Question 1

We work with bank transfer between companies as the standard payment method. Whether a letter of credit is suitable depends on the order size, the

Accepted Answer

Do you offer L/C or T/T for large jeans ordersThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..A written brief shortens the first round, since the specification can be confirmed before sampling begins.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Production checks happen at cutting, at sewing, at finishing and before packing.Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 2

A deposit is commonly required to start production, with the balance due according to the agreed schedule. The exact percentage and the milestone a

Accepted Answer

Do you require a deposit for jeans production, and what percentageThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim weight and construction drive everything: a heavier rigid denim holds a structured leg, while a lightweight denim drapes and photographs differently. Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels..Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Bulk production starts once the sample is approved in writing, not while the specification is still moving.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 3

Payment is made by bank transfer between companies. The full schedule is confirmed in the quotation and order documents, so both sides know the pay

Accepted Answer

What payment terms do you accept for jeans ordersThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Decoration placement and technique are settled on the physical sample instead of on a screen.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.The payment schedule, inspection arrangements and any balance release are set out in the contract and confirmed in the quotation before production begins.

Question 4

We normally quote in USD. Accepted Incoterms depend on your destination, your preferred logistics arrangement and the shipping method, so they are

Accepted Answer

What currencies and Incoterms do you quote for jeansThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Bulk production starts once the sample is approved in writing, not while the specification is still moving.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 5

Yes. We can plan orders that combine different garment categories in one production schedule, for example tees together with hoodies and bottoms. E

Accepted Answer

Do you support mixed-category orders with jeans and other itemsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim weight and construction drive everything: a heavier rigid denim holds a structured leg, while a lightweight denim drapes and photographs differently. Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels..Decoration placement and technique are settled on the physical sample instead of on a screen.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 6

Yes, sizes can be mixed within one colorway to reach the minimum. A single style and colour can be ordered as a spread of sizes, for example S, M,

Accepted Answer

Can I mix sizes and colors within the MOQ for jeansMinimums are about setup cost: fabric, cutting and finishing each carry a fixed step that does not shrink with volume.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..Decoration placement and technique are settled on the physical sample instead of on a screen.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.A purchase order is matched to the approved sample, which is the reference both sides measure against.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Lead time is driven by the wash recipe: a multi-step finish takes longer to develop and longer to repeat consistently.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 7

We quote sampling and any optional services in advance, and the quotation itemizes the main cost elements: sample development, fabric and trims, cu

Accepted Answer

Are there hidden tooling or setup fees for custom jeansThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim weight and construction drive everything: a heavier rigid denim holds a structured leg, while a lightweight denim drapes and photographs differently. Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels..Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Production checks happen at cutting, at sewing, at finishing and before packing.The approved sample is kept as the working reference so a repeat order behaves like the first one.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 8

Samples are one-off development pieces, so their unit cost is higher than bulk production. A sample involves pattern development, decoration or was

Accepted Answer

What is the price difference between sample and bulk orders of jeansThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Special techniques are tested on the actual material, because they behave differently across fabrics.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Decoration placement and technique are settled on the physical sample instead of on a screen.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 9

Yes. Unit pricing typically improves as quantity increases, and we can quote two or three quantity levels so you can compare the effect of volume o

Accepted Answer

Do you offer tiered pricing for jeans based on quantity breaksThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim weight and construction drive everything: a heavier rigid denim holds a structured leg, while a lightweight denim drapes and photographs differently. Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels..Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.The approved sample is kept as the working reference so a repeat order behaves like the first one.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Special techniques are tested on the actual material, because they behave differently across fabrics.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 10

The unit price of jeans depends on several elements: fabric and weight, construction and fit complexity, decoration such as printing, embroidery or

Accepted Answer

How unit price is calculatedThe unit price of jeans depends on several elements: fabric and weight, construction and fit complexity, decoration such as printing, embroidery or washing, labels and packaging, and the total quantity you order. Each of these changes the cost structure, which is why we quote per project rather than from a fixed price list.Fixed costs, including pattern development, machine setup, screen or embroidery setup and packing preparation, are spread across the number of pieces produced. That is why larger volumes normally bring a lower unit price: the same fixed cost is divided by more units.To make comparison easy, we provide an itemized quotation showing the main cost elements, and we can quote two or three quantity levels so you can see how the price changes with volume. If your design is still evolving, we can also indicate which specification choices have the biggest effect on cost.Send your design and target quantities and we will prepare a clear, itemized quotation for your project.The minimum is 100 pieces per style, per color, not per order. Sizes can be mixed inside one colourway to reach that figure, so a single design in a single colour is the easiest way to start. Each additional colour is treated as its own minimum, because a new colour means a different fabric reservation, a separate cut and often a separate decoration setup.Sampling is charged and quoted upfront, and the sample fee is offset only when the bulk volume is large enough. A sample is a small production run in its own right, covering pattern work, a fabric reservation, cutting, sewing and decoration, which is why it carries a real cost. Sampling takes about two weeks from confirmed artwork and fabric.

