Question 1

We normally quote in USD. Accepted Incoterms depend on your destination, your preferred logistics arrangement and the shipping method, so they are

Accepted Answer

What currencies and Incoterms do you quote for accessoriesThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 2

Yes. We can plan orders that combine different garment categories in one production schedule, for example tees together with hoodies and bottoms. E

Accepted Answer

Do you support mixed-category orders with accessories and other itemsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..A purchase order is matched to the approved sample, which is the reference both sides measure against.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Special techniques are tested on the actual material, because they behave differently across fabrics.Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 3

Yes, sizes can be mixed within one colorway to reach the minimum. A single style and colour can be ordered as a spread of sizes, for example S, M,

Accepted Answer

Can I mix sizes and colors within the MOQ for accessoriesMinimums are about setup cost: fabric, cutting and finishing each carry a fixed step that does not shrink with volume.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..Bulk production starts once the sample is approved in writing, not while the specification is still moving.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Lead time is driven by component sourcing, because small items often depend on hardware or trim suppliers more than on sewing capacity.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 4

We quote sampling and any optional services in advance, and the quotation itemizes the main cost elements: sample development, fabric and trims, cu

Accepted Answer

Are there hidden tooling or setup fees for custom accessoriesThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Production checks happen at cutting, at sewing, at finishing and before packing.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 5

Samples are one-off development pieces, so their unit cost is higher than bulk production. A sample involves pattern development, decoration or was

Accepted Answer

What is the price difference between sample and bulk orders of accessoriesThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Woven labels, embossed logos, jacquard patterns and metal trims are the usual branding routes, chosen to suit the item's scale. Inspection focuses on hardware function, colour consistency across small units and edge finishing rather than on fit..Special techniques are tested on the actual material, because they behave differently across fabrics.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.A purchase order is matched to the approved sample, which is the reference both sides measure against.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 6

Yes. Unit pricing typically improves as quantity increases, and we can quote two or three quantity levels so you can compare the effect of volume o

Accepted Answer

Do you offer tiered pricing for accessories based on quantity breaksThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..Special techniques are tested on the actual material, because they behave differently across fabrics.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Decoration placement and technique are settled on the physical sample instead of on a screen.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 7

The unit price of accessories depends on several elements: fabric and weight, construction and fit complexity, decoration such as printing, embroid

Accepted Answer

How unit price is calculatedThe unit price of accessories depends on several elements: fabric and weight, construction and fit complexity, decoration such as printing, embroidery or washing, labels and packaging, and the total quantity you order. Each of these changes the cost structure, which is why we quote per project rather than from a fixed price list.Fixed costs, including pattern development, machine setup, screen or embroidery setup and packing preparation, are spread across the number of pieces produced. That is why larger volumes normally bring a lower unit price: the same fixed cost is divided by more units.To make comparison easy, we provide an itemized quotation showing the main cost elements, and we can quote two or three quantity levels so you can see how the price changes with volume. If your design is still evolving, we can also indicate which specification choices have the biggest effect on cost.Send your design and target quantities and we will prepare a clear, itemized quotation for your project.The minimum is 100 pieces per style, per color, not per order. Sizes can be mixed inside one colourway to reach that figure, so a single design in a single colour is the easiest way to start. Each additional colour is treated as its own minimum, because a new colour means a different fabric reservation, a separate cut and often a separate decoration setup.Sampling is charged and quoted upfront, and the sample fee is offset only when the bulk volume is large enough. A sample is a small production run in its own right, covering pattern work, a fabric reservation, cutting, sewing and decoration, which is why it carries a real cost. Sampling takes about two weeks from confirmed artwork and fabric.

Question 8

Yes. With an MOQ of 100 pieces per style, per color, you can place a trial order before committing to a larger production run. This is the approach

Accepted Answer

Can I order accessories in small trial quantities before bulk productionThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Accessories span metal hardware, webbing, leather and knitted textiles, so the material decision is made per item rather than per category. Assembly is often the hard part: belts need consistent hole spacing, socks need shape retention, and small goods need clean edge finishing..Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.The approved sample is kept as the working reference so a repeat order behaves like the first one.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Special techniques are tested on the actual material, because they behave differently across fabrics.Coating, plating and dyeing are used selectively, and any plated hardware has to be tested for wear because it shows quickly on a small item.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 9

Our standard MOQ is 100 pieces per style, per color. The minimum applies to each individual style you order, rather than being a total across a who

