Question 1

Yes. We can turn sketches or reference images into production-ready specifications covering measurements and grading, fabric and trim selection, se

Accepted Answer

Can you convert my sketches into a production-ready tech pack for accessoriesThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..Bulk production starts once the sample is approved in writing, not while the specification is still moving.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Special techniques are tested on the actual material, because they behave differently across fabrics.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 2

Yes. Our development team supports ODM projects by proposing fabrics, fits, construction details and decoration approaches based on your concept or

Accepted Answer

Do you have an in-house design team to help develop accessoriesThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.The approved sample is kept as the working reference so a repeat order behaves like the first one.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Special techniques are tested on the actual material, because they behave differently across fabrics.Lead time is driven by component sourcing, because small items often depend on hardware or trim suppliers more than on sewing capacity.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 3

Either works. A complete tech pack speeds development, because measurements, materials and construction are defined from the start. If you only hav

Accepted Answer

What do you need from me to start a accessories sample — a tech pack or a refereThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Special techniques are tested on the actual material, because they behave differently across fabrics.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 4

Yes. We can ship a physical sample before you commit to bulk production. Sampling is quoted separately and confirmed in advance, and the courier co

Accepted Answer

Can you ship a physical sample of accessories before I commitFreight choice is a trade-off between your drop date and your landed cost, and it is set per order.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.The approved sample is kept as the working reference so a repeat order behaves like the first one.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Special techniques are tested on the actual material, because they behave differently across fabrics.Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 5

Yes. After you approve the development sample, we produce a pre-production sample using the bulk fabric, trims and labels. This step confirms that

Accepted Answer

Do you provide a pre-production sample before mass production of accessoriesThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..Special techniques are tested on the actual material, because they behave differently across fabrics.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Decoration placement and technique are settled on the physical sample instead of on a screen.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 6

The number of included revision rounds depends on the style and on how many changes are requested, so it is confirmed in the sampling quotation rat

Accepted Answer

How many sample revisions are included for accessoriesThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.The approved sample is kept as the working reference so a repeat order behaves like the first one.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 7

Sampling is quoted separately, and the fee is confirmed before development starts. The cost depends on the style, the materials and the work involv

Accepted Answer

Is the sample fee refundable when I place a bulk order for accessoriesThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Production checks happen at cutting, at sewing, at finishing and before packing.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Lead time is driven by component sourcing, because small items often depend on hardware or trim suppliers more than on sewing capacity.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.Warranty, returns and replacement are commercial terms rather than production details, so they are set out in the contract and confirmed with your order instead of being stated as a general promise.

Question 8

Sample development typically takes about one to two weeks once the design and materials are confirmed. The main variables are the complexity of the

Accepted Answer

How long does it take to produce a accessories sampleThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Special techniques are tested on the actual material, because they behave differently across fabrics.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 9

The sampling process starts with your design, tech pack or reference. We review the style and advise on fabrics and construction, then issue a quot

Accepted Answer

How does the sampling process work for accessoriesThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Special techniques are tested on the actual material, because they behave differently across fabrics.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Decoration placement and technique are settled on the physical sample instead of on a screen.Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 10

Yes. We can add woven patches, rubber or silicone badges, embroidered patches and chenille letters. These are common in streetwear because they add

Accepted Answer

Can I add custom woven patches or rubber badges to accessoriesThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..We would rather raise a risk before sampling than discover it during bulk production.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.The approved sample is kept as the working reference so a repeat order behaves like the first one.Freight is quoted as its own line so the transit cost is visible before the goods are finished.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 11

Yes. We produce custom zippers and pulls, buttons, snaps, eyelets and drawcords, subject to availability, and we confirm the details in the quotati

Accepted Answer

Do you offer custom hardware such as zippers, buttons, and drawcords for accessoThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 12

Yes. Send us the sample itself, or detailed photographs with measurements and construction notes, and we will develop a counter-sample for your app

Accepted Answer

Can you replicate my existing accessories sample exactlyThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Decoration placement and technique are settled on the physical sample instead of on a screen.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 13

The number of colours you can use depends on the decoration method. Screen printing uses a separate screen for each colour, so it suits designs wit

Accepted Answer

How many colors can I use in a single design for accessoriesThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..A purchase order is matched to the approved sample, which is the reference both sides measure against.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Special techniques are tested on the actual material, because they behave differently across fabrics.Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 14

Yes. We produce garment dye, enzyme wash, stone wash, acid wash, distressing and sun-faded finishes, which are central to vintage and streetwear lo

Accepted Answer

Can you produce washed, vintage, or distressed finishes on accessoriesThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..Freight is quoted as its own line so the transit cost is visible before the goods are finished.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 15

Yes. We provide flat embroidery, three-dimensional puff embroidery and embroidered patches, and we frequently combine embroidery with printing on t

Accepted Answer

Do you provide embroidery as well as printing for accessoriesThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..A written brief shortens the first round, since the specification can be confirmed before sampling begins.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Production checks happen at cutting, at sewing, at finishing and before packing.Lead time is driven by component sourcing, because small items often depend on hardware or trim suppliers more than on sewing capacity.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 16

We offer screen printing, direct-to-garment (DTG), DTF and puff printing. Screen printing delivers strong, durable results at volume and suits bold

Accepted Answer

What printing methods do you offer for accessoriesThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Decoration placement and technique are settled on the physical sample instead of on a screen.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 17

Yes. We produce woven neck labels, printed labels, size labels, care labels, hang tags, polybags, boxes and custom packaging, all carrying your own

