revisions and keeps the bulk order predictable.For growing brands, that experience is most useful in the planning stage. Before you commit, we review the design, discuss fabric options and give a realistic view of cost and lead time. If we see a detail that may cause problems in production, we say so before sampling rather than after bulk production begins.If you want to know how we would approach your specific collection, send us your design, reference images or tech pack and our team will prepare a review and a quotation.

Question 23

We are a direct manufacturer, not a middleman. Our production team, sample room and quality control are based in our own factory in Dongguan, China, s

Accepted Answer

What it means to work with a direct manufacturerInfullsail is a direct apparel manufacturer, not a trading company or middleman. Our production team, sample room, pattern makers and quality control staff are based in our own factory in Dongguan, China, so when you ask a technical or commercial question, the answer comes from the people who actually make the garments.This matters in three practical ways. First, pricing: a quotation comes directly from the factory rather than passing through a broker, so you can see the real cost structure behind each line. Second, speed and clarity: design questions, sample feedback and production changes are handled internally instead of being relayed through a third party. Third, accountability: the team that approves your sample is the same team responsible for the bulk order, which keeps specifications consistent from the first sample to final delivery.In practice, brands work with us either as OEM clients, sending a complete tech pack and expecting exact execution, or as ODM clients, who bring a concept or reference and rely on our development team for fabrics, fits and construction advice. Both routes run through the same internal process: design review, fabric confirmation, sampling, approval, bulk production, inspection and shipping.If you would like to verify us before placing an order, we can arrange a factory visit, a video walkthrough of the workshop, or cooperate with a third-party audit arranged by you. Ask our team directly and we will answer without intermediaries.

Streetwear Manufacturing FAQ

Are you looking for a reliable manufacturer?

Products

Customization

Business Model

Capability

About Us