Question 1

Bulk export packing is designed to protect the goods and move efficiently. Garments are usually folded and packed into polybags, then into export c

Accepted Answer

How is bags packaged for bulk exportExport packaging has to protect the goods in transit and stay consistent between the first order and the reorder.Screen print and embroidery both work on canvas, while webbing labels and rubber patches suit utility styling. Checks concentrate on strap pull strength, zip function and seam integrity at the base..Size approval happens on the sample, and the approved size set stays with the order for future repeats.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Lead time depends on the number of hardware components and lining panels, as each adds a separate assembly step.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 2

We ship worldwide by sea, air and express courier, and the right method depends on your order size, budget and how urgently you need the goods. Sma

Accepted Answer

How do you ship jackets & shirts internationallyShipping is quoted as its own line so you can weigh the transit time against the budget rather than discover it at the end.Shell choice spans denim, twill, canvas, nylon, faux leather and coated fabrics, and the shell is the single largest driver of cost and perceived quality. Lining, interfacing, closures and pocket construction decide how the jacket hangs, and a jacket collapses around the shoulders when those are rushed..Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.We would rather raise a risk before sampling than discover it during bulk production.Production checks happen at cutting, at sewing, at finishing and before packing.Special techniques are tested on the actual material, because they behave differently across fabrics.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 3

We ship worldwide by sea, air and express courier, and the right method depends on your order size, budget and how urgently you need the goods. Sma

Accepted Answer

How do you ship bags internationallyFreight choice is a trade-off between your drop date and your landed cost, and it is set per order.Screen print and embroidery both work on canvas, while webbing labels and rubber patches suit utility styling. Checks concentrate on strap pull strength, zip function and seam integrity at the base..Decoration placement and technique are settled on the physical sample instead of on a screen.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.A purchase order is matched to the approved sample, which is the reference both sides measure against.We would rather raise a risk before sampling than discover it during bulk production.Lead time depends on the number of hardware components and lining panels, as each adds a separate assembly step.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 4

Yes. You are welcome to arrange a third-party inspection before shipment. Third-party checks are common on larger orders, and we cooperate with the

Accepted Answer

Can I send a third-party inspector to check jackets & shirts productionThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery is the most common treatment on outerwear because the panel area is large, with patches and appliqué used for heavier graphics. Checks centre on zip and button function, panel alignment, lining attachment and measurement tolerance at the shoulder..Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.We would rather raise a risk before sampling than discover it during bulk production.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 5

Yes. You are welcome to arrange a third-party inspection before shipment. Third-party checks are common on larger orders, and we cooperate with the

Accepted Answer

Can I send a third-party inspector to check bags productionThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Tote and crossbody bodies use canvas, cotton duck, ripstop nylon or coated polyester, chosen for how they carry load rather than how they look alone. Handle attachment, base reinforcement and zip quality are the structural decisions, and a bag that fails usually fails at the strap join rather than the shell..Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.A purchase order is matched to the approved sample, which is the reference both sides measure against.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.The approved sample is kept as the working reference so a repeat order behaves like the first one.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 6

Rush orders are handled case by case and depend on the production schedule at the time. Contact us as early as possible with your target date, and

Accepted Answer

Can you handle rush orders for jackets & shirtsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery is the most common treatment on outerwear because the panel area is large, with patches and appliqué used for heavier graphics. Checks centre on zip and button function, panel alignment, lining attachment and measurement tolerance at the shoulder..A purchase order is matched to the approved sample, which is the reference both sides measure against.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Special techniques are tested on the actual material, because they behave differently across fabrics.Lining, interfacing, closures and pocket construction decide how the jacket hangs, and a jacket collapses around the shoulders when those are rushed.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.Capacity and the feasibility of a rush request depend on the current production schedule, so they are confirmed per order rather than quoted as a standing figure.