Accepted Answer

Can I customize the labels, tags, and packaging for accessoriesExport packaging has to protect the goods in transit and stay consistent between the first order and the reorder.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..Size approval happens on the sample, and the approved size set stays with the order for future repeats.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Production checks happen at cutting, at sewing, at finishing and before packing.Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 18

Colour consistency is controlled through three steps. First, lab dips: dye samples are prepared and approved for each colour before bulk fabric is

Accepted Answer

How do you ensure color consistency across a accessories bulk orderThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Size approval happens on the sample, and the approved size set stays with the order for future repeats.A purchase order is matched to the approved sample, which is the reference both sides measure against.Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 19

Yes. Heavyweight options across jersey, fleece, French terry, denim and canvas are part of our standard sourcing, which is why styles such as heavy

Accepted Answer

Do you carry heavy-weight fabrics suitable for premium accessoriesFabric is confirmed before sampling, because weight and weave change how the piece drapes and how the finish behaves.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.A purchase order is matched to the approved sample, which is the reference both sides measure against.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.We would rather raise a risk before sampling than discover it during bulk production.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 20

Yes. Send us a swatch and we will match it as closely as possible in composition, weight, colour and finish. If the exact fabric is not available,

Accepted Answer

Can you match a fabric swatch I send for my accessoriesMaterial availability limits colour options, so sourcing is checked against your specification rather than assumed.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..We would rather raise a risk before sampling than discover it during bulk production.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Lead time is driven by component sourcing, because small items often depend on hardware or trim suppliers more than on sewing capacity.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 21

Shrinkage is managed by choosing pre-shrunk or washed fabrics and by testing the result, rather than by quoting a single figure in advance. The act

Accepted Answer

What is the fabric shrinkage rate for your accessories after washingFabric is confirmed before sampling, because weight and weave change how the piece drapes and how the finish behaves.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.We would rather raise a risk before sampling than discover it during bulk production.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 22

We can source organic, recycled and lower-impact fabrics when they are available for your project, including organic cotton, recycled polyester ble

Accepted Answer

Do you offer organic, recycled, or sustainable fabrics for accessoriesMaterial availability limits colour options, so sourcing is checked against your specification rather than assumed.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..The approved sample is kept as the working reference so a repeat order behaves like the first one.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Special techniques are tested on the actual material, because they behave differently across fabrics.Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 23

Yes. We can source or develop specific blends such as cotton-poly, French terry, brushed fleece, twill, canvas and denim, as well as technical blen

Accepted Answer

Can you source specific fabric blends for accessories, such as cotton-poly or FrFabric is confirmed before sampling, because weight and weave change how the piece drapes and how the finish behaves.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..Production checks happen at cutting, at sewing, at finishing and before packing.Freight is quoted as its own line so the transit cost is visible before the goods are finished.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 24

For streetwear, brands usually choose heavier fabrics because they hold their shape, drape with more structure and carry prints and embroidery well

Accepted Answer

Which fabric weight (GSM) do you recommend for accessoriesMaterial availability limits colour options, so sourcing is checked against your specification rather than assumed.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Decoration placement and technique are settled on the physical sample instead of on a screen.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Lead time is driven by component sourcing, because small items often depend on hardware or trim suppliers more than on sewing capacity.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 25

We work with a wide range of fabrics for streetwear: cotton and cotton blends, heavyweight jersey, French terry, fleece, denim, twill, canvas, rips

Accepted Answer

What fabrics are available for accessoriesFabric is confirmed before sampling, because weight and weave change how the piece drapes and how the finish behaves.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Production checks happen at cutting, at sewing, at finishing and before packing.The approved sample is kept as the working reference so a repeat order behaves like the first one.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Coating, plating and dyeing are used selectively, and any plated hardware has to be tested for wear because it shows quickly on a small item.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 26

We work with bank transfer between companies as the standard payment method. Whether a letter of credit is suitable depends on the order size, the

Accepted Answer

Do you offer L/C or T/T for large accessories ordersThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Decoration placement and technique are settled on the physical sample instead of on a screen.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 27

Balance terms are agreed in the quotation before production. If you plan to inspect the goods before the final payment, tell us early so the paymen

Accepted Answer

Can I pay the balance after receiving accessories inspection reportThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Production checks happen at cutting, at sewing, at finishing and before packing.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.The payment schedule, inspection arrangements and any balance release are set out in the contract and confirmed in the quotation before production begins.

Question 28

A deposit is commonly required to start production, with the balance due according to the agreed schedule. The exact percentage and the milestone a

Accepted Answer

Do you require a deposit for accessories production, and what percentageThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..A written brief shortens the first round, since the specification can be confirmed before sampling begins.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Lead time is driven by component sourcing, because small items often depend on hardware or trim suppliers more than on sewing capacity.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 29

Payment is made by bank transfer between companies. The full schedule is confirmed in the quotation and order documents, so both sides know the pay

Accepted Answer

What payment terms do you accept for accessories ordersThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Production checks happen at cutting, at sewing, at finishing and before packing.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Coating, plating and dyeing are used selectively, and any plated hardware has to be tested for wear because it shows quickly on a small item.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.The payment schedule, inspection arrangements and any balance release are set out in the contract and confirmed in the quotation before production begins.

Question 30

We aim to respond quickly. Send your design, tech pack or reference together with quantities and your target market, and our team will confirm the

Accepted Answer

Can I get a formal quotation for accessories within 24 hoursThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Bulk production starts once the sample is approved in writing, not while the specification is still moving.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Decoration placement and technique are settled on the physical sample instead of on a screen.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

FAQs

Are you looking for a reliable manufacturer?

Products

Customization

Business Model

Capability

About Us