Question 11

Yes. With an MOQ of 100 pieces per style, per color, you can place a trial order before committing to a larger production run. This is the approach

Accepted Answer

Can I order jeans in small trial quantities before bulk productionThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim weight and construction drive everything: a heavier rigid denim holds a structured leg, while a lightweight denim drapes and photographs differently. Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels..Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Decoration placement and technique are settled on the physical sample instead of on a screen.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 12

Our standard MOQ is 100 pieces per style, per color. The minimum applies to each individual style you order, rather than being a total across a who

Accepted Answer

MOQ for jeansOur standard MOQ is 100 pieces per style, per color. The minimum applies to each individual style you order, rather than being a total across a whole collection, so a brand can start with one design and still meet the requirement.Sizes can be mixed within one colorway to reach the minimum. For example, a single style and colour can be ordered as a spread of sizes such as S, M, L and XL totalling 100 pieces. Different colours are treated as separate orders, because each colour involves separate fabric or dye lots, separate cutting and separate setup.This structure exists to make small runs practical. Many factories require several hundred pieces per style, which forces young brands to tie up capital in inventory before they know what sells. A 100-piece minimum lets you test a design, gather real customer feedback and scale only what performs.If you are planning several styles, we confirm the minimum for each one in the written quotation and can suggest quantities that keep the first order efficient.Sampling is charged and quoted upfront, and the sample fee is offset only when the bulk volume is large enough. A sample is a small production run in its own right, covering pattern work, a fabric reservation, cutting, sewing and decoration, which is why it carries a real cost. Sampling takes about two weeks from confirmed artwork and fabric.Bulk production takes three to four weeks after sample approval. That window covers fabric arrival, cutting, sewing, decoration and finishing, and it starts from the approved sample rather than from the enquiry date. Freight planning belongs at the same stage, because sea, air and land options differ in transit time and cost.

Question 13

We keep your patterns and specifications so that reorders match the original. How long they are retained is best agreed in writing for your account

Accepted Answer

How long do you keep my t-shirts patterns for future reordersA repeat order is only as consistent as the specification that was written down before the first run.Screen print, DTG and puff or cracked print carry different setup costs and different durability, and print placement is best confirmed on the physical sample. Inspection covers print registration, neck rib measurement and shade consistency across the batch..Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 14

A reorder is normally simpler than a first order because the pattern, specification and approvals already exist. It still needs a fresh order confi

Accepted Answer

What is your reorder process and lead time for t-shirtsLead time is set by what the style requires rather than by the category name, so the honest answer names the steps that actually consume the weeks.Cotton jersey from 180gsm to 300gsm is the base, and heavier jersey is what holds a boxy, oversized silhouette after washing. Neck rib tension, shoulder taping and sleeve shape decide whether a tee keeps its form through a season, not the artwork..Special techniques are tested on the actual material, because they behave differently across fabrics.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 15

A competitive mix usually has a clear core, a few seasonal pieces, and accessories that lift average order value at low risk. We can help by mappin

Accepted Answer

Can you help me build a competitive product mix around t-shirtsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Screen print, DTG and puff or cracked print carry different setup costs and different durability, and print placement is best confirmed on the physical sample. Inspection covers print registration, neck rib measurement and shade consistency across the batch..We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Decoration placement and technique are settled on the physical sample instead of on a screen.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.We would rather raise a risk before sampling than discover it during bulk production.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Lead time is driven by decoration rather than by cutting, because each print colour and placement is set up separately.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 16

Across US and EU streetwear, the categories that recur are heavyweight tees, hoodies and sweatshirts, relaxed-fit bottoms, overshirts and simple ac

Accepted Answer

Which t-shirts styles sell best for streetwear brands in the US and EUThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Cotton jersey from 180gsm to 300gsm is the base, and heavier jersey is what holds a boxy, oversized silhouette after washing. Neck rib tension, shoulder taping and sleeve shape decide whether a tee keeps its form through a season, not the artwork..If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 17

