Question 1

Across US and EU streetwear, the categories that recur are heavyweight tees, hoodies and sweatshirts, relaxed-fit bottoms, overshirts and simple acces

Accepted Answer

Which streetwear apparel styles sell best for streetwear brands in the US and EUThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Decoration method is matched to the fabric and to the price point, and the placement is confirmed on the physical sample. Each order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference..Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Size approval happens on the sample, and the approved size set stays with the order for future repeats.A purchase order is matched to the approved sample, which is the reference both sides measure against.Communication runs on written confirmations, so a specification, a timeline or a price agreed in a chat is treated as unconfirmed until it appears in the quotation.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 2

We can share what we see being produced across our client base and the construction details that recur, such as heavier cottons, relaxed and boxy fits

Accepted Answer

What streetwear trends should I stock in streetwear apparel for next seasonThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Fabric is specified per style, and the choice of weight and weave is confirmed before sampling so the sample and the bulk run match. Construction details are agreed per style in a written specification, covering trims, hardware, measurements and decoration placement..Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.The approved sample is kept as the working reference so a repeat order behaves like the first one.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Special techniques are tested on the actual material, because they behave differently across fabrics.Repeat orders are built on the approved sample and the size set kept on file, which is the only way a reorder can match the first run.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 3

We can support a launch that needs more than one style. Because we produce tops, bottoms, outerwear and accessories, a first range can be developed as

Accepted Answer

Can you support my own brand launch with a full streetwear apparel rangeThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Decoration method is matched to the fabric and to the price point, and the placement is confirmed on the physical sample. Each order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference..Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Bulk production starts once the sample is approved in writing, not while the specification is still moving.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Decoration placement and technique are settled on the physical sample instead of on a screen.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Development work happens before cutting, which is where a wash or a fit is settled rather than during bulk production.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 4

Protecting an exclusive design means it is produced only for you. We do not sell your patterns, artwork or finished goods to other customers, and your

Accepted Answer

Do you protect my exclusive streetwear apparel designs from being resoldThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Fabric is specified per style, and the choice of weight and weave is confirmed before sampling so the sample and the bulk run match. Construction details are agreed per style in a written specification, covering trims, hardware, measurements and decoration placement..Size approval happens on the sample, and the approved size set stays with the order for future repeats.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.Ownership, exclusivity and confidentiality are contractual terms, agreed in writing before development starts rather than assumed from a conversation.

Question 5

We can sign a non-disclosure agreement before reviewing your designs, tech packs or samples. This is common for brands with original artwork or propri

Accepted Answer

Do you sign an NDA before producing my streetwear apparel designsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Decoration method is matched to the fabric and to the price point, and the placement is confirmed on the physical sample. Each order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference..Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Production checks happen at cutting, at sewing, at finishing and before packing.The approved sample is kept as the working reference so a repeat order behaves like the first one.Production is scheduled around your order slot, so a confirmed date depends on the specification and the material being fixed before cutting.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.Ownership, exclusivity and confidentiality are contractual terms, agreed in writing before development starts rather than assumed from a conversation.

Question 6

We can apply your logo to the elements your customers see: neck labels, care labels, hangtags, woven patches, printed or embroidered branding, and the

Accepted Answer

Can you white-label streetwear apparel with my logo on labels and packagingPackaging is specified with the style rather than decided at the end, so the goods arrive ready for your own labelling.Fabric is specified per style, and the choice of weight and weave is confirmed before sampling so the sample and the bulk run match. Construction details are agreed per style in a written specification, covering trims, hardware, measurements and decoration placement..Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Special techniques are tested on the actual material, because they behave differently across fabrics.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Compliance and testing are confirmed per project rather than claimed in general, because the fibre content of a style decides which material certifications apply.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 7

The difference is who creates the product. In OEM you supply the design and we build to it exactly; in ODM we take part in creating the design, advisi

Accepted Answer

What is the difference between your OEM and ODM service for streetwear apparelThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Decoration method is matched to the fabric and to the price point, and the placement is confirmed on the physical sample. Each order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference..Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.The approved sample is kept as the working reference so a repeat order behaves like the first one.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Decoration placement and technique are settled on the physical sample instead of on a screen.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Communication runs on written confirmations, so a specification, a timeline or a price agreed in a chat is treated as unconfirmed until it appears in the quotation.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 8

Producing under your own brand and private label is a core part of what we do. Your brand can appear on the neck label, care label, hangtag, packaging

Accepted Answer

Can you produce streetwear apparel under my own brand and private labelThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Fabric is specified per style, and the choice of weight and weave is confirmed before sampling so the sample and the bulk run match. Construction details are agreed per style in a written specification, covering trims, hardware, measurements and decoration placement..Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Size approval happens on the sample, and the approved size set stays with the order for future repeats.A purchase order is matched to the approved sample, which is the reference both sides measure against.Repeat orders are built on the approved sample and the size set kept on file, which is the only way a reorder can match the first run.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 9