Question 7

Monthly output depends on the mix of styles in production, the fabrics involved and the season, so we confirm capacity for your specific order wind

Accepted Answer

How many units of jackets & shirts can you produce per monthThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Shell choice spans denim, twill, canvas, nylon, faux leather and coated fabrics, and the shell is the single largest driver of cost and perceived quality. Lining, interfacing, closures and pocket construction decide how the jacket hangs, and a jacket collapses around the shoulders when those are rushed..Size approval happens on the sample, and the approved size set stays with the order for future repeats.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Production checks happen at cutting, at sewing, at finishing and before packing.Checks centre on zip and button function, panel alignment, lining attachment and measurement tolerance at the shoulder.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 8

Bulk production generally takes about three to four weeks after sample approval, depending on order quantity, fabric availability and the level of

Accepted Answer

What is your production lead time for jackets & shirtsLead time is set by what the style requires rather than by the category name, so the honest answer names the steps that actually consume the weeks.Shell choice spans denim, twill, canvas, nylon, faux leather and coated fabrics, and the shell is the single largest driver of cost and perceived quality. Lining, interfacing, closures and pocket construction decide how the jacket hangs, and a jacket collapses around the shoulders when those are rushed..Bulk production starts once the sample is approved in writing, not while the specification is still moving.Special techniques are tested on the actual material, because they behave differently across fabrics.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Decoration placement and technique are settled on the physical sample instead of on a screen.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 9

Fit tolerance is agreed with you rather than applied as a fixed rule, because acceptable variation depends on the garment and the market. For most

Accepted Answer

What is your fit tolerance for jackets & shirtsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Shell choice spans denim, twill, canvas, nylon, faux leather and coated fabrics, and the shell is the single largest driver of cost and perceived quality. Lining, interfacing, closures and pocket construction decide how the jacket hangs, and a jacket collapses around the shoulders when those are rushed..A purchase order is matched to the approved sample, which is the reference both sides measure against.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Special techniques are tested on the actual material, because they behave differently across fabrics.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 10

Yes. Send your size chart and we will work to it, provided the increments are consistent and the measurements suit the fit you want. We review the

Accepted Answer

Can I send my own size chart for jackets & shirts productionMeasurements and tolerances are agreed on the sample before bulk cutting, which is what keeps a size run consistent.Shell choice spans denim, twill, canvas, nylon, faux leather and coated fabrics, and the shell is the single largest driver of cost and perceived quality. Lining, interfacing, closures and pocket construction decide how the jacket hangs, and a jacket collapses around the shoulders when those are rushed..Special techniques are tested on the actual material, because they behave differently across fabrics.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.The approved sample is kept as the working reference so a repeat order behaves like the first one.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 11

Rush orders are handled case by case and depend on the production schedule at the time. Contact us as early as possible with your target date, and

Accepted Answer

Can you handle rush orders for bagsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Screen print and embroidery both work on canvas, while webbing labels and rubber patches suit utility styling. Checks concentrate on strap pull strength, zip function and seam integrity at the base..Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Handle attachment, base reinforcement and zip quality are the structural decisions, and a bag that fails usually fails at the strap join rather than the shell.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.Capacity and the feasibility of a rush request depend on the current production schedule, so they are confirmed per order rather than quoted as a standing figure.

Question 12

Fit approval is handled through sampling. We produce a sample in the agreed size, usually a middle size for the range, and you evaluate the fit aga

Accepted Answer

How do you handle fit approval for jackets & shirtsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Shell choice spans denim, twill, canvas, nylon, faux leather and coated fabrics, and the shell is the single largest driver of cost and perceived quality. Lining, interfacing, closures and pocket construction decide how the jacket hangs, and a jacket collapses around the shoulders when those are rushed..Freight is quoted as its own line so the transit cost is visible before the goods are finished.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 13

Monthly output depends on the mix of styles in production, the fabrics involved and the season, so we confirm capacity for your specific order wind

Accepted Answer

How many units of bags can you produce per monthThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Screen print and embroidery both work on canvas, while webbing labels and rubber patches suit utility styling. Checks concentrate on strap pull strength, zip function and seam integrity at the base..Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Lead time depends on the number of hardware components and lining panels, as each adds a separate assembly step.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 14

Yes. Extended sizes, including plus-size ranges, can be produced when the pattern is graded appropriately. The key point is that larger sizes are n