We can share what we see being produced across our client base and the construction details that recur, such as heavier cottons, relaxed and boxy f

Accepted Answer

What streetwear trends should I stock in t-shirts for next seasonThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Screen print, DTG and puff or cracked print carry different setup costs and different durability, and print placement is best confirmed on the physical sample. Inspection covers print registration, neck rib measurement and shade consistency across the batch..The approved sample is kept as the working reference so a repeat order behaves like the first one.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Special techniques are tested on the actual material, because they behave differently across fabrics.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 18

We can support a launch that needs more than one style. Because we produce tops, bottoms, outerwear and accessories, a first range can be developed

Accepted Answer

Can you support my own brand launch with a full t-shirts rangeThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Cotton jersey from 180gsm to 300gsm is the base, and heavier jersey is what holds a boxy, oversized silhouette after washing. Neck rib tension, shoulder taping and sleeve shape decide whether a tee keeps its form through a season, not the artwork..Size approval happens on the sample, and the approved size set stays with the order for future repeats.A purchase order is matched to the approved sample, which is the reference both sides measure against.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Bulk production starts once the sample is approved in writing, not while the specification is still moving.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Inspection covers print registration, neck rib measurement and shade consistency across the batch.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 19

Bulk export packing is designed to protect the goods and move efficiently. Garments are usually folded and packed into polybags, then into export c

Accepted Answer

How is t-shirts packaged for bulk exportPackaging is specified with the style rather than decided at the end, so the goods arrive ready for your own labelling.Cotton jersey from 180gsm to 300gsm is the base, and heavier jersey is what holds a boxy, oversized silhouette after washing. Neck rib tension, shoulder taping and sleeve shape decide whether a tee keeps its form through a season, not the artwork..Special techniques are tested on the actual material, because they behave differently across fabrics.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.A purchase order is matched to the approved sample, which is the reference both sides measure against.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Inspection covers print registration, neck rib measurement and shade consistency across the batch.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 20

We ship worldwide by sea, air and express courier, and the right method depends on your order size, budget and how urgently you need the goods. Sma

Accepted Answer

How do you ship t-shirts internationallyShipping is quoted as its own line so you can weigh the transit time against the budget rather than discover it at the end.Cotton jersey from 180gsm to 300gsm is the base, and heavier jersey is what holds a boxy, oversized silhouette after washing. Neck rib tension, shoulder taping and sleeve shape decide whether a tee keeps its form through a season, not the artwork..Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.We would rather raise a risk before sampling than discover it during bulk production.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.The approved sample is kept as the working reference so a repeat order behaves like the first one.Inspection covers print registration, neck rib measurement and shade consistency across the batch.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 21

Yes. You are welcome to arrange a third-party inspection before shipment. Third-party checks are common on larger orders, and we cooperate with the

Accepted Answer

Can I send a third-party inspector to check t-shirts productionThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Screen print, DTG and puff or cracked print carry different setup costs and different durability, and print placement is best confirmed on the physical sample. Inspection covers print registration, neck rib measurement and shade consistency across the batch..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.A purchase order is matched to the approved sample, which is the reference both sides measure against.We would rather raise a risk before sampling than discover it during bulk production.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Neck rib tension, shoulder taping and sleeve shape decide whether a tee keeps its form through a season, not the artwork.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 22

Rush orders are handled case by case and depend on the production schedule at the time. Contact us as early as possible with your target date, and

Accepted Answer

Can you handle rush orders for t-shirtsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Screen print, DTG and puff or cracked print carry different setup costs and different durability, and print placement is best confirmed on the physical sample. Inspection covers print registration, neck rib measurement and shade consistency across the batch..If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Production checks happen at cutting, at sewing, at finishing and before packing.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.Capacity and the feasibility of a rush request depend on the current production schedule, so they are confirmed per order rather than quoted as a standing figure.