We offer both OEM and ODM. In OEM, you bring the design, tech pack or reference sample and we manufacture to your specification. In ODM, we help devel

Accepted Answer

Do you offer OEM and ODM services for streetwear apparelThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Fabric is specified per style, and the choice of weight and weave is confirmed before sampling so the sample and the bulk run match. Construction details are agreed per style in a written specification, covering trims, hardware, measurements and decoration placement..A written brief shortens the first round, since the specification can be confirmed before sampling begins.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 10

We are a direct apparel manufacturer with our own production base in Dongguan, China, and more than 20 years of experience. We are not a trading compa

Accepted Answer

Are you a manufacturer or a trading company for streetwear apparelThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Decoration method is matched to the fabric and to the price point, and the placement is confirmed on the physical sample. Each order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference..Size approval happens on the sample, and the approved size set stays with the order for future repeats.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 11

We are a manufacturer and normally ship bulk orders to your warehouse or your nominated forwarder. Direct-to-consumer shipping is a different model an

Accepted Answer

Do you drop-ship streetwear apparel directly to my customersShipping is quoted as its own line so you can weigh the transit time against the budget rather than discover it at the end.Fabric is specified per style, and the choice of weight and weave is confirmed before sampling so the sample and the bulk run match. Construction details are agreed per style in a written specification, covering trims, hardware, measurements and decoration placement..Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Production checks happen at cutting, at sewing, at finishing and before packing.The approved sample is kept as the working reference so a repeat order behaves like the first one.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Compliance and testing are confirmed per project rather than claimed in general, because the fibre content of a style decides which material certifications apply.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.Whether goods can ship directly to end customers depends on the destination and the documentation, so it is confirmed per order rather than offered as a standard service.

Question 12

Bulk export packing is designed to protect the goods and move efficiently. Garments are usually folded and packed into polybags, then into export cart

Accepted Answer

How is streetwear apparel packaged for bulk exportExport packaging has to protect the goods in transit and stay consistent between the first order and the reorder.Decoration method is matched to the fabric and to the price point, and the placement is confirmed on the physical sample. Each order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.A purchase order is matched to the approved sample, which is the reference both sides measure against.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.We would rather raise a risk before sampling than discover it during bulk production.Communication runs on written confirmations, so a specification, a timeline or a price agreed in a chat is treated as unconfirmed until it appears in the quotation.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 13

If you buy several products from different suppliers, we can sometimes receive and combine goods so they travel in one shipment, which can reduce frei

Accepted Answer

Can you consolidate streetwear apparel with other products in one shipmentShipping is quoted as its own line so you can weigh the transit time against the budget rather than discover it at the end.Fabric is specified per style, and the choice of weight and weave is confirmed before sampling so the sample and the bulk run match. Construction details are agreed per style in a written specification, covering trims, hardware, measurements and decoration placement..Decoration placement and technique are settled on the physical sample instead of on a screen.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.A purchase order is matched to the approved sample, which is the reference both sides measure against.We would rather raise a risk before sampling than discover it during bulk production.Repeat orders are built on the approved sample and the size set kept on file, which is the only way a reorder can match the first run.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 14

These Incoterms describe where our responsibility ends and yours begins. EXW means the goods are collected from our factory; FOB means we deliver them

Accepted Answer

Do you offer DDP, FOB, or EXW for streetwear apparelThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Decoration method is matched to the fabric and to the price point, and the placement is confirmed on the physical sample. Each order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference..Special techniques are tested on the actual material, because they behave differently across fabrics.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Decoration placement and technique are settled on the physical sample instead of on a screen.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.A purchase order is matched to the approved sample, which is the reference both sides measure against.Development work happens before cutting, which is where a wash or a fit is settled rather than during bulk production.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 15

Shipping cost depends on the weight or volume of the shipment, the route, the method and the Incoterm, so it is quoted per order rather than set as a

Accepted Answer

What is the shipping cost and transit time for streetwear apparelShipping is quoted as its own line so you can weigh the transit time against the budget rather than discover it at the end.Fabric is specified per style, and the choice of weight and weave is confirmed before sampling so the sample and the bulk run match. Construction details are agreed per style in a written specification, covering trims, hardware, measurements and decoration placement..Production checks happen at cutting, at sewing, at finishing and before packing.Freight is quoted as its own line so the transit cost is visible before the goods are finished.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Your own branding, including labels, hangtags and packaging, is specified with the style so the goods arrive ready for your identity.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 16

We ship worldwide by sea, air and express courier, and the right method depends on your order size, budget and how urgently you need the goods. Small