Accepted Answer

MOQ for accessoriesOur standard MOQ is 100 pieces per style, per color. The minimum applies to each individual style you order, rather than being a total across a whole collection, so a brand can start with one design and still meet the requirement.Sizes can be mixed within one colorway to reach the minimum. For example, a single style and colour can be ordered as a spread of sizes such as S, M, L and XL totalling 100 pieces. Different colours are treated as separate orders, because each colour involves separate fabric or dye lots, separate cutting and separate setup.This structure exists to make small runs practical. Many factories require several hundred pieces per style, which forces young brands to tie up capital in inventory before they know what sells. A 100-piece minimum lets you test a design, gather real customer feedback and scale only what performs.If you are planning several styles, we confirm the minimum for each one in the written quotation and can suggest quantities that keep the first order efficient.Sampling is charged and quoted upfront, and the sample fee is offset only when the bulk volume is large enough. A sample is a small production run in its own right, covering pattern work, a fabric reservation, cutting, sewing and decoration, which is why it carries a real cost. Sampling takes about two weeks from confirmed artwork and fabric.Bulk production takes three to four weeks after sample approval. That window covers fabric arrival, cutting, sewing, decoration and finishing, and it starts from the approved sample rather than from the enquiry date. Freight planning belongs at the same stage, because sea, air and land options differ in transit time and cost.

Question 10

If goods do not meet the agreed specification, contact us as soon as possible with photographs, the style reference and, where relevant, the carton nu

Accepted Answer

What is your policy on Custom Bottoms returns for quality issuesEach stage leaves a checkpoint behind it, which is what makes a defect traceable instead of a surprise.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Lead time depends on the finish and on whether a matching top is produced alongside.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.Warranty, returns and replacement are commercial terms rather than production details, so they are set out in the contract and confirmed with your order instead of being stated as a general promise.

Question 11

Fits are created by the pattern, so baggy, skinny, straight or relaxed shapes are drafted rather than achieved by adjusting a standard block. That is

Accepted Answer

Can you do custom fits such as baggy, skinny, and straight jeansThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..Freight is quoted as its own line so the transit cost is visible before the goods are finished.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.We would rather raise a risk before sampling than discover it during bulk production.Production checks happen at cutting, at sewing, at finishing and before packing.Lead time is driven by the wash recipe: a multi-step finish takes longer to develop and longer to repeat consistently.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 12

Our standard MOQ is 100 pieces per style, per color. The minimum applies to each individual style you order, rather than being a total across a who

Accepted Answer

What is your MOQ for custom jeansThe minimum is counted per style and per colour rather than per size, so the colour count is what decides the size of the commitment.Denim weight and construction drive everything: a heavier rigid denim holds a structured leg, while a lightweight denim drapes and photographs differently. Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels..Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 13

Custom rivets, buttons, zips, and leather or woven patches can be added to denim bottoms, and they are agreed with the specification so the same trim

Accepted Answer

Do you offer custom rivets, buttons, and leather patches on jeansThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Production checks happen at cutting, at sewing, at finishing and before packing.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 14

Distressed and ripped effects are created by hand-finishing the garment, so they are a workshop process rather than a print or a pattern change. Vinta

Accepted Answer

Can you produce distressed, ripped, and vintage-wash jeansThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim weight and construction drive everything: a heavier rigid denim holds a structured leg, while a lightweight denim drapes and photographs differently. Rise, leg opening and pocket placement define the fit, and rivets, bar tacks and topstitch density decide how premium the finished pair feels..Freight is quoted as its own line so the transit cost is visible before the goods are finished.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.We would rather raise a risk before sampling than discover it during bulk production.Production checks happen at cutting, at sewing, at finishing and before packing.Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 15

Denim for bottoms is commonly chosen between roughly 10 and 14 oz, with lighter weights giving a softer, more flexible feel and heavier weights giving

Accepted Answer

What denim weights and washes do you offerThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Laser distressing, embroidery and printed back graphics all need to be tested against the denim so the effect survives the final wash. Inspection covers shade matching across the batch, waist and inseam measurement tolerance, and hardware security..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.A purchase order is matched to the approved sample, which is the reference both sides measure against.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.We would rather raise a risk before sampling than discover it during bulk production.Lead time is driven by the wash recipe: a multi-step finish takes longer to develop and longer to repeat consistently.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 16

We keep your patterns and specifications so that reorders match the original. How long they are retained is best agreed in writing for your account

Accepted Answer

How long do you keep my bottoms patterns for future reordersA repeat order is only as consistent as the specification that was written down before the first run.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..Production checks happen at cutting, at sewing, at finishing and before packing.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 17

A reorder is normally simpler than a first order because the pattern, specification and approvals already exist. It still needs a fresh order confi

Accepted Answer

What is your reorder process and lead time for bottomsLead time is set by what the style requires rather than by the category name, so the honest answer names the steps that actually consume the weeks.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Special techniques are tested on the actual material, because they behave differently across fabrics.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 18

A competitive mix usually has a clear core, a few seasonal pieces, and accessories that lift average order value at low risk. We can help by mappin

Accepted Answer

Can you help me build a competitive product mix around bottomsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..Freight is quoted as its own line so the transit cost is visible before the goods are finished.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Lead time depends on the finish and on whether a matching top is produced alongside.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 19

