Question 1

Yes. We can plan orders that combine different garment categories in one production schedule, for example tees together with hoodies and bottoms. E

Accepted Answer

Do you support mixed-category orders with t-shirts and other itemsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Cotton jersey from 180gsm to 300gsm is the base, and heavier jersey is what holds a boxy, oversized silhouette after washing. Neck rib tension, shoulder taping and sleeve shape decide whether a tee keeps its form through a season, not the artwork..The approved sample is kept as the working reference so a repeat order behaves like the first one.Special techniques are tested on the actual material, because they behave differently across fabrics.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.A purchase order is matched to the approved sample, which is the reference both sides measure against.Inspection covers print registration, neck rib measurement and shade consistency across the batch.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 2

Yes, sizes can be mixed within one colorway to reach the minimum. A single style and colour can be ordered as a spread of sizes, for example S, M,

Accepted Answer

Can I mix sizes and colors within the MOQ for t-shirtsMinimums are about setup cost: fabric, cutting and finishing each carry a fixed step that does not shrink with volume.Screen print, DTG and puff or cracked print carry different setup costs and different durability, and print placement is best confirmed on the physical sample. Inspection covers print registration, neck rib measurement and shade consistency across the batch..A written brief shortens the first round, since the specification can be confirmed before sampling begins.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Decoration placement and technique are settled on the physical sample instead of on a screen.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 3

We quote sampling and any optional services in advance, and the quotation itemizes the main cost elements: sample development, fabric and trims, cu

Accepted Answer

Are there hidden tooling or setup fees for custom t-shirtsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Cotton jersey from 180gsm to 300gsm is the base, and heavier jersey is what holds a boxy, oversized silhouette after washing. Neck rib tension, shoulder taping and sleeve shape decide whether a tee keeps its form through a season, not the artwork..Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Special techniques are tested on the actual material, because they behave differently across fabrics.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Decoration placement and technique are settled on the physical sample instead of on a screen.Garment dye, acid wash and enzyme wash are all common and each adds a development round, since the same recipe behaves differently on different jersey weights.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 4

Samples are one-off development pieces, so their unit cost is higher than bulk production. A sample involves pattern development, decoration or was

Accepted Answer

What is the price difference between sample and bulk orders of t-shirtsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Screen print, DTG and puff or cracked print carry different setup costs and different durability, and print placement is best confirmed on the physical sample. Inspection covers print registration, neck rib measurement and shade consistency across the batch..Freight is quoted as its own line so the transit cost is visible before the goods are finished.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 5

Yes. Unit pricing typically improves as quantity increases, and we can quote two or three quantity levels so you can compare the effect of volume o

Accepted Answer

Do you offer tiered pricing for t-shirts based on quantity breaksThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Cotton jersey from 180gsm to 300gsm is the base, and heavier jersey is what holds a boxy, oversized silhouette after washing. Neck rib tension, shoulder taping and sleeve shape decide whether a tee keeps its form through a season, not the artwork..Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.A purchase order is matched to the approved sample, which is the reference both sides measure against.We would rather raise a risk before sampling than discover it during bulk production.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Inspection covers print registration, neck rib measurement and shade consistency across the batch.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 6

The unit price of t-shirts depends on several elements: fabric and weight, construction and fit complexity, decoration such as printing, embroidery

Accepted Answer

How unit price is calculatedThe unit price of t-shirts depends on several elements: fabric and weight, construction and fit complexity, decoration such as printing, embroidery or washing, labels and packaging, and the total quantity you order. Each of these changes the cost structure, which is why we quote per project rather than from a fixed price list.Fixed costs, including pattern development, machine setup, screen or embroidery setup and packing preparation, are spread across the number of pieces produced. That is why larger volumes normally bring a lower unit price: the same fixed cost is divided by more units.To make comparison easy, we provide an itemized quotation showing the main cost elements, and we can quote two or three quantity levels so you can see how the price changes with volume. If your design is still evolving, we can also indicate which specification choices have the biggest effect on cost.Send your design and target quantities and we will prepare a clear, itemized quotation for your project.The minimum is 100 pieces per style, per color, not per order. Sizes can be mixed inside one colourway to reach that figure, so a single design in a single colour is the easiest way to start. Each additional colour is treated as its own minimum, because a new colour means a different fabric reservation, a separate cut and often a separate decoration setup.Sampling is charged and quoted upfront, and the sample fee is offset only when the bulk volume is large enough. A sample is a small production run in its own right, covering pattern work, a fabric reservation, cutting, sewing and decoration, which is why it carries a real cost. Sampling takes about two weeks from confirmed artwork and fabric.