Accepted Answer

How do you ship streetwear apparel internationallyFreight choice is a trade-off between your drop date and your landed cost, and it is set per order.Decoration method is matched to the fabric and to the price point, and the placement is confirmed on the physical sample. Each order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference..A written brief shortens the first round, since the specification can be confirmed before sampling begins.Decoration placement and technique are settled on the physical sample instead of on a screen.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.A purchase order is matched to the approved sample, which is the reference both sides measure against.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Production is scheduled around your order slot, so a confirmed date depends on the specification and the material being fixed before cutting.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 17

Social-compliance schemes such as BSCI or Sedex relate to a specific factory and a specific audit, and the documents that satisfy your buyer depend on

Accepted Answer

Do you offer BSCI or Sedex audited factory documentation for streetwear apparelThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Fabric is specified per style, and the choice of weight and weave is confirmed before sampling so the sample and the bulk run match. Construction details are agreed per style in a written specification, covering trims, hardware, measurements and decoration placement..Freight is quoted as its own line so the transit cost is visible before the goods are finished.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.We hold BSCI social compliance certification. Other schemes, including material certifications such as OEKO-TEX, are confirmed per project at quotation stage, and a scheme that has not been confirmed for your order is not claimed on our side.

Question 18

CPSIA in the United States and REACH in the European Union set limits on substances in apparel and accessories. Whether your order is affected depends

Accepted Answer

Can you meet CPSIA or REACH requirements for streetwear apparelThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Decoration method is matched to the fabric and to the price point, and the placement is confirmed on the physical sample. Each order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.A purchase order is matched to the approved sample, which is the reference both sides measure against.We would rather raise a risk before sampling than discover it during bulk production.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Communication runs on written confirmations, so a specification, a timeline or a price agreed in a chat is treated as unconfirmed until it appears in the quotation.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.We hold BSCI social compliance certification. Other schemes, including material certifications such as OEKO-TEX, are confirmed per project at quotation stage, and a scheme that has not been confirmed for your order is not claimed on our side.

Question 19

Reports such as OEKO-TEX or SGS-type test reports are normally issued by independent laboratories on specific materials. Whether a report already exis

Accepted Answer

Do you provide test reports such as OEKO-TEX or SGS for streetwear apparelThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Fabric is specified per style, and the choice of weight and weave is confirmed before sampling so the sample and the bulk run match. Construction details are agreed per style in a written specification, covering trims, hardware, measurements and decoration placement..Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.We hold BSCI social compliance certification. Other schemes, including material certifications such as OEKO-TEX, are confirmed per project at quotation stage, and a scheme that has not been confirmed for your order is not claimed on our side.

Question 20

Apparel sold in the EU and US must meet rules on labelling, fibre content, care instructions and restricted substances. Whether a particular order com

Accepted Answer

Are your streetwear apparel compliant with EU and US apparel regulationsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Decoration method is matched to the fabric and to the price point, and the placement is confirmed on the physical sample. Each order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference..Special techniques are tested on the actual material, because they behave differently across fabrics.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Decoration placement and technique are settled on the physical sample instead of on a screen.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.A purchase order is matched to the approved sample, which is the reference both sides measure against.Development work happens before cutting, which is where a wash or a fit is settled rather than during bulk production.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 21

We do not publish a fixed list of certificates in advance, because which documents apply depends on the fabric, the process and the market you sell in

Accepted Answer

What certifications do you hold for streetwear apparel productionCompliance is confirmed per project as well as at company level, since the fibre content of a style decides which material certifications apply.Decoration method is matched to the fabric and to the price point, and the placement is confirmed on the physical sample. Each order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference..Freight is quoted as its own line so the transit cost is visible before the goods are finished.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Production is scheduled around your order slot, so a confirmed date depends on the specification and the material being fixed before cutting.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 22

Inspection reports with shipments We can provide inspection records and photos for your order, and where a third-party inspection has been arranged, t

Accepted Answer

Do you provide a quality inspection report with streetwear apparel shipmentsQuality is built into specific stages rather than inspected in at the end, so the checkpoints matter more than a general promise.Fabric is specified per style, and the choice of weight and weave is confirmed before sampling so the sample and the bulk run match. Construction details are agreed per style in a written specification, covering trims, hardware, measurements and decoration placement..Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Production checks happen at cutting, at sewing, at finishing and before packing.The approved sample is kept as the working reference so a repeat order behaves like the first one.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Compliance and testing are confirmed per project rather than claimed in general, because the fibre content of a style decides which material certifications apply.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.The payment schedule, inspection arrangements and any balance release are set out in the contract and confirmed in the quotation before production begins.