Accepted Answer

Can you produce plus-size or extended sizes for jackets & shirtsMeasurements and tolerances are agreed on the sample before bulk cutting, which is what keeps a size run consistent.Shell choice spans denim, twill, canvas, nylon, faux leather and coated fabrics, and the shell is the single largest driver of cost and perceived quality. Lining, interfacing, closures and pocket construction decide how the jacket hangs, and a jacket collapses around the shoulders when those are rushed..Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.Production checks happen at cutting, at sewing, at finishing and before packing.The approved sample is kept as the working reference so a repeat order behaves like the first one.Coating, washing and distressing each add a step, and coated shells cannot be washed the same way as a woven twill.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 15

Bulk production generally takes about three to four weeks after sample approval, depending on order quantity, fabric availability and the level of

Accepted Answer

What is your production lead time for bagsThe schedule depends on the number of processes in a style, which is why two items in the same category can finish weeks apart.Screen print and embroidery both work on canvas, while webbing labels and rubber patches suit utility styling. Checks concentrate on strap pull strength, zip function and seam integrity at the base..A written brief shortens the first round, since the specification can be confirmed before sampling begins.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Decoration placement and technique are settled on the physical sample instead of on a screen.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Handle attachment, base reinforcement and zip quality are the structural decisions, and a bag that fails usually fails at the strap join rather than the shell.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 16

Yes. We work with custom size charts and grading rules supplied by the brand, and we can also develop sizing from a reference garment. Grading is c

Accepted Answer

Do you offer custom sizing and grading for jackets & shirtsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery is the most common treatment on outerwear because the panel area is large, with patches and appliqué used for heavier graphics. Checks centre on zip and button function, panel alignment, lining attachment and measurement tolerance at the shoulder..Bulk production starts once the sample is approved in writing, not while the specification is still moving.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Decoration placement and technique are settled on the physical sample instead of on a screen.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.We would rather raise a risk before sampling than discover it during bulk production.Lining, interfacing, closures and pocket construction decide how the jacket hangs, and a jacket collapses around the shoulders when those are rushed.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 17

Our standard size range follows the charts most commonly used in the US and EU markets, and sizes can be adjusted to your own specification. A typi

Accepted Answer

What size range do you offer for jackets & shirtsFit is settled on the physical garment rather than on a chart, because tolerance is where size runs usually drift.Embroidery is the most common treatment on outerwear because the panel area is large, with patches and appliqué used for heavier graphics. Checks centre on zip and button function, panel alignment, lining attachment and measurement tolerance at the shoulder..Bulk production starts once the sample is approved in writing, not while the specification is still moving.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 18

Yes. We can develop a complete collection rather than a single style, covering tops, bottoms, outerwear and accessories as needed. Collection devel

Accepted Answer

Can you develop a full jackets & shirts collection rather than a single styleThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery is the most common treatment on outerwear because the panel area is large, with patches and appliqué used for heavier graphics. Checks centre on zip and button function, panel alignment, lining attachment and measurement tolerance at the shoulder..Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Bulk production starts once the sample is approved in writing, not while the specification is still moving.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Production is scheduled around a confirmed order slot, so a delivery date depends on the specification being fixed.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 19

We treat client designs, fabrics and supplier information as confidential. An NDA can be signed before we review your designs or samples, and inter

Accepted Answer

How do you handle intellectual property and confidentiality for jackets & shirtsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery is the most common treatment on outerwear because the panel area is large, with patches and appliqué used for heavier graphics. Checks centre on zip and button function, panel alignment, lining attachment and measurement tolerance at the shoulder..Bulk production starts once the sample is approved in writing, not while the specification is still moving.We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.Decoration placement and technique are settled on the physical sample instead of on a screen.Labels, hangtags and packaging can carry your own branding so the goods arrive ready to sell.We would rather raise a risk before sampling than discover it during bulk production.Lead time is among the longest of any category because lining, interfacing and closures are separate assembly stages.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 20

For artwork, vector files such as AI, EPS or PDF are preferred because they scale cleanly for printing and embroidery. High-resolution PNG or PSD f

Accepted Answer

What file formats do you accept for jackets & shirts artworkThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery is the most common treatment on outerwear because the panel area is large, with patches and appliqué used for heavier graphics. Checks centre on zip and button function, panel alignment, lining attachment and measurement tolerance at the shoulder..Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 21