Question 7

Yes. With an MOQ of 100 pieces per style, per color, you can place a trial order before committing to a larger production run. This is the approach

Accepted Answer

Can I order t-shirts in small trial quantities before bulk productionThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Cotton jersey from 180gsm to 300gsm is the base, and heavier jersey is what holds a boxy, oversized silhouette after washing. Neck rib tension, shoulder taping and sleeve shape decide whether a tee keeps its form through a season, not the artwork..Special techniques are tested on the actual material, because they behave differently across fabrics.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.A purchase order is matched to the approved sample, which is the reference both sides measure against.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Garment dye, acid wash and enzyme wash are all common and each adds a development round, since the same recipe behaves differently on different jersey weights.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 8

Our standard MOQ is 100 pieces per style, per color. The minimum applies to each individual style you order, rather than being a total across a who

Accepted Answer

MOQ for t-shirtsOur standard MOQ is 100 pieces per style, per color. The minimum applies to each individual style you order, rather than being a total across a whole collection, so a brand can start with one design and still meet the requirement.Sizes can be mixed within one colorway to reach the minimum. For example, a single style and colour can be ordered as a spread of sizes such as S, M, L and XL totalling 100 pieces. Different colours are treated as separate orders, because each colour involves separate fabric or dye lots, separate cutting and separate setup.This structure exists to make small runs practical. Many factories require several hundred pieces per style, which forces young brands to tie up capital in inventory before they know what sells. A 100-piece minimum lets you test a design, gather real customer feedback and scale only what performs.If you are planning several styles, we confirm the minimum for each one in the written quotation and can suggest quantities that keep the first order efficient.Sampling is charged and quoted upfront, and the sample fee is offset only when the bulk volume is large enough. A sample is a small production run in its own right, covering pattern work, a fabric reservation, cutting, sewing and decoration, which is why it carries a real cost. Sampling takes about two weeks from confirmed artwork and fabric.Bulk production takes three to four weeks after sample approval. That window covers fabric arrival, cutting, sewing, decoration and finishing, and it starts from the approved sample rather than from the enquiry date. Freight planning belongs at the same stage, because sea, air and land options differ in transit time and cost.

Question 9

If goods do not meet the agreed specification, contact us as soon as possible with photographs, the style reference and, where relevant, the carton nu

Accepted Answer

What is your policy on Custom Accessories returns for quality issuesEach stage leaves a checkpoint behind it, which is what makes a defect traceable instead of a surprise.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.Warranty, returns and replacement are commercial terms rather than production details, so they are set out in the contract and confirmed with your order instead of being stated as a general promise.

Question 10

Colour is approved before production, so bulk goods are made to an agreed reference rather than to an expectation. Depending on the material, approval

Accepted Answer

Colour approval before productionColour is approved before production, so bulk goods are made to an agreed reference rather than to an expectation. Depending on the material, approval is made against a physical swatch or a lab dip prepared for the specific fabric.For colours supported from stock, the reference is a swatch of the actual fabric. Where a colour has to be dyed, a lab dip is prepared and compared against your target before bulk dyeing begins, so the shade is settled in advance.We recommend approving a physical sample rather than a screen image, because displays and lighting vary and a colour can look different on a monitor than on fabric. This is especially true for washed and garment-dyed finishes.Because colour is checked against the same reference throughout the order, this also supports consistency between cartons and, later, between reorders of accessories.Tell us your colour target and the fabric you have in mind and we will confirm the approval route for your order.It helps to think of the minimum as a per-colourway figure. One style in one colour is one minimum; the same style in three colours is three. Mixed sizes inside a colourway are normal and expected, which is why a size curve can be built around the figure rather than the other way round.Once the sample is approved, bulk production runs three to four weeks, after which the goods are packed and shipped by sea, air or land depending on urgency and volume. Working backwards from a launch date is the reliable way to confirm whether a schedule holds, because it exposes the freight and clearance time that a production-only plan tends to hide.