Across US and EU streetwear, the categories that recur are heavyweight tees, hoodies and sweatshirts, relaxed-fit bottoms, overshirts and simple ac

Accepted Answer

Which bottoms styles sell best for streetwear brands in the US and EUThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.A purchase order is matched to the approved sample, which is the reference both sides measure against.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.We would rather raise a risk before sampling than discover it during bulk production.Wash intensity and coating are the main finish decisions, and every finish step on a bottom has to be repeatable across a full size run.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 20

We can share what we see being produced across our client base and the construction details that recur, such as heavier cottons, relaxed and boxy f

Accepted Answer

What streetwear trends should I stock in bottoms for next seasonThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..Bulk production starts once the sample is approved in writing, not while the specification is still moving.Special techniques are tested on the actual material, because they behave differently across fabrics.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Decoration placement and technique are settled on the physical sample instead of on a screen.Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 21

We can support a launch that needs more than one style. Because we produce tops, bottoms, outerwear and accessories, a first range can be developed

Accepted Answer

Can you support my own brand launch with a full bottoms rangeThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 22

Bulk export packing is designed to protect the goods and move efficiently. Garments are usually folded and packed into polybags, then into export c

Accepted Answer

How is bottoms packaged for bulk exportPackaging is specified with the style rather than decided at the end, so the goods arrive ready for your own labelling.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..Bulk production starts once the sample is approved in writing, not while the specification is still moving.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Decoration placement and technique are settled on the physical sample instead of on a screen.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.We would rather raise a risk before sampling than discover it during bulk production.Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 23

We ship worldwide by sea, air and express courier, and the right method depends on your order size, budget and how urgently you need the goods. Sma

Accepted Answer

How do you ship bottoms internationallyShipping is quoted as its own line so you can weigh the transit time against the budget rather than discover it at the end.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Production checks happen at cutting, at sewing, at finishing and before packing.The approved sample is kept as the working reference so a repeat order behaves like the first one.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 24

Yes. You are welcome to arrange a third-party inspection before shipment. Third-party checks are common on larger orders, and we cooperate with the

Accepted Answer

Can I send a third-party inspector to check bottoms productionThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Decoration placement and technique are settled on the physical sample instead of on a screen.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 25

Rush orders are handled case by case and depend on the production schedule at the time. Contact us as early as possible with your target date, and

Accepted Answer

Can you handle rush orders for bottomsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.A purchase order is matched to the approved sample, which is the reference both sides measure against.We would rather raise a risk before sampling than discover it during bulk production.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Lead time depends on the finish and on whether a matching top is produced alongside.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.Capacity and the feasibility of a rush request depend on the current production schedule, so they are confirmed per order rather than quoted as a standing figure.

Question 26

Monthly output depends on the mix of styles in production, the fabrics involved and the season, so we confirm capacity for your specific order wind

Accepted Answer

How many units of bottoms can you produce per monthThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..Production checks happen at cutting, at sewing, at finishing and before packing.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Wash intensity and coating are the main finish decisions, and every finish step on a bottom has to be repeatable across a full size run.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 27

Bulk production generally takes about three to four weeks after sample approval, depending on order quantity, fabric availability and the level of

Accepted Answer

What is your production lead time for bottomsThe schedule depends on the number of processes in a style, which is why two items in the same category can finish weeks apart.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..Size approval happens on the sample, and the approved size set stays with the order for future repeats.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Production checks happen at cutting, at sewing, at finishing and before packing.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 28

Fit tolerance is agreed with you rather than applied as a fixed rule, because acceptable variation depends on the garment and the market. For most

Accepted Answer

What is your fit tolerance for bottomsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..A purchase order is matched to the approved sample, which is the reference both sides measure against.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.We would rather raise a risk before sampling than discover it during bulk production.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 29

Yes. Send your size chart and we will work to it, provided the increments are consistent and the measurements suit the fit you want. We review the

Accepted Answer

Can I send my own size chart for bottoms productionFit is settled on the physical garment rather than on a chart, because tolerance is where size runs usually drift.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..Special techniques are tested on the actual material, because they behave differently across fabrics.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Decoration placement and technique are settled on the physical sample instead of on a screen.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Lead time depends on the finish and on whether a matching top is produced alongside.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 30

Fit approval is handled through sampling. We produce a sample in the agreed size, usually a middle size for the range, and you evaluate the fit aga

Accepted Answer

How do you handle fit approval for bottomsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..Special techniques are tested on the actual material, because they behave differently across fabrics.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Decoration placement and technique are settled on the physical sample instead of on a screen.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Lead time depends on the finish and on whether a matching top is produced alongside.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

FAQs

Are you looking for a reliable manufacturer?

Products

Customization

Business Model

Capability

About Us