Question 1

Yes. Extended sizes, including plus-size ranges, can be produced when the pattern is graded appropriately. The key point is that larger sizes are n

Accepted Answer

Can you produce plus-size or extended sizes for bottomsMeasurements and tolerances are agreed on the sample before bulk cutting, which is what keeps a size run consistent.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..Special techniques are tested on the actual material, because they behave differently across fabrics.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Decoration placement and technique are settled on the physical sample instead of on a screen.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 2

Yes. We work with custom size charts and grading rules supplied by the brand, and we can also develop sizing from a reference garment. Grading is c

Accepted Answer

Do you offer custom sizing and grading for bottomsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Production checks happen at cutting, at sewing, at finishing and before packing.The approved sample is kept as the working reference so a repeat order behaves like the first one.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 3

Our standard size range follows the charts most commonly used in the US and EU markets, and sizes can be adjusted to your own specification. A typi

Accepted Answer

What size range do you offer for bottomsMeasurements and tolerances are agreed on the sample before bulk cutting, which is what keeps a size run consistent.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.A purchase order is matched to the approved sample, which is the reference both sides measure against.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 4

Yes. We can develop a complete collection rather than a single style, covering tops, bottoms, outerwear and accessories as needed. Collection devel

Accepted Answer

Can you develop a full bottoms collection rather than a single styleThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Production checks happen at cutting, at sewing, at finishing and before packing.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Lead time depends on the finish and on whether a matching top is produced alongside.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 5

We treat client designs, fabrics and supplier information as confidential. An NDA can be signed before we review your designs or samples, and inter

Accepted Answer

How do you handle intellectual property and confidentiality for bottoms designsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Special techniques are tested on the actual material, because they behave differently across fabrics.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Decoration placement and technique are settled on the physical sample instead of on a screen.Wash intensity and coating are the main finish decisions, and every finish step on a bottom has to be repeatable across a full size run.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 6

For artwork, vector files such as AI, EPS or PDF are preferred because they scale cleanly for printing and embroidery. High-resolution PNG or PSD f

Accepted Answer

What file formats do you accept for bottoms artworkThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Production checks happen at cutting, at sewing, at finishing and before packing.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 7

Yes. We can turn sketches or reference images into production-ready specifications covering measurements and grading, fabric and trim selection, se

Accepted Answer

Can you convert my sketches into a production-ready tech pack for bottomsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..Decoration placement and technique are settled on the physical sample instead of on a screen.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.A purchase order is matched to the approved sample, which is the reference both sides measure against.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 8

Yes. Our development team supports ODM projects by proposing fabrics, fits, construction details and decoration approaches based on your concept or

Accepted Answer

Do you have an in-house design team to help develop bottomsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..Special techniques are tested on the actual material, because they behave differently across fabrics.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Decoration placement and technique are settled on the physical sample instead of on a screen.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.A purchase order is matched to the approved sample, which is the reference both sides measure against.Lead time depends on the finish and on whether a matching top is produced alongside.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 9

Either works. A complete tech pack speeds development, because measurements, materials and construction are defined from the start. If you only hav

Accepted Answer

What do you need from me to start a bottoms sample — a tech pack or a reference This is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Production checks happen at cutting, at sewing, at finishing and before packing.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 10

Yes. We can ship a physical sample before you commit to bulk production. Sampling is quoted separately and confirmed in advance, and the courier co

Accepted Answer

Can you ship a physical sample of bottoms before I commitFreight choice is a trade-off between your drop date and your landed cost, and it is set per order.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..The approved sample is kept as the working reference so a repeat order behaves like the first one.Freight is quoted as its own line so the transit cost is visible before the goods are finished.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 11

Yes. After you approve the development sample, we produce a pre-production sample using the bulk fabric, trims and labels. This step confirms that

Accepted Answer

Do you provide a pre-production sample before mass production of bottomsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 12

The number of included revision rounds depends on the style and on how many changes are requested, so it is confirmed in the sampling quotation rat

Accepted Answer

How many sample revisions are included for bottomsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Decoration placement and technique are settled on the physical sample instead of on a screen.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 13

Sample development typically takes about one to two weeks once the design and materials are confirmed. The main variables are the complexity of the

Accepted Answer

How long does it take to produce a bottoms sampleThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.A purchase order is matched to the approved sample, which is the reference both sides measure against.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 14

The sampling process starts with your design, tech pack or reference. We review the style and advise on fabrics and construction, then issue a quot

Accepted Answer

How does the sampling process work for bottomsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..We would rather raise a risk before sampling than discover it during bulk production.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.The approved sample is kept as the working reference so a repeat order behaves like the first one.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 15

Yes. We can add woven patches, rubber or silicone badges, embroidered patches and chenille letters. These are common in streetwear because they add

Accepted Answer

Can I add custom woven patches or rubber badges to bottomsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.The approved sample is kept as the working reference so a repeat order behaves like the first one.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Decoration placement and technique are settled on the physical sample instead of on a screen.Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 16

Yes. We produce custom zippers and pulls, buttons, snaps, eyelets and drawcords, subject to availability, and we confirm the details in the quotati

Accepted Answer

Do you offer custom hardware such as zippers, buttons, and drawcords for bottomsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.We would rather raise a risk before sampling than discover it during bulk production.Production checks happen at cutting, at sewing, at finishing and before packing.Special techniques are tested on the actual material, because they behave differently across fabrics.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Lead time depends on the finish and on whether a matching top is produced alongside.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 17

Yes. Send us the sample itself, or detailed photographs with measurements and construction notes, and we will develop a counter-sample for your app