Question 11

Yes. If you already have measurements or a specification, we produce to your figures rather than to a standard chart. Send the measurement points and

Accepted Answer

Producing to your exact measurements and specsYes. If you already have measurements or a specification, we produce to your figures rather than to a standard chart. Send the measurement points and how each one is taken, so there is no ambiguity later about where a measurement is read.In practice we build a measurement chart for your style, produce the sample against it, and you approve the fit on that sample. The approved sample and the chart then become the reference for bulk production and for any reorder.Where you have a physical garment rather than a chart, we can measure it and agree the points with you, because measuring the actual piece removes uncertainty about how a measurement is defined, such as chest at underarm or chest one inch below.Every measurement has a tolerance, since fabric and construction behave differently across sizes and after washing. The acceptable range is agreed with you rather than left open, and it is recorded with the specification.Send your chart, specification or reference garment and we will confirm what is needed to produce accessories to your exact requirement.It helps to think of the minimum as a per-colourway figure. One style in one colour is one minimum; the same style in three colours is three. Mixed sizes inside a colourway are normal and expected, which is why a size curve can be built around the figure rather than the other way round.Once the sample is approved, bulk production runs three to four weeks, after which the goods are packed and shipped by sea, air or land depending on urgency and volume. Working backwards from a launch date is the reliable way to confirm whether a schedule holds, because it exposes the freight and clearance time that a production-only plan tends to hide.

Question 12

Our after-sales commitment is that if delivered goods do not match the agreed specification, we review the point promptly against the approved samp

Accepted Answer

What after-sales confirm do you provide for Custom AccessoriesThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.A purchase order is matched to the approved sample, which is the reference both sides measure against.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.We would rather raise a risk before sampling than discover it during bulk production.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.Dates and outcomes are confirmed in writing rather than promised in advance, and where something cannot be confirmed we say so before an order is placed.Warranty, returns and replacement are commercial terms rather than production details, so they are set out in the contract and confirmed with your order instead of being stated as a general promise.

Question 13

We value repeat business and price each order according to its quantity, style and materials, so a reorder is quoted on its own merits. Any conside

Accepted Answer

Do you offer discounts for repeat Custom Accessories buyersThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..Production checks happen at cutting, at sewing, at finishing and before packing.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Lead time is driven by component sourcing, because small items often depend on hardware or trim suppliers more than on sewing capacity.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.Repeat-order pricing and volume terms are quoted per order and confirmed in the contract rather than published as a standing discount.

Question 14

We plan delivery dates carefully and keep you informed, but we do not promise a fixed date in advance, because timing depends on factors such as ma

Accepted Answer

Can you confirm on-time delivery for Custom AccessoriesThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..Sizing is agreed inside one colourway, so a size run can follow your real sales curve.The approved sample is kept as the working reference so a repeat order behaves like the first one.Special techniques are tested on the actual material, because they behave differently across fabrics.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.Dates and outcomes are confirmed in writing rather than promised in advance, and where something cannot be confirmed we say so before an order is placed.

Question 15

The standard export packing is folded garments in polybags, packed into cartons with an order reference and a packing list. Sizes and colours are e

Accepted Answer

What is the standard packaging for exported Custom AccessoriesExport packaging has to protect the goods in transit and stay consistent between the first order and the reorder.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..Special techniques are tested on the actual material, because they behave differently across fabrics.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Decoration placement and technique are settled on the physical sample instead of on a screen.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.A purchase order is matched to the approved sample, which is the reference both sides measure against.Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 16

After we review your enquiry we issue a written quotation covering the item, the quantity, the unit price and the terms, so you have a document to

Accepted Answer

Do you provide a written quotation and spec sheet for Custom AccessoriesThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..A written brief shortens the first round, since the specification can be confirmed before sampling begins.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Production checks happen at cutting, at sewing, at finishing and before packing.Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 17

Both five-panel and six-panel caps can be produced. The five-panel construction gives a lower, flatter profile that suits a casual, modern look, while

Accepted Answer

Can you produce 5-panel and 6-panel capsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery is the default because it holds shape on a curved panel, while woven patches and rubberised badges add a heavier streetwear look. Inspection focuses on embroidery registration at the front panel, brim curvature and stitch density at the closure..Freight is quoted as its own line so the transit cost is visible before the goods are finished.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 18

Custom woven labels, printed labels and hangtags can all be applied to caps, and they can carry your brand so the product is presented as yours rather

Accepted Answer

Do you offer custom woven labels and tags on capsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Cap bodies are built from cotton twill, canvas, corduroy or nylon, and the fabric decides how the crown holds its shape after wear. The panel count, the sweatband and the closure are the three parts customers notice, and a five-panel and a six-panel need different coverage and seam placement..The approved sample is kept as the working reference so a repeat order behaves like the first one.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Special techniques are tested on the actual material, because they behave differently across fabrics.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 19

The MOQ is 100 pieces per style, per colour, as it is for the rest of our range. Sizes can be mixed within one colourway where the style allows, while

