Question 1

Fit approval is handled through sampling. We produce a sample in the agreed size, usually a middle size for the range, and you evaluate the fit aga

Accepted Answer

How do you handle fit approval for jeansThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 2

Yes. Extended sizes, including plus-size ranges, can be produced when the pattern is graded appropriately. The key point is that larger sizes are n

Accepted Answer

Can you produce plus-size or extended sizes for jeansMeasurements and tolerances are agreed on the sample before bulk cutting, which is what keeps a size run consistent.Denim weight and construction drive everything: a heavier rigid denim holds a structured leg, while a lightweight denim drapes and photographs differently. Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.A purchase order is matched to the approved sample, which is the reference both sides measure against.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.We would rather raise a risk before sampling than discover it during bulk production.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 3

Yes. We work with custom size charts and grading rules supplied by the brand, and we can also develop sizing from a reference garment. Grading is c

Accepted Answer

Do you offer custom sizing and grading for jeansThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.The approved sample is kept as the working reference so a repeat order behaves like the first one.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Decoration placement and technique are settled on the physical sample instead of on a screen.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 4

Our standard size range follows the charts most commonly used in the US and EU markets, and sizes can be adjusted to your own specification. A typi

Accepted Answer

What size range do you offer for jeansMeasurements and tolerances are agreed on the sample before bulk cutting, which is what keeps a size run consistent.Denim weight and construction drive everything: a heavier rigid denim holds a structured leg, while a lightweight denim drapes and photographs differently. Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels..Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.We would rather raise a risk before sampling than discover it during bulk production.Production checks happen at cutting, at sewing, at finishing and before packing.Special techniques are tested on the actual material, because they behave differently across fabrics.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 5

Yes. We can develop a complete collection rather than a single style, covering tops, bottoms, outerwear and accessories as needed. Collection devel

Accepted Answer

Can you develop a full jeans collection rather than a single styleThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.A purchase order is matched to the approved sample, which is the reference both sides measure against.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 6

We treat client designs, fabrics and supplier information as confidential. An NDA can be signed before we review your designs or samples, and inter

Accepted Answer

How do you handle intellectual property and confidentiality for jeans designsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim weight and construction drive everything: a heavier rigid denim holds a structured leg, while a lightweight denim drapes and photographs differently. Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Production checks happen at cutting, at sewing, at finishing and before packing.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Wash is the main cost and time variable: rinse, bleach, distress, tint and hand-sanding each add a development round and a risk of shade drift between runs.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 7

For artwork, vector files such as AI, EPS or PDF are preferred because they scale cleanly for printing and embroidery. High-resolution PNG or PSD f

Accepted Answer

What file formats do you accept for jeans artworkThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Decoration placement and technique are settled on the physical sample instead of on a screen.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 8

Yes. We can turn sketches or reference images into production-ready specifications covering measurements and grading, fabric and trim selection, se

Accepted Answer

Can you convert my sketches into a production-ready tech pack for jeansThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim weight and construction drive everything: a heavier rigid denim holds a structured leg, while a lightweight denim drapes and photographs differently. Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.A purchase order is matched to the approved sample, which is the reference both sides measure against.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.We would rather raise a risk before sampling than discover it during bulk production.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 9

Yes. Our development team supports ODM projects by proposing fabrics, fits, construction details and decoration approaches based on your concept or

Accepted Answer

Do you have an in-house design team to help develop jeansThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..Decoration placement and technique are settled on the physical sample instead of on a screen.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.We would rather raise a risk before sampling than discover it during bulk production.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Lead time is driven by the wash recipe: a multi-step finish takes longer to develop and longer to repeat consistently.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 10

Either works. A complete tech pack speeds development, because measurements, materials and construction are defined from the start. If you only hav

Accepted Answer

What do you need from me to start a jeans sample — a tech pack or a reference imThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.The approved sample is kept as the working reference so a repeat order behaves like the first one.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Decoration placement and technique are settled on the physical sample instead of on a screen.Lead time is driven by the wash recipe: a multi-step finish takes longer to develop and longer to repeat consistently.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 11

Yes. We can ship a physical sample before you commit to bulk production. Sampling is quoted separately and confirmed in advance, and the courier co

Accepted Answer

Can you ship a physical sample of jeans before I commitShipping is quoted as its own line so you can weigh the transit time against the budget rather than discover it at the end.Denim weight and construction drive everything: a heavier rigid denim holds a structured leg, while a lightweight denim drapes and photographs differently. Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels..Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 12