Yes. We can turn sketches or reference images into production-ready specifications covering measurements and grading, fabric and trim selection, se

Accepted Answer

Can you convert my sketches into a production-ready tech pack for jackets & shirThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery is the most common treatment on outerwear because the panel area is large, with patches and appliqué used for heavier graphics. Checks centre on zip and button function, panel alignment, lining attachment and measurement tolerance at the shoulder..Freight is quoted as its own line so the transit cost is visible before the goods are finished.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Size approval happens on the sample, and the approved size set stays with the order for future repeats.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Where a finish cannot be confirmed on a given fabric, we say so rather than commit to it and correct it later.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 22

Yes. Our development team supports ODM projects by proposing fabrics, fits, construction details and decoration approaches based on your concept or

Accepted Answer

Do you have an in-house design team to help develop jackets & shirtsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Shell choice spans denim, twill, canvas, nylon, faux leather and coated fabrics, and the shell is the single largest driver of cost and perceived quality. Lining, interfacing, closures and pocket construction decide how the jacket hangs, and a jacket collapses around the shoulders when those are rushed..Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.We would rather raise a risk before sampling than discover it during bulk production.Production checks happen at cutting, at sewing, at finishing and before packing.Special techniques are tested on the actual material, because they behave differently across fabrics.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 23

Yes. We can develop a complete collection rather than a single style, covering tops, bottoms, outerwear and accessories as needed. Collection devel

Accepted Answer

Can you develop a full bags collection rather than a single styleThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Screen print and embroidery both work on canvas, while webbing labels and rubber patches suit utility styling. Checks concentrate on strap pull strength, zip function and seam integrity at the base..We ask for the quantity per colour rather than a single total, because that is what the minimum applies to.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Fabric and trims are checked against your specification rather than assumed, because a substitution changes the wash result.Decoration placement and technique are settled on the physical sample instead of on a screen.Handle attachment, base reinforcement and zip quality are the structural decisions, and a bag that fails usually fails at the strap join rather than the shell.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 24

Either works. A complete tech pack speeds development, because measurements, materials and construction are defined from the start. If you only hav

Accepted Answer

What do you need from me to start a jackets & shirts sample — a tech pack or a rThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Shell choice spans denim, twill, canvas, nylon, faux leather and coated fabrics, and the shell is the single largest driver of cost and perceived quality. Lining, interfacing, closures and pocket construction decide how the jacket hangs, and a jacket collapses around the shoulders when those are rushed..Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.If your launch date is fixed, work backwards from it and treat sampling, bulk and freight as three separate bookings.Colour is the variable that multiplies an order, which is why it is worth deciding the colour count early.Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Every order is checked at cutting, sewing, finishing and before packing, with the approved sample as the reference for the whole run.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 25

Yes. We can ship a physical sample before you commit to bulk production. Sampling is quoted separately and confirmed in advance, and the courier co

Accepted Answer

Can you ship a physical sample of jackets & shirts before I commitFreight choice is a trade-off between your drop date and your landed cost, and it is set per order.Embroidery is the most common treatment on outerwear because the panel area is large, with patches and appliqué used for heavier graphics. Checks centre on zip and button function, panel alignment, lining attachment and measurement tolerance at the shoulder..Freight is quoted as its own line so the transit cost is visible before the goods are finished.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.We would rather raise a risk before sampling than discover it during bulk production.Production checks happen at cutting, at sewing, at finishing and before packing.Lead time is among the longest of any category because lining, interfacing and closures are separate assembly stages.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Raise it at the first conversation and it is confirmed in the quotation, alongside the specification and the timeline.

Question 26

We treat client designs, fabrics and supplier information as confidential. An NDA can be signed before we review your designs or samples, and inter

Accepted Answer

How do you handle intellectual property and confidentiality for bags designsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Tote and crossbody bodies use canvas, cotton duck, ripstop nylon or coated polyester, chosen for how they carry load rather than how they look alone. Handle attachment, base reinforcement and zip quality are the structural decisions, and a bag that fails usually fails at the strap join rather than the shell..Sampling is quoted separately and confirmed upfront, and the schedule is agreed in the quotation.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Freight is quoted as its own line so the transit cost is visible before the goods are finished.Special techniques are tested on the actual material, because they behave differently across fabrics.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Our standard minimum is 100 pieces per style, per color, with sizes mixable inside one colourway and each colour treated as its own order.Tell us what you are planning and we will confirm the details in writing before any sampling begins. We reply to inquiries within one working day.