Accepted Answer

Can you replicate my existing bottoms sample exactlyThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.The approved sample is kept as the working reference so a repeat order behaves like the first one.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Special techniques are tested on the actual material, because they behave differently across fabrics.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Wash intensity and coating are the main finish decisions, and every finish step on a bottom has to be repeatable across a full size run.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 18

The number of colours you can use depends on the decoration method. Screen printing uses a separate screen for each colour, so it suits designs wit

Accepted Answer

How many colors can I use in a single design for bottomsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.A purchase order is matched to the approved sample, which is the reference both sides measure against.We would rather raise a risk before sampling than discover it during bulk production.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 19

Yes. We produce garment dye, enzyme wash, stone wash, acid wash, distressing and sun-faded finishes, which are central to vintage and streetwear lo

Accepted Answer

Can you produce washed, vintage, or distressed finishes on bottomsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..Production checks happen at cutting, at sewing, at finishing and before packing.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 20

Yes. We provide flat embroidery, three-dimensional puff embroidery and embroidered patches, and we frequently combine embroidery with printing on t

Accepted Answer

Do you provide embroidery as well as printing for bottomsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Production checks happen at cutting, at sewing, at finishing and before packing.Lead time depends on the finish and on whether a matching top is produced alongside.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 21

We offer screen printing, direct-to-garment (DTG), DTF and puff printing. Screen printing delivers strong, durable results at volume and suits bold

Accepted Answer

What printing methods do you offer for bottomsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Decoration placement and technique are settled on the physical sample instead of on a screen.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 22

Colour consistency is controlled through three steps. First, lab dips: dye samples are prepared and approved for each colour before bulk fabric is

Accepted Answer

How do you ensure color consistency across a bottoms bulk orderThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 23

Yes. Heavyweight options across jersey, fleece, French terry, denim and canvas are part of our standard sourcing, which is why styles such as heavy

Accepted Answer

Do you carry heavy-weight fabrics suitable for premium bottomsFabric is confirmed before sampling, because weight and weave change how the piece drapes and how the finish behaves.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..Size approval happens on the sample, and the approved size set stays with the order for future repeats.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Production checks happen at cutting, at sewing, at finishing and before packing.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 24

Yes. Send us a swatch and we will match it as closely as possible in composition, weight, colour and finish. If the exact fabric is not available,

Accepted Answer

Can you match a fabric swatch I send for my bottomsMaterial availability limits colour options, so sourcing is checked against your specification rather than assumed.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..Bulk production starts once the sample is approved in writing, not while the specification is still moving.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Lead time depends on the finish and on whether a matching top is produced alongside.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 25

Shrinkage is managed by choosing pre-shrunk or washed fabrics and by testing the result, rather than by quoting a single figure in advance. The act

Accepted Answer

What is the fabric shrinkage rate for your bottoms after washingFabric is confirmed before sampling, because weight and weave change how the piece drapes and how the finish behaves.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 26

We can source organic, recycled and lower-impact fabrics when they are available for your project, including organic cotton, recycled polyester ble

Accepted Answer

Do you offer organic, recycled, or sustainable fabrics for bottomsMaterial availability limits colour options, so sourcing is checked against your specification rather than assumed.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Size approval happens on the sample, and the approved size set stays with the order for future repeats.A purchase order is matched to the approved sample, which is the reference both sides measure against.Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 27

Yes. We can source or develop specific blends such as cotton-poly, French terry, brushed fleece, twill, canvas and denim, as well as technical blen

Accepted Answer

Can you source specific fabric blends for bottoms, such as cotton-poly or FrenchFabric is confirmed before sampling, because weight and weave change how the piece drapes and how the finish behaves.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..Production checks happen at cutting, at sewing, at finishing and before packing.Freight is quoted as its own line so the transit cost is visible before the goods are finished.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 28

For streetwear, brands usually choose heavier fabrics because they hold their shape, drape with more structure and carry prints and embroidery well

Accepted Answer

Which fabric weight (GSM) do you recommend for bottomsMaterial availability limits colour options, so sourcing is checked against your specification rather than assumed.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..Bulk production starts once the sample is approved in writing, not while the specification is still moving.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Lead time depends on the finish and on whether a matching top is produced alongside.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 29

We work with a wide range of fabrics for streetwear: cotton and cotton blends, heavyweight jersey, French terry, fleece, denim, twill, canvas, rips

Accepted Answer

What fabrics are available for bottomsFabric is confirmed before sampling, because weight and weave change how the piece drapes and how the finish behaves.Denim, twill, canvas, fleece and terry all fall under bottoms, and the fabric decides whether the piece reads as streetwear, utility or comfort wear. Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most..We would rather raise a risk before sampling than discover it during bulk production.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.The approved sample is kept as the working reference so a repeat order behaves like the first one.Freight is quoted as its own line so the transit cost is visible before the goods are finished.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Wash intensity and coating are the main finish decisions, and every finish step on a bottom has to be repeatable across a full size run.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 30

We work with bank transfer between companies as the standard payment method. Whether a letter of credit is suitable depends on the order size, the

Accepted Answer

Do you offer L/C or T/T for large bottoms ordersThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Printed leg graphics, embroidery and applied patches are common, with placement set before assembly. Inspection covers waist measurement, inseam tolerance, pocket symmetry and shade matching across sizes..Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Special techniques are tested on the actual material, because they behave differently across fabrics.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Rise, leg shape and pocket construction define the fit, and the leg opening is what changes the customer most.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

FAQs

Are you looking for a reliable manufacturer?

Products

Customization

Business Model

Capability

About Us