Yes. After you approve the development sample, we produce a pre-production sample using the bulk fabric, trims and labels. This step confirms that

Accepted Answer

Do you provide a pre-production sample before mass production of jeansThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..Size approval happens on the sample, and the approved size set stays with the order for future repeats.A purchase order is matched to the approved sample, which is the reference both sides measure against.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Bulk production starts once the sample is approved in writing, not while the specification is still moving.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 13

The number of included revision rounds depends on the style and on how many changes are requested, so it is confirmed in the sampling quotation rat

Accepted Answer

How many sample revisions are included for jeansThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim weight and construction drive everything: a heavier rigid denim holds a structured leg, while a lightweight denim drapes and photographs differently. Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels..Bulk production starts once the sample is approved in writing, not while the specification is still moving.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Decoration placement and technique are settled on the physical sample instead of on a screen.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.We would rather raise a risk before sampling than discover it during bulk production.Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 14

Sample development typically takes about one to two weeks once the design and materials are confirmed. The main variables are the complexity of the

Accepted Answer

How long does it take to produce a jeans sampleThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim weight and construction drive everything: a heavier rigid denim holds a structured leg, while a lightweight denim drapes and photographs differently. Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.The approved sample is kept as the working reference so a repeat order behaves like the first one.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Decoration placement and technique are settled on the physical sample instead of on a screen.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 15

The sampling process starts with your design, tech pack or reference. We review the style and advise on fabrics and construction, then issue a quot

Accepted Answer

How does the sampling process work for jeansThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Production checks happen at cutting, at sewing, at finishing and before packing.Freight is quoted as its own line so the transit cost is visible before the goods are finished.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 16

Yes. We can add woven patches, rubber or silicone badges, embroidered patches and chenille letters. These are common in streetwear because they add

Accepted Answer

Can I add custom woven patches or rubber badges to jeansThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim weight and construction drive everything: a heavier rigid denim holds a structured leg, while a lightweight denim drapes and photographs differently. Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels..Freight is quoted as its own line so the transit cost is visible before the goods are finished.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 17

Yes. We produce custom zippers and pulls, buttons, snaps, eyelets and drawcords, subject to availability, and we confirm the details in the quotati

Accepted Answer

Do you offer custom hardware such as zippers, buttons, and drawcords for jeansThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..A purchase order is matched to the approved sample, which is the reference both sides measure against.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.The approved sample is kept as the working reference so a repeat order behaves like the first one.Special techniques are tested on the actual material, because they behave differently across fabrics.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Lead time is driven by the wash recipe: a multi-step finish takes longer to develop and longer to repeat consistently.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 18

Yes. Send us the sample itself, or detailed photographs with measurements and construction notes, and we will develop a counter-sample for your app

Accepted Answer

Can you replicate my existing jeans sample exactlyThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim weight and construction drive everything: a heavier rigid denim holds a structured leg, while a lightweight denim drapes and photographs differently. Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels..We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Decoration placement and technique are settled on the physical sample instead of on a screen.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 19

The number of colours you can use depends on the decoration method. Screen printing uses a separate screen for each colour, so it suits designs wit

Accepted Answer

How many colors can I use in a single design for jeansThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Production checks happen at cutting, at sewing, at finishing and before packing.Freight is quoted as its own line so the transit cost is visible before the goods are finished.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 20

Yes. We produce garment dye, enzyme wash, stone wash, acid wash, distressing and sun-faded finishes, which are central to vintage and streetwear lo

Accepted Answer

Can you produce washed, vintage, or distressed finishes on jeansThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim weight and construction drive everything: a heavier rigid denim holds a structured leg, while a lightweight denim drapes and photographs differently. Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels..Special techniques are tested on the actual material, because they behave differently across fabrics.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.A purchase order is matched to the approved sample, which is the reference both sides measure against.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 21

Yes. We provide flat embroidery, three-dimensional puff embroidery and embroidered patches, and we frequently combine embroidery with printing on t

Accepted Answer

Do you provide embroidery as well as printing for jeansThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..Size approval happens on the sample, and the approved size set stays with the order for future repeats.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 22

We offer screen printing, direct-to-garment (DTG), DTF and puff printing. Screen printing delivers strong, durable results at volume and suits bold