Question 27

Yes. After you approve the development sample, we produce a pre-production sample using the bulk fabric, trims and labels. This step confirms that

Accepted Answer

Do you provide a pre-production sample before mass production of jackets & shirtThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery is the most common treatment on outerwear because the panel area is large, with patches and appliqué used for heavier graphics. Checks centre on zip and button function, panel alignment, lining attachment and measurement tolerance at the shoulder..Special techniques are tested on the actual material, because they behave differently across fabrics.A written brief shortens the first round, since the specification can be confirmed before sampling begins.Decoration placement and technique are settled on the physical sample instead of on a screen.Export packaging is specified with the style, which is what keeps labelling and packing consistent between runs.A purchase order is matched to the approved sample, which is the reference both sides measure against.Lining, interfacing, closures and pocket construction decide how the jacket hangs, and a jacket collapses around the shoulders when those are rushed.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 28

For artwork, vector files such as AI, EPS or PDF are preferred because they scale cleanly for printing and embroidery. High-resolution PNG or PSD f

Accepted Answer

What file formats do you accept for bags artworkThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Tote and crossbody bodies use canvas, cotton duck, ripstop nylon or coated polyester, chosen for how they carry load rather than how they look alone. Handle attachment, base reinforcement and zip quality are the structural decisions, and a bag that fails usually fails at the strap join rather than the shell..Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Production checks happen at cutting, at sewing, at finishing and before packing.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Confirming the specification in writing before cutting is what keeps a first order and a reorder matching each other.Sampling typically takes around two weeks, and bulk production typically takes three to four weeks after the sample is approved.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

Question 29

The number of included revision rounds depends on the style and on how many changes are requested, so it is confirmed in the sampling quotation rat

Accepted Answer

How many sample revisions are included for jackets & shirtsThe practical answer depends on your specification rather than on a standard figure, which is why we confirm it in the quotation.Embroidery is the most common treatment on outerwear because the panel area is large, with patches and appliqué used for heavier graphics. Checks centre on zip and button function, panel alignment, lining attachment and measurement tolerance at the shoulder..We would rather raise a risk before sampling than discover it during bulk production.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.Each colour is dyed, cut and finished as its own group, so consistency is maintained colour by colour.The approved sample is kept as the working reference so a repeat order behaves like the first one.Bulk production starts once the sample is approved in writing, not while the specification is still moving.Lead time is among the longest of any category because lining, interfacing and closures are separate assembly stages.Sampling is charged separately and quoted upfront, and it may be credited against the bulk order only where the bulk quantity is large enough.If you would like this applied to a specific style, share the reference and the volume you have in mind and we will answer directly.

Question 30

Yes. We can turn sketches or reference images into production-ready specifications covering measurements and grading, fabric and trim selection, se

Accepted Answer

Can you convert my sketches into a production-ready tech pack for bagsThis is confirmed per style, because the answer depends on the fabric, the construction and the finish you choose.Tote and crossbody bodies use canvas, cotton duck, ripstop nylon or coated polyester, chosen for how they carry load rather than how they look alone. Handle attachment, base reinforcement and zip quality are the structural decisions, and a bag that fails usually fails at the strap join rather than the shell..The approved sample is kept as the working reference so a repeat order behaves like the first one.Specification changes after cutting are avoided deliberately, since they are the most expensive place to make a change.Decoration placement and technique are settled on the physical sample instead of on a screen.Material and social compliance are confirmed per project, so the certificate that applies is the one for your fibre content.Sizing is agreed inside one colourway, so a size run can follow your real sales curve.We hold BSCI social compliance certification, and material certifications such as OEKO-TEX are confirmed per project at the quotation stage.Send us the style, the quantity per colour and your target date, and we will come back with what is realistic rather than theoretical.

FAQs

Are you looking for a reliable manufacturer?

Products

Customization

Business Model

Capability

About Us