Question 23

Defective units after delivery If you find an issue after delivery, contact our team with photos and details within the period agreed in your order. W

Accepted Answer

How do you handle defective streetwear apparel units after deliveryThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Fabric is specified per style, and the choice of weight and weave is confirmed before sampling so the sample and the bulk run match. Construction details are agreed per style in a written specification, covering trims, hardware, measurements and decoration placement..Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.We would rather raise a risk before sampling than discover it during bulk production.Repeat orders are built on the approved sample and the size set kept on file, which is the only way a reorder can match the first run.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 24

Third-party inspections Yes. You are welcome to arrange a third-party inspection before shipment. Third-party checks are common on larger orders, and

Accepted Answer

Can I send a third-party inspector to check streetwear apparel productionThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Decoration method is matched to the fabric and to the price point, and the placement is confirmed on the physical sample. Each order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference..We would rather raise a risk before sampling than discover it during bulk production.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Bulk production starts once the sample is approved in writing, not while the specification is still moving.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Decoration placement and technique are settled on the physical sample instead of on a screen.Development work happens before cutting, which is where a wash or a fit is settled rather than during bulk production.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 25

Inspection approach We apply in-line checks during production and a final inspection against the approved sample before packing. Whether a formal samp

Accepted Answer

Do you inspect every unit of streetwear apparel or use AQL samplingThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Fabric is specified per style, and the choice of weight and weave is confirmed before sampling so the sample and the bulk run match. Construction details are agreed per style in a written specification, covering trims, hardware, measurements and decoration placement..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.We would rather raise a risk before sampling than discover it during bulk production.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Bulk production starts once the sample is approved in writing, not while the specification is still moving.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Compliance and testing are confirmed per project rather than claimed in general, because the fibre content of a style decides which material certifications apply.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 26

Quality control steps Quality control runs through the order rather than being a single check at the end. Materials and trims are inspected when they

Accepted Answer

What quality control steps do you apply to streetwear apparelEach stage leaves a checkpoint behind it, which is what makes a defect traceable instead of a surprise.Decoration method is matched to the fabric and to the price point, and the placement is confirmed on the physical sample. Each order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference..The approved sample is kept as the working reference so a repeat order behaves like the first one.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Decoration placement and technique are settled on the physical sample instead of on a screen.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Communication runs on written confirmations, so a specification, a timeline or a price agreed in a chat is treated as unconfirmed until it appears in the quotation.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 27

In-house production and partners We produce in our own factory in Dongguan, China, where cutting, sewing, finishing and quality control are coordinate

Accepted Answer

Do you produce streetwear apparel in-house or through subcontractorsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Fabric is specified per style, and the choice of weight and weave is confirmed before sampling so the sample and the bulk run match. Construction details are agreed per style in a written specification, covering trims, hardware, measurements and decoration placement..Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.We would rather raise a risk before sampling than discover it during bulk production.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Bulk production starts once the sample is approved in writing, not while the specification is still moving.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Repeat orders are built on the approved sample and the size set kept on file, which is the only way a reorder can match the first run.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 28

Peak season capacity Capacity during peak periods is planned per order. Peak weeks in apparel production typically follow the retail calendar, and the

Accepted Answer

What is your capacity during peak season for streetwear apparelThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Decoration method is matched to the fabric and to the price point, and the placement is confirmed on the physical sample. Each order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference..Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.The approved sample is kept as the working reference so a repeat order behaves like the first one.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Decoration placement and technique are settled on the physical sample instead of on a screen.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Development work happens before cutting, which is where a wash or a fit is settled rather than during bulk production.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.Capacity and the feasibility of a rush request depend on the current production schedule, so they are confirmed per order rather than quoted as a standing figure.

Question 29

Rush orders Rush orders are handled case by case and depend on the production schedule at the time. Contact us as early as possible with your target d

Accepted Answer

Can you handle rush orders for streetwear apparelThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Fabric is specified per style, and the choice of weight and weave is confirmed before sampling so the sample and the bulk run match. Construction details are agreed per style in a written specification, covering trims, hardware, measurements and decoration placement..Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Your own branding, including labels, hangtags and packaging, is specified with the style so the goods arrive ready for your identity.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.Capacity and the feasibility of a rush request depend on the current production schedule, so they are confirmed per order rather than quoted as a standing figure.

Question 30

Monthly production capacity Monthly output depends on the mix of styles in production, the fabrics involved and the season, so we confirm capacity for

Accepted Answer

How many units of streetwear apparel can you produce per monthThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Decoration method is matched to the fabric and to the price point, and the placement is confirmed on the physical sample. Each order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference..Freight is quoted as its own line so the transit cost is visible before the goods are finished.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

FAQs

Are you looking for a reliable manufacturer?

Products

Customization

Business Model

Capability

About Us