Accepted Answer

What printing methods do you offer for jeansThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Size approval happens on the sample, and the approved size set stays with the order for future repeats.A purchase order is matched to the approved sample, which is the reference both sides measure against.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 23

Colour consistency is controlled through three steps. First, lab dips: dye samples are prepared and approved for each colour before bulk fabric is

Accepted Answer

How do you ensure color consistency across a jeans bulk orderThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..Size approval happens on the sample, and the approved size set stays with the order for future repeats.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Production checks happen at cutting, at sewing, at finishing and before packing.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 24

Yes. Heavyweight options across jersey, fleece, French terry, denim and canvas are part of our standard sourcing, which is why styles such as heavy

Accepted Answer

Do you carry heavy-weight fabrics suitable for premium jeansFabric is confirmed before sampling, because weight and weave change how the piece drapes and how the finish behaves.Denim weight and construction drive everything: a heavier rigid denim holds a structured leg, while a lightweight denim drapes and photographs differently. Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels..Sizing is agreed inside one colourway, so a size run can follow your real sales curve.The approved sample is kept as the working reference so a repeat order behaves like the first one.Special techniques are tested on the actual material, because they behave differently across fabrics.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 25

Yes. Send us a swatch and we will match it as closely as possible in composition, weight, colour and finish. If the exact fabric is not available,

Accepted Answer

Can you match a fabric swatch I send for my jeansMaterial availability limits colour options, so sourcing is checked against your specification rather than assumed.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..A purchase order is matched to the approved sample, which is the reference both sides measure against.We would rather raise a risk before sampling than discover it during bulk production.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.The approved sample is kept as the working reference so a repeat order behaves like the first one.Lead time is driven by the wash recipe: a multi-step finish takes longer to develop and longer to repeat consistently.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 26

Shrinkage is managed by choosing pre-shrunk or washed fabrics and by testing the result, rather than by quoting a single figure in advance. The act

Accepted Answer

What is the fabric shrinkage rate for your jeans after washingFabric is confirmed before sampling, because weight and weave change how the piece drapes and how the finish behaves.Denim weight and construction drive everything: a heavier rigid denim holds a structured leg, while a lightweight denim drapes and photographs differently. Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels..Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.We would rather raise a risk before sampling than discover it during bulk production.Production checks happen at cutting, at sewing, at finishing and before packing.Special techniques are tested on the actual material, because they behave differently across fabrics.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 27

We can source organic, recycled and lower-impact fabrics when they are available for your project, including organic cotton, recycled polyester ble

Accepted Answer

Do you offer organic, recycled, or sustainable fabrics for jeansMaterial availability limits colour options, so sourcing is checked against your specification rather than assumed.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 28

Yes. We can source or develop specific blends such as cotton-poly, French terry, brushed fleece, twill, canvas and denim, as well as technical blen

Accepted Answer

Can you source specific fabric blends for jeans, such as cotton-poly or French tFabric is confirmed before sampling, because weight and weave change how the piece drapes and how the finish behaves.Denim weight and construction drive everything: a heavier rigid denim holds a structured leg, while a lightweight denim drapes and photographs differently. Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels..Size approval happens on the sample, and the approved size set stays with the order for future repeats.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 29

For streetwear, brands usually choose heavier fabrics because they hold their shape, drape with more structure and carry prints and embroidery well

Accepted Answer

Which fabric weight (GSM) do you recommend for jeansMaterial availability limits colour options, so sourcing is checked against your specification rather than assumed.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Production checks happen at cutting, at sewing, at finishing and before packing.Freight is quoted as its own line so the transit cost is visible before the goods are finished.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Lead time is driven by the wash recipe: a multi-step finish takes longer to develop and longer to repeat consistently.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 30

We work with a wide range of fabrics for streetwear: cotton and cotton blends, heavyweight jersey, French terry, fleece, denim, twill, canvas, rips

Accepted Answer

What fabrics are available for jeansFabric is confirmed before sampling, because weight and weave change how the piece drapes and how the finish behaves.Denim weight and construction drive everything: a heavier rigid denim holds a structured leg, while a lightweight denim drapes and photographs differently. Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels..Freight is quoted as its own line so the transit cost is visible before the goods are finished.Special techniques are tested on the actual material, because they behave differently across fabrics.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

FAQs

Are you looking for a reliable manufacturer?

Products

Customization

Business Model

Capability

About Us