Accepted Answer

What is your MOQ for custom hats and capsMinimums are about setup cost: fabric, cutting and finishing each carry a fixed step that does not shrink with volume.Embroidery is the default because it holds shape on a curved panel, while woven patches and rubberised badges add a heavier streetwear look. Inspection focuses on embroidery registration at the front panel, brim curvature and stitch density at the closure..We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Decoration placement and technique are settled on the physical sample instead of on a screen.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 20

Logos can be applied to caps by embroidery or by patch, and the better method depends on the artwork. Bold, simple shapes work well in direct embroide

Accepted Answer

Can you embroider or patch custom logos on capsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Cap bodies are built from cotton twill, canvas, corduroy or nylon, and the fabric decides how the crown holds its shape after wear. The panel count, the sweatband and the closure are the three parts customers notice, and a five-panel and a six-panel need different coverage and seam placement..Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Bulk production starts once the sample is approved in writing, not while the specification is still moving.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 21

Common cap styles can be produced, including snapback and dad-hat shapes and similar six-panel and curved-brim constructions, as well as knit beanies,

Accepted Answer

What cap styles do you offer, such as snapback, dad hat, and beanieThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery is the default because it holds shape on a curved panel, while woven patches and rubberised badges add a heavier streetwear look. Inspection focuses on embroidery registration at the front panel, brim curvature and stitch density at the closure..Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.A purchase order is matched to the approved sample, which is the reference both sides measure against.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 22

A reorder can be placed in a different colourway. Because MOQ applies per style and per colour, a new colour is treated as its own order quantity,

Accepted Answer

Can I reorder accessories in a different colorway laterA repeat order is only as consistent as the specification that was written down before the first run.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.We would rather raise a risk before sampling than discover it during bulk production.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Bulk production starts once the sample is approved in writing, not while the specification is still moving.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Lead time is driven by component sourcing, because small items often depend on hardware or trim suppliers more than on sewing capacity.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 23

If delivered goods do not meet the agreed specification, tell us as soon as possible with photos and, where relevant, the carton and style referenc

Accepted Answer

Do you offer after-sales support if accessories does not meet expectationsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.Warranty, returns and replacement are commercial terms rather than production details, so they are set out in the contract and confirmed with your order instead of being stated as a general promise.

Question 24

We keep your patterns and specifications so that reorders match the original. How long they are retained is best agreed in writing for your account

Accepted Answer

How long do you keep my accessories patterns for future reordersA repeat order is only as consistent as the specification that was written down before the first run.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..Size approval happens on the sample, and the approved size set stays with the order for future repeats.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 25

A reorder is normally simpler than a first order because the pattern, specification and approvals already exist. It still needs a fresh order confi

Accepted Answer

What is your reorder process and lead time for accessoriesLead time is set by what the style requires rather than by the category name, so the honest answer names the steps that actually consume the weeks.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Decoration placement and technique are settled on the physical sample instead of on a screen.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 26

A competitive mix usually has a clear core, a few seasonal pieces, and accessories that lift average order value at low risk. We can help by mappin

Accepted Answer

Can you help me build a competitive product mix around accessoriesThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..A written brief shortens the first round, since the specification can be confirmed before sampling begins.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Production checks happen at cutting, at sewing, at finishing and before packing.Lead time is driven by component sourcing, because small items often depend on hardware or trim suppliers more than on sewing capacity.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 27

Across US and EU streetwear, the categories that recur are heavyweight tees, hoodies and sweatshirts, relaxed-fit bottoms, overshirts and simple ac

Accepted Answer

Which accessories styles sell best for streetwear brands in the US and EUThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Decoration placement and technique are settled on the physical sample instead of on a screen.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 28

We can share what we see being produced across our client base and the construction details that recur, such as heavier cottons, relaxed and boxy f

Accepted Answer

What streetwear trends should I stock in accessories for next seasonThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..Decoration placement and technique are settled on the physical sample instead of on a screen.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 29

We can support a launch that needs more than one style. Because we produce tops, bottoms, outerwear and accessories, a first range can be developed

Accepted Answer

Can you support my own brand launch with a full accessories rangeThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 30

Protecting an exclusive design means it is produced only for you. We do not sell your patterns, artwork or finished goods to other customers, and y

Accepted Answer

Do you protect my exclusive accessories designs from being resoldThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.Ownership, exclusivity and confidentiality are contractual terms, agreed in writing before development starts rather than assumed from a conversation.

FAQs

Are you looking for a reliable manufacturer?

Products

Customization

Business Model

Capability

About Us