Question 23

Monthly output depends on the mix of styles in production, the fabrics involved and the season, so we confirm capacity for your specific order wind

Accepted Answer

How many units of t-shirts can you produce per monthThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Cotton jersey from 180gsm to 300gsm is the base, and heavier jersey is what holds a boxy, oversized silhouette after washing. Neck rib tension, shoulder taping and sleeve shape decide whether a tee keeps its form through a season, not the artwork..We would rather raise a risk before sampling than discover it during bulk production.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.The approved sample is kept as the working reference so a repeat order behaves like the first one.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Garment dye, acid wash and enzyme wash are all common and each adds a development round, since the same recipe behaves differently on different jersey weights.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 24

Bulk production generally takes about three to four weeks after sample approval, depending on order quantity, fabric availability and the level of

Accepted Answer

What is your production lead time for t-shirtsThe schedule depends on the number of processes in a style, which is why two items in the same category can finish weeks apart.Screen print, DTG and puff or cracked print carry different setup costs and different durability, and print placement is best confirmed on the physical sample. Inspection covers print registration, neck rib measurement and shade consistency across the batch..Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Neck rib tension, shoulder taping and sleeve shape decide whether a tee keeps its form through a season, not the artwork.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 25

Fit tolerance is agreed with you rather than applied as a fixed rule, because acceptable variation depends on the garment and the market. For most

Accepted Answer

What is your fit tolerance for t-shirtsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Screen print, DTG and puff or cracked print carry different setup costs and different durability, and print placement is best confirmed on the physical sample. Inspection covers print registration, neck rib measurement and shade consistency across the batch..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.The approved sample is kept as the working reference so a repeat order behaves like the first one.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Decoration placement and technique are settled on the physical sample instead of on a screen.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 26

Yes. Send your size chart and we will work to it, provided the increments are consistent and the measurements suit the fit you want. We review the

Accepted Answer

Can I send my own size chart for t-shirts productionMeasurements and tolerances are agreed on the sample before bulk cutting, which is what keeps a size run consistent.Cotton jersey from 180gsm to 300gsm is the base, and heavier jersey is what holds a boxy, oversized silhouette after washing. Neck rib tension, shoulder taping and sleeve shape decide whether a tee keeps its form through a season, not the artwork..Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.A purchase order is matched to the approved sample, which is the reference both sides measure against.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 27

Fit approval is handled through sampling. We produce a sample in the agreed size, usually a middle size for the range, and you evaluate the fit aga

Accepted Answer

How do you handle fit approval for t-shirtsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Screen print, DTG and puff or cracked print carry different setup costs and different durability, and print placement is best confirmed on the physical sample. Inspection covers print registration, neck rib measurement and shade consistency across the batch..A written brief shortens the first round, since the specification can be confirmed before sampling begins.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Production checks happen at cutting, at sewing, at finishing and before packing.Lead time is driven by decoration rather than by cutting, because each print colour and placement is set up separately.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 28

Yes. Extended sizes, including plus-size ranges, can be produced when the pattern is graded appropriately. The key point is that larger sizes are n

Accepted Answer

Can you produce plus-size or extended sizes for t-shirtsMeasurements and tolerances are agreed on the sample before bulk cutting, which is what keeps a size run consistent.Cotton jersey from 180gsm to 300gsm is the base, and heavier jersey is what holds a boxy, oversized silhouette after washing. Neck rib tension, shoulder taping and sleeve shape decide whether a tee keeps its form through a season, not the artwork..Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.A purchase order is matched to the approved sample, which is the reference both sides measure against.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 29

Yes. We work with custom size charts and grading rules supplied by the brand, and we can also develop sizing from a reference garment. Grading is c

Accepted Answer

Do you offer custom sizing and grading for t-shirtsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Screen print, DTG and puff or cracked print carry different setup costs and different durability, and print placement is best confirmed on the physical sample. Inspection covers print registration, neck rib measurement and shade consistency across the batch..Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Size approval happens on the sample, and the approved size set stays with the order for future repeats.A purchase order is matched to the approved sample, which is the reference both sides measure against.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 30

Our standard size range follows the charts most commonly used in the US and EU markets, and sizes can be adjusted to your own specification. A typi

Accepted Answer

What size range do you offer for t-shirtsMeasurements and tolerances are agreed on the sample before bulk cutting, which is what keeps a size run consistent.Cotton jersey from 180gsm to 300gsm is the base, and heavier jersey is what holds a boxy, oversized silhouette after washing. Neck rib tension, shoulder taping and sleeve shape decide whether a tee keeps its form through a season, not the artwork..Special techniques are tested on the actual material, because they behave differently across fabrics.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.The approved sample is kept as the working reference so a repeat order behaves like the first one.Inspection covers print registration, neck rib measurement and shade consistency across the batch.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

FAQs

Are you looking for a reliable manufacturer?

Products

Customization

Business Model

Capability

About Us